[vdr] Re: CAM Aston 1.05 CI 1.6 detected by vdr 1.2.1

To: vdr@linuxtv.org
Subject: [vdr] Re: CAM Aston 1.05 CI 1.6 detected by vdr 1.2.1
From: Antonino Sergi <voyaser@tiscalinet.it>
Date: 14 Jul 2003 14:59:35 +0200
Content-type: text/plain
In-reply-to: <3F1182B9.1D681F18@cadsoft.de>
Organization: Evolution Enterprises
References: <1058092310.14302.31.camel@darwin.roma1.infn.it> <3F1182B9.1D681F18@cadsoft.de>
Reply-to: vdr@linuxtv.org
Sender: vdr-bounce@linuxtv.org

About FTA channels there was a problem about frequencies:
some frequency work with old version of VDR and driver (1.0.4/0.9.4) and
not with 1.1.x or 1.2.1/NEWSTRUCT, but updating to more correct
frequencies everything works fine for FTA channels.

About my new (testing) setup, using the checklist from cams.txt,
everything works except step 9 (decrypt), but I guess that, about this,
we can help each other.

Thanks  

On Sun, 2003-07-13 at 18:03, Klaus Schmidinger wrote:
> Antonino Sergi wrote:
> > 
> > Hi,
> > 
> > My setup is:
> > Nexus-s rev 2.2
> > CI rev 1.6 (3.5")
> > CAM Aston rev 1.05
> > kernel 2.4.18-14 (from RedHat 8)
> > driver linux-dvb.2003-06-08
> > vdr-1.2.1
> > 
> > CAM is detected every time vdr starts, I can access to CAM menu without
> > problems and see any information correctly, but it does not decrypt, and
> > I cannot even watch FTA channels.
> > 
> > Here is a log for CAM communication and, at the bottom, some lines from
> > a log about old firmware/driver use to compare (if useful).
> > 
> > Starting vdr:
> > Resetting slot 0...ok.
> > Resetting slot 1...ok.
> > Module ready in slot 0
> > Creating connection: slot 0, tcid 1
> > --> 00 01 82 01 01
> > <-- 00 01 83 01 01 80 02 01 00
> >     .  .  .  .  .  .  .  .  .
> > --> 00 01 A0 01 01
> > <-- 00 01 80 02 01 80
> >     .  .  .  .  .  .
> > --> 00 01 81 01 01
> > <-- 00 01 A0 07 01 91 04 00 01 00 41 80 02 01 00
> >     .  .  .  .  .  .  .  .  .  .  A  .  .  .  .
> > OpenSession 00010041
> > New Resource Manager (session id 1)
> > --> 00 01 A0 0A 01 92 07 00 00 01 00 41 00 01
> > <-- 00 01 80 02 01 00
> >     .  .  .  .  .  .
> > 1: ==> Profile Enq
> > --> 00 01 A0 09 01 90 02 00 01 9F 80 10 00
> > <-- 00 01 80 02 01 00
> >     .  .  .  .  .  .
> > --> 00 01 A0 01 01
> > <-- 00 01 80 02 01 80
> >     .  .  .  .  .  .
> > --> 00 01 81 01 01
> > <-- 00 01 A0 82 00 09 01 90 02 00 01 9F 80 11 00 80 02 01 00
> >     .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .
> > 1: <== Profile
> > 1: ==> Profile Change
> > --> 00 01 A0 09 01 90 02 00 01 9F 80 12 00
> > <-- 00 01 80 02 01 00
> >     .  .  .  .  .  .
> > --> 00 01 A0 01 01
> > <-- 00 01 80 02 01 80
> >     .  .  .  .  .  .
> > --> 00 01 81 01 01
> > <-- 00 01 A0 82 00 09 01 90 02 00 01 9F 80 10 00 80 02 01 00
