vdr August 2009

vdr@linuxtv.org

66 participants
58 discussions

Replay Problems with Extension HD
by Falk Spitzberg 18 Nov '09

18 Nov '09

Hello, Users of the Reel Extension HD card will know that there are Problems when TS recordings are replayed. These Problems seem to be limited to some stations like Pro7 and even with these stations to movies that are broadcastest with DD 5.1 audio. Now my question: What is different between Live TV and Replay. Of course the obvious difference is the data source (file opposed to DVB device). But what else is different? I am wondering, because i watched a movie without problems, while the recording that was done while i watched it live, cannot be replayed. After a few minutes, the hdplayer on the Extension card dies. -- Falk Spitzberg Tel: +49 5242 901626 E-Mail: post(a)spitzberg.de

17 37

[ANNOUNCE] VDR developer version 1.7.8
by Klaus Schmidinger 25 Oct '09

25 Oct '09

VDR developer version 1.7.8 is now available at ftp://ftp.cadsoft.de/vdr/Developer/vdr-1.7.8.tar.bz2 A 'diff' against the previous version is available at ftp://ftp.cadsoft.de/vdr/Developer/vdr-1.7.7-1.7.8.diff WARNING: ======== This is a *developer* version. Even though *I* use it in my productive environment. I strongly recommend that you only use it under controlled conditions and for testing and debugging. IMPORTANT: ========== If you use a full featured DVB card for replay you need the DVB driver version from http://linuxtv.org/hg/v4l-dvb in order to replay TS recordings! Users of full featured DVB cards also need to use a new firmware, available at http://www.escape-edv.de/endriss/firmware The changes since version 1.7.7: - The name of the function cDevice::GetVideoSize() wasn't very well chosen for its purpose of defining the optimum size of the OSD for the current output device. Therefore a new function named cDevice::GetOsdSize() has been introduced (suggested by Rolf Ahrenberg). Plugin authors should implement this function in classes derived from cDevice, if they are able to replay video. cDevice::GetVideoSize() still exists and should return the actual size of the video material that is currently replayed. Note that because of the many possible aspect ratios for video material, the type of the Aspect parameter of GetVideoSize() has been changed to 'double', and the Aspect parameter in both functions is named differently, because it returns different values (suggested by Reinhard Nissl). Thanks to Oliver Endriss for his input on calculating the Aspect factor in GetOsdSize(). - Fixed the way the OSD size is determined on full featured DVB cards (thanks to Oliver Endriss). - Increased MAXOSDHEIGHT to 1200 (suggested by Nicolas Huillard). - Removed limitation to PAL resolution from SPU handling. - Checking fd_video in cDvbDevice::GetVideoSize() to avoid error messages on systems with no real primary replay device (reported by Martin Neuditschko). - Added a note to cTsToPes::GetPes() about having to call it repeatedly, once it has returned a non-NULL value. - Added MPEG 1 handling to remux.c (thanks to Ales Jurik). - Fixed use of time_t in cEIT::cEIT() (thanks to Tobias Bratfisch). - Added missing update of lastOsdSizeUpdate. - EIT events are now only processed if a plausible system time is available, to avoid wrong handling of PDC descriptors (thanks to Tobias Bratfisch). - Removed unused 'synced' member from cTsToPes (reported by Christoph Haubrich). - Added a note to cTsToPes about all TS packets having to belong to the same PID, and that for video data GetPes() may only be called if the next TS packet that will be given to PutTs() has the "payload start" flag set (suggested by Christoph Haubrich). - Added a note about the meaning of PERCENTAGEDELTA in cRingBuffer::UpdatePercentage() (thanks to Rolf Ahrenberg). - The new setup option "Recording/Pause key handling" can be used to define what happens if the Pause key on the remote control is pressed during live tv (thanks to Timo Eskola). - Added a note about cFont::GetFont() not being thread-safe. - Fixed generating PAT/PMT version numbers in case the PIDs change during recording (reported by Reinhard Nissl). - Updated the Ukrainian OSD texts (thanks to Yarema Aka Knedlyk). - Fixed a memory leak when reaching the end of a recording during replay (reported by Reinhard Nissl). - Fixed calling close(-1) in cUnbufferedFile::Close() (reported by Reinhard Nissl). - Added a workaround for the broken linux-dvb driver header files (based on a patch from Tobias Grimm). - Fixed handling the length of DiSEqC command sequences (reported by Reinhard Nissl). - Fixed cOsdMenu::Display() in case the menu size has changed (thanks to Reinhard Nissl). - Added some missing 'const' keywords to avoid compilation errors with gcc 4.4 (thanks to Ville Skyttä and Ludwig Nussel). - Modified cSVDRP::CmdGRAB() to avoid writing into const data (reported by Ludwig Nussel). - Fixed calculating menu colum widths in case the font has a size other than the default size (reported by Reinhard Nissl). - Added a plausibility check for the OSD percentage parameters to avoid problems in case the values are stored in the setup.conf file in a wrong way. - Fixed variable types in cIndexFile (reported by Udo Richter). Have fun! Klaus

