[vdr] Re: Aston 1.05 ... not quite there

[Klaus Schmidinger <Klaus.Schmidinger@cadsoft.de>]

Miguel Sanchez wrote:
> 
> Hi there,
> 
> Trying to get working an Aston CAM 1.05 with Nexus and 1.6 3.5" CI
> 
> While ftp://ftp.cadsoft.de/vdr/Developer/cams.txt states a complete
> failure, mine is only partial as some steps do work (does it really
> matter? maybe not ...).
> 
> In my setup channel 1 is encrypted and 2 is free to air.
> 
> I see no other than a black screen for channel 1, while 2 works just fine.
> 
> I do not know if any of this info can be useful.
> 
> This is the dialog showing on my terminal:
> 
> --> 00 01 A0 01 01
> <-- 00 01 80 02 01 00
>    .  .  .  .  .  .
> --> 00 01 A0 01 01
> <-- 00 01 80 02 01 00
>    .  .  .  .  .  .
> --> 00 01 A0 01 01
> <-- 00 01 80 02 01 00
>    .  .  .  .  .  .
> --> 00 01 A0 01 01
> <-- 00 01 80 02 01 00
>    .  .  .  .  .  .
> --> 00 01 A0 01 01
> <-- 00 01 80 02 01 00
>    .  .  .  .  .  .
> --> 00 01 A0 01 01
> <-- 00 01 80 02 01 00
>    .  .  .  .  .  .
> --> 00 01 A0 01 01
> <-- 00 01 80 02 01 00
>    .  .  .  .  .  .
> --> 00 01 A0 01 01
> <-- 00 01 80 02 01 00
>    .  .  .  .  .  .
> --> 00 01 A0 01 01
> <-- 00 01 80 02 01 00

This is just the normal "idle" communication between VDR and the CAM.
There should be other lines with more bytes going back and forth, especially
when you switch to an encrypted channel.

> As soon as I remove the smartcard VDR shows a message asking for it.
> 
> Logfile and result matrix are show below.
> 
> I'm using linux-dvb.2003-06-08 recomended driver (kernel 2.4.20 from
> suse 8.2).
> 
> Any help is appreciated.
> 
> Miguel Sanchez
> 
> Aug  2 17:31:15 msanchez vdr[6418]: VDR version 1.2.1 started
> Aug  2 17:31:15 msanchez vdr[6418]: loading /video/setup.conf
> Aug  2 17:31:15 msanchez vdr[6418]: ERROR: unknown config parameter: Style = 0
> Aug  2 17:31:15 msanchez vdr[6418]: loading /video/channels.conf
> Aug  2 17:31:15 msanchez vdr[6418]: loading /video/timers.conf
> Aug  2 17:31:15 msanchez vdr[6418]: loading /video/svdrphosts.conf
> Aug  2 17:31:15 msanchez vdr[6418]: loading /video/ca.conf
> Aug  2 17:31:15 msanchez vdr[6418]: loading /video/remote.conf
> Aug  2 17:31:15 msanchez vdr[6418]: probing /dev/dvb/adapter0/frontend0
> Aug  2 17:31:15 msanchez vdr[6421]: EIT processing thread started (pid=6421) - master
> Aug  2 17:31:15 msanchez vdr[6422]: tuner thread started on device 1 (pid=6422)
> Aug  2 17:31:15 msanchez vdr[6418]: probing /dev/dvb/adapter1/frontend0
> Aug  2 17:31:15 msanchez vdr[6418]: found 1 video device
> Aug  2 17:31:15 msanchez vdr[6418]: setting primary device to 1
> Aug  2 17:31:15 msanchez vdr[6418]: SVDRP listening on port 2001
> Aug  2 17:31:15 msanchez vdr[6423]: KBD remote control thread started (pid=6423)
> Aug  2 17:31:15 msanchez vdr[6418]: remote control KBD - keys known
> Aug  2 17:31:15 msanchez vdr[6418]: switching to channel 1
> Aug  2 17:31:15 msanchez vdr[6418]: reading EPG data from /video/epg.data
> Aug  2 17:31:16 msanchez vdr[6421]: CAM: 88C0 11038 30400 0100     64 05DC - 09 11 01 00 E5 DC 00 64 FF 00 00 00 00 08 01 00 06 1B 02
> Aug  2 17:31:17 msanchez vdr[6421]: CAM: 88C0 11038 30403 0100     64 05E2 - 09 11 01 00 E5 E2 00 64 FF 01 00 00 00 00 01 00 86 1B 02
> Aug  2 17:31:17 msanchez vdr[6421]: CAM: 88C0 11038 30404 0100     64 05E4 - 09 11 01 00 E5 E4 00 64 FF 00 00 00 04 00 00 80 06 1B 02
> Aug  2 17:31:17 msanchez vdr[6421]: CAM: 88C0 11038 30405 0100     64 05E5 - 09 11 01 00 E5 E5 00 64 FF 00 00 00 00 01 00 80 06 1B 02
> Aug  2 17:31:18 msanchez vdr[6421]: CAM: 88C0 11038 30406 0100     64 05E6 - 09 11 01 00 E5 E6 00 64 FF 00 00 00 00 00 20 80 06 1B 02
> Aug  2 17:31:18 msanchez vdr[6421]: CAM: 88C0 11038 30407 0100     64 05E7 - 09 11 01 00 E5 E7 00 64 FF 00 00 00 20 00 00 80 06 1B 02
> Aug  2 17:31:19 msanchez vdr[6421]: CAM: 88C0 11038 30410 0100     64 05EB - 09 11 01 00 E5 EB 00 64 FF 00 00 00 00 00 01 00 06 1B 02
> Aug  2 17:31:20 msanchez vdr[6422]: CAM: ASTON, 01, 0100, 0100
> Aug  2 17:31:20 msanchez vdr[6421]: CAM: 88C0 11038 30411 0100     64 05ED - 09 11 01 00 E5 ED 00 64 FF 00 00 00 00 00 04 00 06 1B 02
> Aug  2 17:31:30 msanchez vdr[6418]: switching to channel 2
> Aug  2 17:31:35 msanchez vdr[6418]: switching to channel 1
> 
>                               1      2      3      4      5      6  7      8      9       Old   Mult Notes
> *** Test results 1.2.1:
> Aston 1.05                    ok     ok     ok     ok     ok     ok fail   fail   fail    ???   CA descriptors do show up at the beginning
> CI rev 1.6 (3.5")

What I would need to see is whether VDR sends these descriptors to the CAM when
you switch to an encrypted channel (see above).

BTW: when sending log file excerpts, please don't wrap them (I had to edit your
lines to make them easily readable).

Klaus


-- 
Info:
To unsubscribe send a mail to ecartis@linuxtv.org with "unsubscribe vdr" as subject.