> >     .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .
> > 1: <== Profile Enquiry
> > 1: ==> Profile
> > --> 00 01 A0 1D 01 90 02 00 01 9F 80 11 14 00 01 00 41 00 02 00 41 00 03
> > 00 41 00 24 00 41 00 40 00 41
> > <-- 00 01 80 02 01 00
> >     .  .  .  .  .  .
> > --> 00 01 A0 01 01
> > <-- 00 01 80 02 01 80
> >     .  .  .  .  .  .
> > --> 00 01 81 01 01
> > <-- 00 01 A0 07 01 91 04 00 02 00 41 80 02 01 00
> >     .  .  .  .  .  .  .  .  .  .  A  .  .  .  .
> > OpenSession 00020041
> > New Application Information (session id 2)
> > --> 00 01 A0 0A 01 92 07 00 00 02 00 41 00 02
> > <-- 00 01 80 02 01 00
> >     .  .  .  .  .  .
> > 2: ==> Application Info Enq
> > --> 00 01 A0 09 01 90 02 00 02 9F 80 20 00
> > <-- 00 01 80 02 01 00
> >     .  .  .  .  .  .
> > --> 00 01 A0 01 01
> > <-- 00 01 80 02 01 80
> >     .  .  .  .  .  .
> > --> 00 01 81 01 01
> > <-- 00 01 A0 82 00 14 01 90 02 00 02 9F 80 21 0B 01 01 00 01 00 05 41 53
> > 54 4F 4E 80 02 01 00
> >     .  .  .  .  .  .  .  .  .  .  .  .  .  !  .  .  .  .  .  .  .  A  S
> > T  O  N  .  .  .  .
> > 2: <== Application Info
> > --> 00 01 A0 01 01
> > <-- 00 01 80 02 01 80
> >     .  .  .  .  .  .
> > --> 00 01 81 01 01
> > <-- 00 01 A0 07 01 91 04 00 03 00 41 80 02 01 00
> >     .  .  .  .  .  .  .  .  .  .  A  .  .  .  .
> > OpenSession 00030041
> > New Conditional Access Support (session id 3)
> > --> 00 01 A0 0A 01 92 07 00 00 03 00 41 00 03
> > <-- 00 01 80 02 01 00
> >     .  .  .  .  .  .
> > 3: ==> Ca Info Enq
> > --> 00 01 A0 09 01 90 02 00 03 9F 80 30 00
> > <-- 00 01 80 02 01 00
> >     .  .  .  .  .  .
> > --> 00 01 A0 01 01
> > <-- 00 01 80 02 01 80
> >     .  .  .  .  .  .
> > --> 00 01 81 01 01
> > <-- 00 01 A0 82 00 0B 01 90 02 00 03 9F 80 31 02 01 00 80 02 01 00
> >     .  .  .  .  .  .  .  .  .  .  .  .  .  1  .  .  .  .  .  .  .
> > 3: <== Ca Info 0100
> > --> 00 01 A0 41 01 90 02 00 03 9F 80 32 38 03 2A 97 01 00 23 01 09 20 01
> > 00 E5 E4 00 72 FF 08 00 00 00 00 00 00 00 1A ED E5 01 00 70 FF 10 00 00
> > 00 00 20 00 06 1A ED 00 00 A1 00 00 00 00 54 00 00 00 00 55 00 00
> > <-- 00 01 80 02 01 80
> >     .  .  .  .  .  .
> > --> 00 01 81 01 01
> > <-- 00 01 A0 07 01 91 04 00 24 00 41 80 02 01 00
> >     .  .  .  .  .  .  .  .  $  .  A  .  .  .  .
> > OpenSession 00240041
> > New Date Time (session id 4)
> > --> 00 01 A0 0A 01 92 07 00 00 24 00 41 00 04
> > <-- 00 01 80 02 01 00
> >     .  .  .  .  .  .
> > --> 00 01 A0 01 01
> > <-- 00 01 80 02 01 80
> >     .  .  .  .  .  .
> > --> 00 01 81 01 01
> > <-- 00 01 A0 82 00 0A 01 90 02 00 04 9F 84 40 01 00 80 02 01 00
> >     .  .  .  .  .  .  .  .  .  .  .  .  .  @  .  .  .  .  .  .
> > 4: <== Date Time Enq, interval = 0
> > 4: ==> Date Time
> > --> 00 01 A0 10 01 90 02 00 04 9F 84 41 07 CE 61 10 00 03 AB 00
