vdr July 2009

vdr@linuxtv.org

38 participants
46 discussions

Re: [vdr] vdrconvert-vdr-1.7.0+
by Mike Booth 13 Jul '09

13 Jul '09

there is a patch for Projectx b31 which was the version I got from cvs. I use vdr-1.7.8 and vdr-burn pre22 freom vdr portal and it works fine with vanilla vdr but not with the vdr-extensions patch. Mike

1 0

vdrconvert-vdr-1.7.0+
by Martin Gansser 12 Jul '09

12 Jul '09

I have also tested your patch with vdrconvert-0.2.0 but with a few Extensions in vdr2dvd.sh. The final error message in vdr2dvd.log says, that no audio traces exists. > Am Mittwoch, den 24.06.2009, 17:41 -0400 schrieb hu_emulator: > > I edited your changes and when I run vdrconvert with the new vdr2dvd.sh it > > errors out. Could you post or make available your vdr2dvd.sh? > > What kind of error do you get?

5 11

mplayer plugin - INFO: Source Video has Resolution of 0 x 0
by Goga777 11 Jul '09

11 Jul '09

Hi I couldn't play with mplayer plugin the ts-files recorded on VDR 178 Jul 11 17:36:26 arvdr vdr: [3904] mplayer: player thread started (pid=3126) Jul 11 17:36:26 arvdr vdr: [3899] TS buffer on device 1 thread ended (pid=3126, tid=3899) Jul 11 17:36:26 arvdr vdr: [3898] buffer stats: 60912 (2%) used Jul 11 17:36:26 arvdr vdr: [3898] receiver on device 1 thread ended (pid=3126, tid=3898) Jul 11 17:36:26 arvdr logger: *** Starting mplayer.sh Version 0.8.7 Jul 11 17:36:26 arvdr logger: *** DEBUG: Variable CFGFIL has value "/usr/bin/mplayer.sh.conf" Jul 11 17:36:27 arvdr logger: *** DEBUG: Variable USEAC3 has value "false" Jul 11 17:36:27 arvdr logger: *** DEBUG: Variable AC3AOUT has value "-ao alsa9 -ac hwac3" Jul 11 17:36:27 arvdr logger: *** DEBUG: Variable TV_ASPECT has value "16/9" Jul 11 17:36:27 arvdr logger: *** DEBUG: Variable PAL has value "true" Jul 11 17:36:27 arvdr logger: *** DEBUG: Variable NTSC has value "true" Jul 11 17:36:27 arvdr logger: *** DEBUG: Variable USE_SPEED has value "true" Jul 11 17:36:27 arvdr logger: *** DEBUG: Variable DETC_FILTER has value "detc=dr=2:am=1" Jul 11 17:36:27 arvdr logger: *** DEBUG: Variable MPLAYER has value "/usr/local/bin/mplayer" Jul 11 17:36:27 arvdr logger: *** DEBUG: Variable VOP has value "lavc=5000" Jul 11 17:36:27 arvdr logger: *** DEBUG: Variable VO has value "vdpau" Jul 11 17:36:27 arvdr logger: *** DEBUG: Variable AO has value "alsa" Jul 11 17:36:27 arvdr logger: *** DEBUG: Variable CACHE has value "4096" Jul 11 17:36:27 arvdr logger: *** DEBUG: Variable CACHESTR has value "-cache 4096" Jul 11 17:36:27 arvdr logger: *** DEBUG: Variable FRAMEDROP has value "true" Jul 11 17:36:27 arvdr logger: *** DEBUG: Variable FDSTR has value "-framedrop" Jul 11 17:36:27 arvdr logger: *** DEBUG: Variable LIRCRC has value "" Jul 11 17:36:27 arvdr logger: *** DEBUG: Variable LIRCSTR has value "" Jul 11 17:36:27 arvdr logger: *** DEBUG: Variable SUBTITLE has value " -subpos 80 -sub-bg-color 0 -sub-bg-alpha 30" Jul 11 17:36:27 arvdr logger: *** DEBUG: Variable REMOTE has value "-slave -nolirc" Jul 11 17:36:27 arvdr logger: *** Use Option USERDEF at your own risk! Jul 11 17:36:27 arvdr logger: *** DEBUG: Variable USERDEF has value "-fs -nolirc -slave -vc ffh264vdpau,ffmpeg12vdpau,f fvc1vdpau,ffwmv3vdpau -correct-pts -mc 100" Jul 11 17:36:27 arvdr logger: *** DEBUG: Variable XResPAL has value "352 480 528 544 704 720" Jul 11 17:36:27 arvdr logger: *** DEBUG: Variable XResNTSC has value "352 480 512 544 640 704 720" Jul 11 17:36:27 arvdr logger: *** DEBUG: Variable SLOW_CPU has value "false" Jul 11 17:36:27 arvdr logger: *** DEBUG: *** Option DVDFiles not set correctly! You will not be able to play VCD/DVD "" Jul 11 17:36:27 arvdr logger: *** DEBUG: Variable DVDFiles has value "" Jul 11 17:36:27 arvdr logger: *** DEBUG: *** Option DVD not set correctly! You will not be able to play VCD/DVD "" Jul 11 17:36:27 arvdr logger: *** DEBUG: Variable DVD has value "" Jul 11 17:36:27 arvdr logger: *** DEBUG: Variable DVDLANG has value "ru" Jul 11 17:36:27 arvdr logger: *** DEBUG: Variable DVDOPTIONS has value "" Jul 11 17:36:27 arvdr logger: *** DEBUG: Variable VCDOPTIONS has value "" Jul 11 17:36:27 arvdr logger: *** DEBUG: Variable MPEG_DIRECT has value "true" Jul 11 17:36:27 arvdr logger: *** DEBUG: Variable SUFFIX has value "1.ts" Jul 11 17:36:27 arvdr logger: *** DEBUG: Variable MPLAYER_V1 has value "true" Jul 11 17:36:27 arvdr logger: *** DEBUG: Calling getvidxy function to analyze source video stream ... Jul 11 17:36:28 arvdr lircd-0.8.3[2455]: accepted new client on /dev/lircd Jul 11 17:36:29 arvdr lircd-0.8.3[2455]: removed client Jul 11 17:36:29 arvdr logger: *** DEBUG: MPLAYER_RETURN: "0" Jul 11 17:36:29 arvdr logger: *** DEBUG: parsed output for ORIG_X: "0" Jul 11 17:36:29 arvdr logger: *** DEBUG: parsed output for ORIG_Y: "0" Jul 11 17:36:29 arvdr logger: *** DEBUG: parsed output for ORIG_FPS: "25.000" Jul 11 17:36:30 arvdr logger: *** DEBUG: parsed output for ORIG_ASPECT: "0.0000" Jul 11 17:36:30 arvdr logger: *** DEBUG: parsed output for VIDEO_FORMAT: "0x10000005" Jul 11 17:36:30 arvdr logger: *** DEBUG: parsed output for AUDIO_CODEC: "mp3" Jul 11 17:36:30 arvdr logger: *** INFO: Source Video has Resolution of 0 x 0 ... Jul 11 17:36:30 arvdr logger: *** FATAL: something went wrong analyzing the video; check your mplayer version ... Jul 11 17:36:30 arvdr vdr: [3904] mplayer: player thread ended (pid=3126) Jul 11 17:36:30 arvdr logger: ao_flush (loop running: 1) Jul 11 17:36:30 arvdr logger: video discontinuity #576, type is 0, disc_off 0 Jul 11 17:36:30 arvdr logger: waiting for audio discontinuity #576 Jul 11 17:36:30 arvdr logger: audio discontinuity #576, type is 0, disc_off 0 Jul 11 17:36:30 arvdr logger: waiting for in_discontinuity update #576 Jul 11 17:36:30 arvdr logger: vpts adjusted with prebuffer to 504741024 Jul 11 17:36:30 arvdr logger: ao_flush (loop running: 1) Jul 11 17:36:30 arvdr logger: audio discontinuity #577, type is 0, disc_off 0 Jul 11 17:36:30 arvdr logger: waiting for in_discontinuity update #577 Jul 11 17:36:30 arvdr logger: video discontinuity #577, type is 0, disc_off 0 Jul 11 17:36:31 arvdr logger: vpts adjusted with prebuffer to 504741058 Jul 11 17:36:31 arvdr logger: load_plugins: plugin vdpau_mpeg12 will be used for video streamtype 00. any ideas ? Goga