4 3

multiple frontends on HVR 4000
by Tarik Chougua 29 Sep '09

29 Sep '09

Hi, i have vdr178 on ubuntu 9.04. with HVR4000 i can see DVB-S and DVB-S2 channels, but not DVB-T channels. How to configure vdr to using multiple frontends of this card pls ? Thank you.

2 1

vdpau patches
by scott 26 Sep '09

26 Sep '09

I was thinking of giving xine/vdpau/xineliboutput another try after failing earlier in the year. I came across these patches: http://www.nfvdr.net/bbs/thread-5856-1-1.html Is anyone using these? -- Scott

5 7

[ANNOUNCE] vdr-iptv-0.3.0
by Rolf Ahrenberg 18 Sep '09

18 Sep '09

Hi, a new version of IPTV plugin is now available and contains an important bug fix that enables correct channel switches between different protocols. http://www.saunalahti.fi/~rahrenbe/vdr/iptv/ 2009-06-01: Version 0.3.0 - Added iptvstream-notrap.sh script. - Fixed setting parameters when protocol changes (Thanks to Peter Holik for reporting this one). - Updated example scripts to use ffmpeg's direct UDP output and added a new "image.sh" script (Thanks to Peter Holik). BR, -- rofa

3 10

Fast compact distro for vdr
by Damien Bally 12 Sep '09

12 Sep '09

Hello Sorry if my mail is out of topic. I'm looking for a linux distro for my vdr box. I'd like a light system (without X11 since I use a dxr3 card) that boots fast. Thanks Damien

7 9

FRC - RGB/Scart with the Intel 830 driver
by dave cunningham 09 Sep '09

09 Sep '09

Question for Thomas I guess... I'm in the process of setting up a PVR and just came across the FRC project which looks very interesting! One query I have though is the re. the restriction on the resolutions available. If I'm reading the patches correctly it seems that the ATI chips can currently do 720x576 only, where the Intel chips can be configured for 1440x576 and 1600x1200 only. The Intel driver has been patched to allow a 12MHz dot clock - is it in fact capable of supporting 720x576 interlaced? If so is there a hardware limitation preventing the FRC syncing working at this resolution? (I ask as I'm planning to use a Mini-ITX Atom board with a GMA950 to be hooked up to a standard-def TV. It would be good if I could use the onboard video and leave the PCI slot free.) Thanks -- Dave Cunningham PGP KEY ID: 0xA78636DC

4 13

text2skin and missing tokens
by Goga777 07 Sep '09

07 Sep '09

Hi how is it possible to implement in text2skin-based skin follow information - which tokens is it possible to use for it ? - transponders parameters - bitrate and resolution - type of system encryption - BER - video format - 16:9 or 4:3 - audio format (AC-3) - what's token {VideoAR} {ReplayVideoAR} ? We would like to implement that feature in new text2skin based skin - AVP http://www.forum.free-x.de/wbb/index.php?page=Thread&postID=4804#post4804 Goga

