Mailing List archive
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[vdr] Re: sound clicks and "block artefacts" with Nova-CI
On Sat, 2003-08-23 at 15:43, Andreas Vierengel wrote:
> Hi,
>
> I have used VDR for 3 month so far with a Nexus-s(rev 2.1) and nova-ci
> (rev 1.1) connected via a sat-multiswitch (no diseqc) without problems.
> A few days ago I bought new computer hardware:
> P4-Celeron 2.4GHz, MSI-845-GE MAX-L Mainboard, 350W Enermax Powersupply
> and a new computer case.
> My old system was an 433 MHz Celeron (PII) on an asus p2l97 Maibnboard.
> storage-system: 4x 120GB Seagate IDE => software raid5 and raid1 for
> booting.
>
> Sofware is/was: debian linux 3.0, vanilla-kernel 2.4.21, vanilla
> vdr-1.2.2, liunxtv-dvb-1.0.0, gcc-2.95.4
>
> My problem is:
> recording on Nova-CI ( I don't use a cam-module at the moment) produces
> sound clicks, block-artefacts and small skips on every channel. The
> recording is not usable anymore :(
> recording on my nexus-s works perfectly the same like in my old
> computer-system.
>
> I changed PCI-Slots for both cards, tested any pci-latency setting,
> tested shared/unshared interrupt combinations => no effect.
>
> On software side I only rebuilt my kernel with optimization for P4,
> recompiled DVB-drivers and VDR.
>
> The whole thing is driving me nuts, so I'm at the point to throw out the
> nova and buy another nexus...
>
> What can I do further to investigate the problem ?
> Thanks in advance for any help !!
>
> --Andi
>
>
Check if DMA for HD is on.
Timo
--
Info:
To unsubscribe send a mail to ecartis@linuxtv.org with "unsubscribe vdr" as subject.
Home |
Main Index |
Thread Index