[vdr] Re: analogtv CVS171103 Problems

[Uwe Ortner <uwe.ortner@classic-net.de>]

Am Mon, 2003-11-17 um 13.52 schrieb Karsten Müller:
> -----BEGIN PGP SIGNED MESSAGE-----
> 
> Looks pretty much like mine:
> 
> ioctl: IVTV_IOC_G_CODEC
> Codec parameters
> aspect      : 2
> audio       : 0x00a9
> bframes     : 3
> bitrate_mode: 0
> bitrate     : 1500000
> bitrate_peak: 2250000
> dnr_mode    : 0
> dnr_spatial : 0
> dnr_temporal: 0
> dnr_type    : 0
> framerate   : 1
> framespergop: 12
> gop_closure : 1
> pulldown    : 0
> stream_type : 0
> ioctl: VIDIOC_G_FMT
> 	Type   : Video Capture
> 	Width  : 480
> 	Height : 576
> ioctl: VIDIOC_QUERYCAP
> 	Driver name   : ivtv
> 	Card type     : Vanilla iTVC15 card
> 	Bus info      : 0
> 	Driver version: 1
> 	Capabilities  : 0x01030001
> ioctl: VIDIOC_ENUMINPUT
> 	Name    : Composite 0
> 	Type    : 0x00000002
> 	Audioset: 0x00000001
> 	Tuner   : 0x00000000
> 	Standard: 0x              FF ( PAL )
> 	Status  : 0
> 	Name    : Composite 1
> 	Type    : 0x00000002
> 	Audioset: 0x00000001
> 	Tuner   : 0x00000000
> 	Standard: 0x              FF ( PAL )
> 	Status  : 0
> 	Name    : Composite 2
> 	Type    : 0x00000002
> 	Audioset: 0x00000001
> 	Tuner   : 0x00000000
> 	Standard: 0x              FF ( PAL )
> 	Status  : 0
> 	Name    : Composite 3
> 	Type    : 0x00000002
> 	Audioset: 0x00000001
> 	Tuner   : 0x00000000
> 	Standard: 0x              FF ( PAL )
> 	Status  : 0
> 	Name    : Tuner 0
> 	Type    : 0x00000001
> 	Audioset: 0x00000000
> 	Tuner   : 0x00000000
> 	Standard: 0x              FF ( PAL )
> 	Status  : 0
> 	Name    : Composite 4
> 	Type    : 0x00000002
> 	Audioset: 0x00000001
> 	Tuner   : 0x00000000
> 	Standard: 0x              FF ( PAL )
> 	Status  : 0
> 	Name    : S-Video 0
> 	Type    : 0x00000002
> 	Audioset: 0x00000001
> 	Tuner   : 0x00000000
> 	Standard: 0x              FF ( PAL )
> 	Status  : 0
> 	Name    : S-Video 1
> 	Type    : 0x00000002
> 	Audioset: 0x00000001
> 	Tuner   : 0x00000000
> 	Standard: 0x              FF ( PAL )
> 	Status  : 0
> 	Name    : S-Video 2
> 	Type    : 0x00000002
> 	Audioset: 0x00000001
> 	Tuner   : 0x00000000
> 	Standard: 0x              FF ( PAL )
> 	Status  : 0
> 	Name    : S-Video 3
> 	Type    : 0x00000002
> 	Audioset: 0x00000001
> 	Tuner   : 0x00000000
> 	Standard: 0x              FF ( PAL )
> 	Status  : 0
> ioctl: VIDIOC_G_INPUT
> Input = 4
> ioctl: VIDIOC_G_FREQUENCY
> Frequency = 2692
> ioctl: VIDIOC_ENUMSTD
> 	ID          : 0x            3000
> 	Name        : NTSC
> 	Frame period: 1001/30000
> 	Frame lines : 525
> 	ID          : 0x              FF
> 	Name        : PAL
> 	Frame period: 1/25
> 	Frame lines : 625
> 	ID          : 0x          7F0000
> 	Name        : SECAM
> 	Frame period: 1/25
> 	Frame lines : 625
> ioctl: VIDIOC_G_STD
> Standard = 0x000000ff
> ioctl: VIDIOC_QUERYCTRL
> Brightness = 127
> Contrast = 63
> Saturation = 67
> Hue = -16
> Volume = 65535
> Mute = 0
> 
> 
> Why do you have the ivtv device on /dev/video2 ?
> Shouldn't it be /dev/video0 as Andreas Kool recommends in his README ?
> 
> 

Because "vdradmin" uses the first device (/dev/video0) for the TV
screenshots

I tried both, there is no difference ...



-- 
Info:
To unsubscribe send a mail to ecartis@linuxtv.org with "unsubscribe vdr" as subject.