2 1

Upgrading from 1.4.7 to 1.7.0 : enabling #define
by Pierre-Yves Paranthoen (PERSO) 06 Sep '09

06 Sep '09

Here are the results with the device.c patch you gave me : May 4 15:27:15 localhost vdr: [7031] video directory scanner thread started (pid=7030, tid=7031) May 4 15:27:15 localhost vdr: [7030] reading EPG data from /video/epg.data May 4 15:27:15 localhost vdr: [7032] video directory scanner thread started (pid=7030, tid=7032) May 4 15:27:15 localhost vdr: [7032] video directory scanner thread ended (pid=7030, tid=7032) May 4 15:27:15 localhost vdr: [7030] probing /dev/dvb/adapter0/frontend0 May 4 15:27:15 localhost vdr: [7031] video directory scanner thread ended (pid=7030, tid=7031) May 4 15:27:15 localhost vdr: [7034] CI adapter on device 0 thread started (pid=7030, tid=7034) May 4 15:27:15 localhost vdr: [7030] device 1 provides: DVBS May 4 15:27:15 localhost vdr: [7030] found 1 video device May 4 15:27:15 localhost vdr: [7030] initializing plugin: remote (0.3.9): Remote control May 4 15:27:15 localhost vdr: [7030] setting primary device to 1 May 4 15:27:15 localhost vdr: [7035] tuner on device 1 thread started (pid=7030, tid=7035) May 4 15:27:15 localhost vdr: [7036] section handler thread started (pid=7030, tid=7036) May 4 15:27:15 localhost vdr: [7030] assuming manual start of VDR May 4 15:27:15 localhost vdr: [7030] SVDRP listening on port 2001 May 4 15:27:15 localhost vdr: [7030] setting current skin to "sttng" May 4 15:27:15 localhost vdr: [7030] loading /etc/vdr/themes/sttng-default.theme May 4 15:27:15 localhost vdr: [7030] starting plugin: remote May 4 15:27:15 localhost vdr: [7030] plugin 'remote' called obsolete function RegisterI18n() May 4 15:27:15 localhost vdr: [7030] remote: using '/dev/input/event3' May 4 15:27:15 localhost vdr: [7030] remote-event3: autorepeat supported May 4 15:27:15 localhost vdr: [7030] remote-event3: exclusive access granted May 4 15:27:15 localhost vdr: [7030] remote-event3: keymap loaded '/proc/av7110_ir' flags 001e4000 May 4 15:27:15 localhost vdr: [7030] remote: using 'tcp:3333' May 4 15:27:15 localhost vdr: [7030] remote control remote-event3 - keys known May 4 15:27:15 localhost vdr: [7030] remote control remote-tcp:3333 - keys known May 4 15:27:15 localhost vdr: [7030] remote control KBD - keys known May 4 15:27:15 localhost vdr: [7039] KBD remote control thread started (pid=7030, tid=7039) May 4 15:27:16 localhost vdr: [7034] CAM 2: module present May 4 15:27:17 localhost vdr: [7034] CAM 1: no module present May 4 15:27:17 localhost vdr: [7034] CAM 2: module ready May 4 15:27:28 localhost vdr: [7038] connect from 192.168.3.245, port 51122 - accepted May 4 15:27:45 localhost vdr: [7030] not all devices ready after 30 seconds May 4 15:27:45 localhost vdr: [7030] switching to channel 2 May 4 15:27:45 localhost vdr: [7030] GetDevice 2 0 1 -1 0500 May 4 15:27:45 localhost vdr: [7030] NumCamSlots = 2 May 4 15:27:45 localhost vdr: [7030] CAM 0 not ready May 4 15:27:45 localhost vdr: [7030] CAM 1 ready May 4 15:27:45 localhost vdr: [7030] no usable CAM slots! May 4 15:27:45 localhost vdr: [7030] info: Channel not available! May 4 15:27:45 localhost vdr: [7030] switching to channel 1 May 4 15:27:45 localhost vdr: [7030] GetDevice 1 0 1 -1 0500 May 4 15:27:45 localhost vdr: [7030] NumCamSlots = 2 May 4 15:27:45 localhost vdr: [7030] CAM 0 not ready May 4 15:27:45 localhost vdr: [7030] CAM 1 ready May 4 15:27:45 localhost vdr: [7030] no usable CAM slots! May 4 15:27:45 localhost vdr: [7030] info: Channel not available! May 4 15:27:45 localhost vdr: [7030] timer 1 (46 2255-0000 'STARGATE ATLANTIS') set to event Tue 06.05.2008 23:05-23:50 'STARGATE ATLANTIS' May 4 15:27:45 localhost vdr: [7030] timer 2 (46 2340-0050 'STARGATE ATLANTIS') set to event Tue 06.05.2008 23:50-00:35 'STARGATE ATLANTIS' May 4 15:27:45 localhost vdr: [7030] timer 3 (23 1750-2010 'SERENITY') set to event Sun 04.05.2008 18:00-20:00 'SERENITY' May 4 15:27:53 localhost vdr: [7030] GetDevice 2 0 1 -1 0500 May 4 15:27:53 localhost vdr: [7030] NumCamSlots = 2 May 4 15:27:53 localhost vdr: [7030] CAM 0 not ready May 4 15:27:53 localhost vdr: [7030] CAM 1 ready May 4 15:27:53 localhost vdr: [7030] no usable CAM slots! May 4 15:27:53 localhost vdr: [7030] GetDevice 3 0 1 -1 0500 May 4 15:27:53 localhost vdr: [7030] NumCamSlots = 2 May 4 15:27:53 localhost vdr: [7030] CAM 0 not ready May 4 15:27:53 localhost vdr: [7030] CAM 1 ready May 4 15:27:53 localhost vdr: [7030] no usable CAM slots! May 4 15:27:53 localhost vdr: [7030] GetDevice 4 0 1 -1 0500 May 4 15:27:53 localhost vdr: [7030] NumCamSlots = 2 May 4 15:27:53 localhost vdr: [7030] CAM 0 not ready May 4 15:27:53 localhost vdr: [7030] CAM 1 ready May 4 15:27:53 localhost vdr: [7030] no usable CAM slots! May 4 15:27:53 localhost vdr: [7030] GetDevice 5 0 1 -1 0000 May 4 15:27:53 localhost vdr: [7030] NumCamSlots = 2 May 4 15:27:53 localhost vdr: [7030] j = 0, i = 0, imp = 020C4C6E, Impact = FFFFFFFF May 4 15:27:53 localhost vdr: [7030] device 0 May 4 15:27:53 localhost vdr: [7030] switching to channel 5 May 4 15:27:53 localhost vdr: [7030] GetDevice 5 0 1 -1 0000 May 4 15:27:53 localhost vdr: [7030] NumCamSlots = 2 May 4 15:27:53 localhost vdr: [7030] j = 0, i = 0, imp = 020C4C6E, Impact = FFFFFFFF May 4 15:27:53 localhost vdr: [7030] device 0 May 4 15:27:53 localhost kernel: dvb_frontend_ioctl: DVBFE_GET_INFO May 4 15:27:53 localhost kernel: dvb_frontend_ioctl: FESTATE_RETUNE: fepriv->state=2 May 4 15:27:56 localhost vdr: [7030] switching to channel 2 May 4 