[vdr] Re: LIRC on vdr 1.2.6.

[Marko Myllymäki <marko.myllymaki@sci.fi>]

> Hit enter too quickly. What I meant was did you really make
> VDR correctly the last time. I speak from experience.......
> A quick MAKE, and then I wonder why desn't my remote work
> anymore?
> That was always my problem. I hope I won't forget it again.

> > I have compiled VDR with REMOTE=LIRC and insmodded lirc_serial with UART
> > disabled on ttyS1. In addition lircd is running with configuration
> > loaded from my lircd.conf file.
> >
> > Teaching the keys to configuration file lircd.conf worked just fine and
> > I even used the key-names as defined in previous vdr sources. Irrecord
> > told me, that I have RC-5 remote controller.
> >
> > I have had VDR running with same hardware before,but as trying a fresh
> > install of newer VDR I can not get it to work. (I have removed all old
> > configuration files aswell).
> >
> > The VDR just wont accept any remote keys on LIRC learning mode, which
> > have teached to LIRC.

Brian, your first reply made me doubt and I make VDR again with REMOTE=LIRC
and VFAT=1.

Still I cannot teach keys to VDR. I must admit, that I am little confused
now as I have tested almost everything even with VDR 1.2.0 and still no
success.

Could you try to rename your config file to something else then .conf and
try to teach LIRC keys again? It might fail, as I have removed all my config
files (except channels.conf).

Br. Marko.



-- 
Info:
To unsubscribe send a mail to ecartis@linuxtv.org with "unsubscribe vdr" as subject.