[vdr] Re: CAM problems - revisited - solution!

[Klaus Schmidinger <Klaus.Schmidinger@cadsoft.de>]

Reinhard Walter Buchner wrote:
> 
> Hi Klaus,
> 
> > > One more thing I forgot to mention: The old RTL-2 trigger problem
> > > is back. That is if I run VDR w/o a CAM inserted, RTL-2 is as
> > > clean as a whistle. Once a CAM is inserted (no matter which one
> > > or where). RTL-2 starts getting flaky (parts of the picture turn green
> > > or are distorted). It is not necessary (nor does it make a difference)
> > > to have a smartcard in the CAM(s). It seems like something in the
> > > RTL-2 stream triggers either the AV711x (as it too can decrypt)
> > > or the LL firmware. I don't get any unusual mesages in (both eit.c
> > > & ci. are set to debug status) the logs, tho. Oh, and the newest
> > > Haupauge Windoz soft (2.15b) has the same problem ;o))
> 
> > Does this happen all the time?
> > I just gave it a quick try and tuned my DVB card that has the CI
> > attached to RTL2, but nothing was wrong with the picture.
> 
> Just guessing, but roughly every 30 seconds there is an interuption
> in the picture (pixelation or color change). Did you have your CAM
> inserted into the CI? As soon as I remove the CAM from the CI
> the problem disappears.

I did have the CAM inserted.
Guess this will have to wait until later...

Klaus
-- 
_______________________________________________________________

Klaus Schmidinger                       Phone: +49-8635-6989-10
CadSoft Computer GmbH                   Fax:   +49-8635-6989-40
Hofmark 2                               Email:   kls@cadsoft.de
D-84568 Pleiskirchen, Germany           URL:     www.cadsoft.de
_______________________________________________________________


-- 
Info:
To unsubscribe send a mail to ecartis@linuxtv.org with "unsubscribe vdr" as subject.