15:27:56 localhost vdr: [7030] GetDevice 2 0 1 -1 0500 May 4 15:27:56 localhost vdr: [7030] NumCamSlots = 2 May 4 15:27:56 localhost vdr: [7030] CAM 0 not ready May 4 15:27:56 localhost vdr: [7030] CAM 1 ready May 4 15:27:56 localhost vdr: [7030] no usable CAM slots! May 4 15:27:56 localhost vdr: [7030] info: Channel not available! May 4 15:28:08 localhost vdr: [7030] edited channel 1 TF1;CSAT:11895:vC34O0S0:S19.2E:27500:171:124=fra,125=eng:53:0:8371:1:1074:0 May 4 15:28:11 localhost vdr: [7030] edited channel 2 FRANCE 2;CSAT:12012:vC34O0S0:S19.2E:27500:160:80=fra:32:0:8801:1:1080:0 May 4 15:28:15 localhost vdr: [7030] edited channel 3 FRANCE 3;CSAT:12012:vC34O0S0:S19.2E:27500:161:84=fra:35:0:8802:1:1080:0 May 4 15:28:20 localhost vdr: [7030] edited channel 6 FRANCE 4;CSAT:12168:vC34O0S0:S19.2E:27500:168:112=fra:0:0:9529:1:1088:0 May 4 15:28:26 localhost vdr: [7030] edited channel 8 CANAL+;CSAT:11856:vC34O0S0:S19.2E:27500:160:80=fra,81=eng:32:0:8201:1:1072:0 May 4 15:28:29 localhost vdr: [7030] switching to channel 1 May 4 15:28:29 localhost vdr: [7030] GetDevice 1 0 1 -1 0000 May 4 15:28:29 localhost vdr: [7030] NumCamSlots = 2 May 4 15:28:29 localhost vdr: [7030] j = 0, i = 0, imp = 020C4C6E, Impact = FFFFFFFF May 4 15:28:29 localhost vdr: [7030] device 0 May 4 15:28:30 localhost kernel: dvb_frontend_ioctl: DVBFE_GET_INFO May 4 15:28:30 localhost kernel: dvb_frontend_ioctl: FESTATE_RETUNE: fepriv->state=2 May 4 15:28:32 localhost vdr: [7036] changing caids of channel 1 from 0 to 500,100 May 4 15:28:32 localhost vdr: [7030] retuning due to modification of channel 1 May 4 15:28:32 localhost vdr: [7030] switching to channel 1 May 4 15:28:32 localhost vdr: [7030] GetDevice 1 0 1 -1 0500 May 4 15:28:32 localhost vdr: [7030] NumCamSlots = 2 May 4 15:28:32 localhost vdr: [7030] CAM 0 not ready May 4 15:28:32 localhost vdr: [7030] CAM 1 ready May 4 15:28:32 localhost vdr: [7030] no usable CAM slots! May 4 15:28:32 localhost vdr: [7030] info: Channel not available! May 4 15:28:40 localhost vdr: [7030] GetDevice 2 0 1 -1 0000 May 4 15:28:40 localhost vdr: [7030] NumCamSlots = 2 May 4 15:28:40 localhost vdr: [7030] j = 0, i = 0, imp = 020C4C6E, Impact = FFFFFFFF May 4 15:28:40 localhost vdr: [7030] device 0 May 4 15:28:40 localhost vdr: [7030] switching to channel 2 May 4 15:28:40 localhost vdr: [7030] GetDevice 2 0 1 -1 0000 May 4 15:28:40 localhost vdr: [7030] NumCamSlots = 2 May 4 15:28:40 localhost vdr: [7030] j = 0, i = 0, imp = 020C4C6E, Impact = FFFFFFFF May 4 15:28:40 localhost vdr: [7030] device 0 May 4 15:28:41 localhost kernel: dvb_frontend_ioctl: DVBFE_GET_INFO May 4 15:28:41 localhost kernel: dvb_frontend_ioctl: FESTATE_RETUNE: fepriv->state=2 May 4 15:28:41 localhost vdr: [7036] changing caids of channel 2 