vdr June 2007

vdr@linuxtv.org

93 participants
85 discussions

Beta version of vdr with dvb-s2 support
by jlac vdr 08 Jul '07

08 Jul '07

Hi, This is a beta version of vdr which support dvb-s2. So this version is able to watch TVHD through a streaming plugin (streamdev plugin is include in archive). http://www.freewebs.com/jlacvdr/vdr-s2hd/vdr-1.4.6-s2hd-070630.tar.bz2 The DVB-S2 channels must have 'M8' in modulation field of channels.conf, for example: ASTRAPROMO_HD:12721:hC23M8:S19.2E:22000:767:768:0:0:10202:1:1119:0 tested with: - linux 2.6.19 - TT3200 card (manu drivers and laasa patch) JLac

6 6

subtitles-0.5.0 and gentoo
by JJussi 07 Jul '07

07 Jul '07

Hi! I have problem with YLE and subtitles. Subtitles work on "live", but can't see them when watching recording.. OK, If I have understand right the information what I found from net, that should be fixed at subtitles-0.5.0.. So.. I use gentoo and it's packeting system. How I can include this 0.5.0 version to my system, gentoo have only 0.4.0 version on it's repository.. Who is upkeeping vdr stuff at gentoo side... (OK, that "who" should insert vdr-1.4.7 too) Is only solution to "override" whole gentoo packeting system and compile everything itself? -- JJussi

4 4

future VDR and Netсeiver OEM from Reelmultimedia
by Igor 04 Jul '07

04 Jul '07

Hello http://reel-multimedia.com/rmm-english/netceiver.html here's a good platform for future hdtv-vdr Are you agree ? :) Igor

13 45

changing default font
by Stone 02 Jul '07

02 Jul '07

When I select a different default font for vdr to use (other than San Serif), and save it to setup.conf, vdr does not use the newly selected default font upon startup. It seems vdr keeps defaulting back to the original default font. Has anyone noticed this too? Best Regards.

3 3

Problem with multiple audio channels and DVB subtitles in recordings (YLE Teema)
by Ville Aakko 01 Jul '07

01 Jul '07

Hi! I've had problems with two episodes of a documentary series about drugs and the human brain running on Finnish YLE Teema (originally a French documentary by ARTE France NOVAPROD OWL). The audio channels are labeled wrongly in the recordings (there is the original French commentary / dubbed interviews and one with Finnish commentary / original interviews), but more importantly, subtitles are not replayed in the recordings! I've had no problems with DVB subtitles on other recordings I've made. Wathing the program in real-time has no problems, there I can see the subtitles without problems. Only the recordings have problems. Is this problem only on my setup? I haven't checked into this in more detail yet, but those who are interested (btw. the series is really interesting) and also live in Finland, please check if you can record this correctly. There is a rerun today of the 3rd episode: YLE Teema: 18.00 Huumetta aivoille And, since this is a 5-episode series, there'll be opportunities (2x2) to debug this one. The series runs on thursdays (21.00 EEST), and re-runs on saturdays (18.00 EEST). I'm watching in the Oulu region via DVB-C (OPOY/3KTV). I'm using Gentoo, and vdr 1.4.6, with bigpatch, and subtitles 0.4.0. The newest vdr is not in Gentoo yet (we -- -- Ville Aakko - ville.aakko(a)gmail.com

7 20

vdr-1.5.5: red/green/yellow/blue doesn't work anymore
by Torgeir Veimo 01 Jul '07

01 Jul '07

I just upgraded to vdr 1.5.5 and now the colour buttons on the remote doesn't work anymore when there's no OSD. If I press the menu button first they work. Is there a new setting that can have this effect? -- Torgeir Veimo torgeir(a)pobox.com

2 2

setting tv standard in /dev/video0
by Stone 01 Jul '07

01 Jul '07

Hi, I am currently using VDR with a Nexus-S FF card in an NTSC environment. For a long time, I could never get the correct tv standard (NTSC) while trying to watch television via VDRAdmin. I recently noticed that once I stream VDR using VLC and its v4l interface, something in /dev/video0 gets set to NTSC, because from then on, the video is correctly set to NTSC mode and I can watch television via the VDRAdmin television interface. Here is the VLC command I'm using: vlc -vvv v4l:/dev/video0:adev=/dev/dsp:audio=1:norm=ntsc:size=352x240 --sout '#transcode{vcodec=DIV3,vb=64,acodec=mp3,ab=48,deinterlace}:std{access=http,mux=asf,dst=:6789}' Notice how VLC is directly interacting with the video from /dev/video0 (this method only works with FF cards). Somehow, the v4l interface from VLC is setting the tv standard properly for /dev/video0 and fixing VDRAdmin for NTSC. Anyone have an idea whats going on? The firmware is set to NTSC as soon as the card tunes to a NTSC channel. Why would /dev/video0 not be set to NTSC until I stream it with VLC? Best Regards.

5 14

[PATCH] vdr-burn-0.1.0_pre21 using correct charset with >=vdr-1.5.3
by Matthias Schwarzott 30 Jun '07

30 Jun '07

Hi there! The attached patch lets vdr-burn-0.1.0_pre21 use the correct charset that vdr itself uses. This stops vdr-burn to double utf8 encode texts. Matthias -- Matthias Schwarzott (zzam)

1 0

vdr-1.5.3 - issue with translations out of plugins
by Joachim Wilke 30 Jun '07

30 Jun '07

Hi Klaus, I just installed vdr-1.5.3, but lcdproc plugin caused vdr to crash on startup. I figured out that the problem is the translation of the string "Volume ". Unlike the other strings that are used by the plugin this string is provided by the vdr-core i18n.c This worked fine in vdr-1.5.1. Adding a dummy translation of "Volume " directly in the plugins i18n.c "fixed" the crash. Is this the intended behaviour? Or was this a feature by accident? ;-) Regards, Joachim.

8 14

vdr-ttxtsubs in vdr developer versions?
by Magnus Andersson 29 Jun '07

29 Jun '07

Hello! Does vdr-ttxtsubs plugin work with any of the latest vdr developer versions? I have patched vdr with vdr-1.5.5-subtitles-0.5.0-and-ttxtsubs-0.0.5.diff and the plugin itself with vdr-ttxtsubs-0.0.5-kermanekka-edition.diff. http://users.tkk.fi/~rahrenbe/vdr/ On my Gentoo amd64 system with kernel 2.6.20 I get this message when I try to compile: teletext.h:30: warning: ‘__packed__’ attribute ignored for field of type ‘uint8_t’ teletext.h:31: warning: ‘__packed__’ attribute ignored for field of type ‘uint8_t [2]’ teletext.h:32: warning: ‘__packed__’ attribute ignored for field of type ‘uint8_t [40]’ teletext.h:37: warning: ‘__packed__’ attribute ignored for field of type ‘uint8_t’ teletext.h:38: warning: ‘__packed__’ attribute ignored for field of type ‘ttxt_data_field [1]’ ttxtsubsdisplay.c: In member function ‘void cTtxtSubsDisplay::ShowOSD()’: ttxtsubsdisplay.c:415: error: ‘SetCode’ is not a member of ‘cFont’ ttxtsubsdisplay.c:415: error: ‘I18nCharSets’ was not declared in this scope ttxtsubsdisplay.c:438: error: ‘SetCode’ is not a member of ‘cFont’ ttxtsubsdisplay.c:463: error: ‘SetCode’ is not a member of ‘cFont’ make: *** [ttxtsubsdisplay.o] Error 1 /Svankan

4 7

← Newer
1
2
3
4
5
6
7
8
9
Older →

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

vdr June 2007