[vdr] Re: CAM problems - revisited - solution!

["Reinhard Walter Buchner" <rw.buchner@freenet.de>]

Hi Klaus,

> > One more thing I forgot to mention: The old RTL-2 trigger problem
> > is back. That is if I run VDR w/o a CAM inserted, RTL-2 is as
> > clean as a whistle. Once a CAM is inserted (no matter which one
> > or where). RTL-2 starts getting flaky (parts of the picture turn green
> > or are distorted). It is not necessary (nor does it make a difference)
> > to have a smartcard in the CAM(s). It seems like something in the
> > RTL-2 stream triggers either the AV711x (as it too can decrypt)
> > or the LL firmware. I don't get any unusual mesages in (both eit.c
> > & ci. are set to debug status) the logs, tho. Oh, and the newest
> > Haupauge Windoz soft (2.15b) has the same problem ;o))
 
> Does this happen all the time?
> I just gave it a quick try and tuned my DVB card that has the CI
> attached to RTL2, but nothing was wrong with the picture.

Just guessing, but roughly every 30 seconds there is an interuption
in the picture (pixelation or color change). Did you have your CAM
inserted into the CI? As soon as I remove the CAM from the CI
the problem disappears.

Greetz,
Reinhard


---
Mail is certified Virus Free.
Checked by AVG anti-virus system (http://www.grisoft.com).
Version: 6.0.488 / Virus Database: 287 - Release Date: 05.06.2003



-- 
Info:
To unsubscribe send a mail to ecartis@linuxtv.org with "unsubscribe vdr" as subject.