from 0 to 500,100 May 4 15:28:41 localhost vdr: [7030] retuning due to modification of channel 2 May 4 15:28:41 localhost vdr: [7030] switching to channel 2 May 4 15:28:41 localhost vdr: [7030] GetDevice 2 0 1 -1 0500 May 4 15:28:41 localhost vdr: [7030] NumCamSlots = 2 May 4 15:28:41 localhost vdr: [7030] CAM 0 not ready May 4 15:28:41 localhost vdr: [7030] CAM 1 ready May 4 15:28:41 localhost vdr: [7030] no usable CAM slots! May 4 15:28:41 localhost vdr: [7030] info: Channel not available! May 4 15:28:44 localhost vdr: [7036] changing caids of channel 3 from 0 to 500,100 May 4 15:28:48 localhost vdr: [7030] GetDevice 3 0 1 -1 0500 May 4 15:28:48 localhost vdr: [7030] NumCamSlots = 2 May 4 15:28:48 localhost vdr: [7030] CAM 0 not ready May 4 15:28:48 localhost vdr: [7030] CAM 1 ready May 4 15:28:48 localhost vdr: [7030] no usable CAM slots! May 4 15:28:48 localhost vdr: [7030] GetDevice 4 0 1 -1 0500 May 4 15:28:48 localhost vdr: [7030] NumCamSlots = 2 May 4 15:28:48 localhost vdr: [7030] CAM 0 not ready May 4 15:28:48 localhost vdr: [7030] CAM 1 ready May 4 15:28:48 localhost vdr: [7030] no usable CAM slots! May 4 15:28:48 localhost vdr: [7030] GetDevice 5 0 1 -1 0000 May 4 15:28:48 localhost vdr: [7030] NumCamSlots = 2 May 4 15:28:48 localhost vdr: [7030] j = 0, i = 0, imp = 020C4C6E, Impact = FFFFFFFF May 4 15:28:48 localhost vdr: [7030] device 0 May 4 15:28:48 localhost vdr: [7030] switching to channel 5 May 4 15:28:48 localhost vdr: [7030] GetDevice 5 0 1 -1 0000 May 4 15:28:48 localhost vdr: [7030] NumCamSlots = 2 May 4 15:28:48 localhost vdr: [7030] j = 0, i = 0, imp = 020C4C6E, Impact = FFFFFFFF May 4 15:28:48 localhost vdr: [7030] device 0 May 4 15:28:48 localhost kernel: dvb_frontend_ioctl: DVBFE_GET_INFO May 4 15:28:48 localhost kernel: dvb_frontend_ioctl: FESTATE_RETUNE: fepriv->state=2 May 4 15:28:54 localhost vdr: [7030] GetDevice 6 0 1 -1 0000 May 4 15:28:54 localhost vdr: [7030] NumCamSlots = 2 May 4 15:28:54 localhost vdr: [7030] j = 0, i = 0, imp = 020C4C6E, Impact = FFFFFFFF May 4 15:28:54 localhost vdr: [7030] device 0 May 4 15:28:54 localhost vdr: [7030] switching to channel 6 May 4 15:28:54 localhost vdr: [7030] GetDevice 6 0 1 -1 0000 May 4 15:28:54 localhost vdr: [7030] NumCamSlots = 2 May 4 15:28:54 localhost vdr: [7030] j = 0, i = 0, imp = 020C4C6E, Impact = FFFFFFFF May 4 15:28:54 localhost vdr: [7030] device 0 May 4 15:28:54 localhost kernel: dvb_frontend_ioctl: DVBFE_GET_INFO May 4 15:28:54 localhost kernel: dvb_frontend_ioctl: FESTATE_RETUNE: fepriv->state=2 May 4 15:28:56 localhost vdr: [7036] changing caids of channel 6 from 0 to 500,100 May 4 15:28:56 localhost vdr: [7030] retuning due to modification of channel 6 May 4 15:28:56 localhost vdr: [7030] switching to channel 6 May 4 