> > <-- 00 01 80 02 01 00
> >     .  .  .  .  .  .
> > --> 00 01 A0 01 01
> > <-- 00 01 80 02 01 00
> >     .  .  .  .  .  .
> > Switching to an FTA channel
> > --> 00 01 A0 01 01
> > <-- 00 01 80 02 01 00
> >     .  .  .  .  .  .
> > No Image No Sound
> 
> If you don't even get audio/video with an FTA channel, you shouldn't expect
> to see a CA channel.
> 
> > Switching to an encrypted channel
> > --> 00 01 A0 4B 01 90 02 00 03 9F 80 32 42 03 2B 5D 01 00 32 01 09 2F 01
> > 00 E5 11 00 72 FF 08 00 00 00 00 00 00 00 1A ED E5 00 00 84 FF 00 00 04
> > 01 00 00 00 02 1A ED E5 01 00 70 FF 10 00 00 00 00 28 02 02 1A ED 00 00
> > A0 00 00 00 00 50 00 00
> > <-- 00 01 80 02 01 00
> >     .  .  .  .  .  .
> > --> 00 01 A0 01 01
> > <-- 00 01 80 02 01 00
> >     .  .  .  .  .  .
> > No Image No Sound
> > Switching to another encrypted channel
> > --> 00 01 A0 41 01 90 02 00 03 9F 80 32 38 03 2A 97 01 00 23 01 09 20 01
> > 00 E5 E4 00 72 FF 08 00 00 00 00 00 00 00 1A ED E5 01 00 70 FF 10 00 00
> > 00 00 20 00 06 1A ED 00 00 A1 00 00 00 00 54 00 00 00 00 55 00 00
> > <-- 00 01 80 02 01 00
> >     .  .  .  .  .  .
> > --> 00 01 A0 01 01
> > <-- 00 01 80 02 01 00
> >     .  .  .  .  .  .
> > No Image No Sound
> > 
> > If it can help, using old firmware/driver, switching to an encrypted
> > channel:
> > Jul  6 16:15:13 desktop kernel: dvb0: 0e 00 41 00 00 00 A
> > Jul  6 16:15:13 desktop kernel: dvb0: 0c 00 0d 08 2e 00 5f 95 00 00 ff
> > ff 2e 08 8e 60 00 00 00 90 00 00 00 00 2e
> >  08 8e f0 2e 00 df 2f   . _     .  `        .   .  /
> 
> Which "old" firmware/driver is this?
> Did you get audio/video on FTA and/or CA channels with that one?
> 
> Klaus
> -- 
> _______________________________________________________________
> 
> Klaus Schmidinger                       Phone: +49-8635-6989-10
> CadSoft Computer GmbH                   Fax:   +49-8635-6989-40
> Hofmark 2                               Email:   kls@cadsoft.de
> D-84568 Pleiskirchen, Germany           URL:     www.cadsoft.de
> _______________________________________________________________
-- 
Antonino Sergi <voyaser@tiscalinet.it>
Evolution Enterprises



-- 
Info:
To unsubscribe send a mail to ecartis@linuxtv.org with "unsubscribe vdr" as subject.

References:
- [vdr] CAM Aston 1.05 CI 1.6 detected by vdr 1.2.1
  - From: Antonino Sergi <voyaser@tiscalinet.it>
- [vdr] Re: CAM Aston 1.05 CI 1.6 detected by vdr 1.2.1
  - From: Klaus Schmidinger <Klaus.Schmidinger@cadsoft.de>

Prev by Date: [vdr] Re: CAM Aston 1.05 CI 1.6 detected by vdr 1.2.1
Next by Date: [vdr] Re: wich card-rev. to get to use rgb out?
Previous by thread: [vdr] Re: CAM Aston 1.05 CI 1.6 detected by vdr 1.2.1
Next by thread: [vdr] "Broken pipe" back again!
Index(es):
- Date
- Thread

Home | Main Index | Thread Index