[vdr] Re: [PATCH] CAM handling

[Hans-Peter Raschke <Hans-Peter.Raschke@Wintermann-DatenService.de>]

Hello Liam,

lischuh@web.de wrote:
> vdr@linuxtv.org schrieb am 26.08.03 10:50:46:
>
> > Hello,
> >
> > I would like to post a patch which made my SkyCrypt-CAM working 
> > (decrypting) with the ll-version of the firmware. So it would be fine if 
> > CAM-owners (not only SkyCrypt) could test this patch and report their 
> > results to the list. Menue issues and communication problems of the CAM 
> > are not cured.
> >
> > This patch is against plain vdr-1.2.2. The linuxdvb version is 1.0.0.
> >
> > Hans-Peter
>
> Hi Hans-Peter,
>
> my Icecrypt Module works after applying your patch.
> But now there is a problem with my Alphacrypt Module (FW 2.01).
> After starting VDR and switching to Premiere 1 or Premiere 2 there is no picture.
> After switching to another Premiere channel and switching back to Premiere 1 or Premiere 2 it works.
>
> My observations:
> First:
> 1. Starting VDR
> 2. Switching to Premiere 1 - No picture
> 3. Switching to Premiere 2 - OK
> 4. Switching to Premiere 1 - OK
> 5. Stopping VDR
>
> Second:
> 1. Starting VDR
> 2. Switching to Premiere 2 - No picture
> 3. Switching to Premiere 1 - OK
> 4. Switching to Premiere 2 - OK
> 5. Stopping VDR
>
> Third:
> 1. Starting VDR
> 2. Switching to Premiere Nostalgie - OK
> 3. Switching to Premiere 1 - OK
> 4. Stopping VDR
>
> This is a really bad behavior, because recording on Premiere 1 or 2 is not possible.
> But why does it only happen on Premiere 1 and Premiere 2?
thank you for your observations. I'll try that at home if my CAM Irdeto 
4.7 shows the same behavior.

The difference between Premiere 1/2 and other Premiere channels is the 
presence auf AC3. Are the AC3-PIDs set in your channels.conf?

> Best regards
> Liam
Hans-Peter




--
Info:
To unsubscribe send a mail to ecartis@linuxtv.org with "unsubscribe vdr" as subject.