1 0

Re: [vdr] Analog TV plugin
by Martin Dauskardt 11 Jul '09

11 Jul '09

> Date: Wed, 08 Jul 2009 14:14:08 +0200 > From: Thomas Netousek <tkn(a)netousek.com> > Subject: Re: [vdr] Analog TV plugin > Hi Martin, > > first of all thanks for your work ! > I am using the HVR1900 which has a DVB-T and an analog part purely for > the capturing from analog. > I am using the pvrusb2 driver from kernel 2.6.29. > This version has two configuration options: > - pvrusb2 sysfs support (EXPERIMENTAL) > - pvrusb2 ATSC/DVB support (EXPERIMENTAL) > > I am disabling the ATSC/DVB support and I get a /dev/video[0,1,2] > instead of /dev/dvb/adapter[0,1,2] I discussed this issue in the pvrusb2 ML: http://www.isely.net/pipermail/pvrusb2/2009-July/002493.html and suggested a possible solution: http://www.isely.net/pipermail/pvrusb2/2009-July/002495.html Would be fine if you could try if this works when "pvrusb2 ATSC/DVB support" is enabled. If you have no other DVB device than the pvrusb2, than I wonder if VDR would accept a not existing - D option. Example: modprobe pbrusb2 adapter_nr=9 vdr -D 0 -Ppvrinput Will vdr fail to start, because the selected dvb adapter is not found? Or will vdr start like there is no DVB device? Note: Maybe you need the dummydevice plugin to get vdr started without any DVB devices. > You are right that I cannot switch easily between DVB-T and analog, but > I do not have that requirement. It should be possible to start a small script via commands.conf, which stops vdr, unloads pvrusb2, reloads it with a different adapter_nr, and restarts vdr with a -D option which allows the usage of the pvrusb2 DVB-T part. This way one could switch between analogue and DVB usage by restarting vdr via OSD. > > So actually I can confirm that pvrinput and pvrusb2 not only work with > one adapter, but with three - and there seems to be no > limit. Do you have three pvrusb2 devices? wow. pvrinput supports a maximum of 8 devices Greets, Martin

1 0

Re: [vdr] [ANNOUNCE] vdr-text2skin-1.2
by Александр 10 Jul '09

10 Jul '09

Question to the author of the plugin text2skin. Thomas, which version of libstdc + + are you using? If I write in the *.skin: <image x="250" y="328" alpha="200" condition="{FrontendHasSignal}" path="images/channel/symbols/hassignal.png"/> or <image x="250" y="328" alpha="200" condition="{FrontendHasLock}" path="images/channel/symbols/haslock.png"/> then vdr closes with an error like: Jul 7 16:37:43 N1 kernel: [ 755.040032] Text2Skin: chan[6841]: segfault at 498c ip b7e8c30e sp ae3f7bf0 error 4 in libstdc ++.so.6.0.10[b7df5000+e3000] or Jul 7 17:42:29 N1 kernel: [ 4641.743552] Text2Skin: chan[8793]: segfault at fc6cc6f0 ip b7dd030e sp acff7bf0 error 5 in libstdc ++.so.6.0.10[b7d39000+e3000]

2 1

Hulu on vdr?
by Timothy D. Lenz 09 Jul '09

09 Jul '09

Anyone able to come up with a plugin or way to use hulu with vdr? Maybe browsing their site from another computer going through vdradmin and then when selecting a show, vdradmin could send the url to vdr through the iptv plugin?

1 0

yaepghd-plugin
by Jouni Karvo 09 Jul '09

09 Jul '09

hi, I am using yaepghd + vdr-xine 9.2. The small window showing the current channel does not scale the video down, but only shows a small fraction of the normal-sized video window. Any idea on how to make the video scale for the window? I run xine with this command: /usr/local/bin/xine -Dtvtime:method=Greedy2Frame,cheap_mode=0,pulldown=0,use_progressive_frame_flag=1 -L -A alsa -a spdif --no-splash -g -f -V xv vdr://tmp/vdr-xine/stream#demux:mpeg_pes --post vdr_video --post vdr_audio yours, Jouni

3 4

Re: [vdr] Analog TV plugin
by Martin Dauskardt 08 Jul '09

08 Jul '09

> Date: Wed, 08 Jul 2009 07:45:05 +0200 > From: Thomas Netousek <tkn(a)netousek.com> > Subject: Re: [vdr] Analog TV plugin > To: VDR Mailing List <vdr(a)linuxtv.org> > Message-ID: <4A543261.5070003(a)netousek.com> > Content-Type: text/plain; charset=ISO-8859-1 > > I suggest you use a card with hardware MPEG encoder and the pvrinput plugin. > This works perfectly with a Happauge HVR1900 USB card. > > Thomas Hi Thomas, I am one of the developers of the pvrinput plugin and made the changes to support the PVRUSB2. This is the first time somebody confirmed that it also works with their successor. As far as I know you cannot use DVB-T and analogue both at the same time (shared hybrid device). I think vdr will always open the DVB device, so the analogue part would be not accessable. How did you solve it? Greets, Martin

2 1

Problem: VDR seems to change the channel after long time viewing via VLC over xineliboutput
by Kai Kronschnabel 08 Jul '09

08 Jul '09

Hy experts, config: Core2Duo, same on Atom 330, 2GB, all new, OnBoard Intel VGA, same with ext. nvidia 8400 or 9600 (this is not the problem) VDR 1.7.8, Technisat Skystart HD2, s2-liplianin, xineliboutput Debian 5 2.6.26-2-686 i686 No local frontend, stream only to VLC 0.9.9 on Windows-Vista problem: After running the VLC client for about 5 to 8 hours the picture freeze and after restart VLC is runs only seconds. If I start vdr from the commandline this happends after the message "now tuned to source ... transponder ..." It seems to me that after some hours VDR forgotts that there is a client that need the channel exclusive. "now tuned to source ... transponder ..." is not seen after the first hours running vdr, except I manually change a channel via SVDRP. I have to restart VDR to get a usable system back for some hours. Am I right here?

2 1

Analog TV plugin
by Rob Davis 08 Jul '09

08 Jul '09

I am trying to see if this still works, however, the only copies I can find are for older versions of VDR. I'm running 1.6 (almost Ubuntu) at the moment, but can't get the version available for download to patch against this. Unfortunetely, where I'm staying only has Cable which broadcasts in analog, otherwise I can get the local channels only (mostly in HD). The usb dongle thing I picked up appears to be able to do NTSC and ATSC. TvTime works with it as does VDR now. I suppose I can do a a whole bunch of mplayer playlists and watch it using those, but I would like to setup the EPG against the channels.

2 1

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

vdr July 2009