15:28:56 localhost vdr: [7030] GetDevice 6 0 1 -1 0500 May 4 15:28:56 localhost vdr: [7030] NumCamSlots = 2 May 4 15:28:56 localhost vdr: [7030] CAM 0 not ready May 4 15:28:56 localhost vdr: [7030] CAM 1 ready May 4 15:28:56 localhost vdr: [7030] no usable CAM slots! May 4 15:28:56 localhost vdr: [7030] info: Channel not available! May 4 15:28:59 localhost vdr: [7030] GetDevice 7 0 1 -1 0500 May 4 15:28:59 localhost vdr: [7030] NumCamSlots = 2 May 4 15:28:59 localhost vdr: [7030] CAM 0 not ready May 4 15:28:59 localhost vdr: [7030] CAM 1 ready May 4 15:28:59 localhost vdr: [7030] no usable CAM slots! May 4 15:28:59 localhost vdr: [7030] GetDevice 8 0 1 -1 0000 May 4 15:28:59 localhost vdr: [7030] NumCamSlots = 2 May 4 15:28:59 localhost vdr: [7030] j = 0, i = 0, imp = 020C4C6E, Impact = FFFFFFFF May 4 15:28:59 localhost vdr: [7030] device 0 May 4 15:28:59 localhost vdr: [7030] switching to channel 8 May 4 15:28:59 localhost vdr: [7030] GetDevice 8 0 1 -1 0000 May 4 15:28:59 localhost vdr: [7030] NumCamSlots = 2 May 4 15:28:59 localhost vdr: [7030] j = 0, i = 0, imp = 020C4C6E, Impact = FFFFFFFF May 4 15:28:59 localhost vdr: [7030] device 0 May 4 15:28:59 localhost kernel: dvb_frontend_ioctl: DVBFE_GET_INFO May 4 15:28:59 localhost kernel: dvb_frontend_ioctl: FESTATE_RETUNE: fepriv->state=2 May 4 15:29:00 localhost vdr: [7036] changing caids of channel 8 from 0 to 500,100 May 4 15:29:01 localhost vdr: [7030] retuning due to modification of channel 8 May 4 15:29:01 localhost vdr: [7030] switching to channel 8 May 4 15:29:01 localhost vdr: [7030] GetDevice 8 0 1 -1 0500 May 4 15:29:01 localhost vdr: [7030] NumCamSlots = 2 May 4 15:29:01 localhost vdr: [7030] CAM 0 not ready May 4 15:29:01 localhost vdr: [7030] CAM 1 ready May 4 15:29:01 localhost vdr: [7030] no usable CAM slots! May 4 15:29:01 localhost vdr: [7030] info: Channel not available! May 4 15:29:01 localhost vdr: [7036] channel 23 (C CINEMA PREMIER) event Sun 04.05.2008 15:15-16:50 'SENTIMENTS PARTAGES' status 4 May 4 15:29:38 localhost vdr: [7030] GetDevice 9 0 1 -1 0500 May 4 15:29:38 localhost vdr: [7030] NumCamSlots = 2 May 4 15:29:38 localhost vdr: [7030] CAM 0 not ready May 4 15:29:38 localhost vdr: [7030] CAM 1 ready May 4 15:29:38 localhost vdr: [7030] no usable CAM slots! May 4 15:29:38 localhost vdr: [7030] GetDevice 10 0 1 -1 0500 May 4 15:29:38 localhost vdr: [7030] NumCamSlots = 2 May 4 15:29:38 localhost vdr: [7030] CAM 0 not ready May 4 15:29:38 localhost vdr: [7030] CAM 1 ready May 4 15:29:38 localhost vdr: [7030] no usable CAM slots! May 4 15:29:38 localhost vdr: [7030] GetDevice 11 0 1 -1 0D03 May 4 15:29:38 localhost vdr: [7030] NumCamSlots = 2 May 4 15:29:38 localhost vdr: [7030] CAM 0 not ready May 4 15:29:38 localhost vdr: [7030] CAM 1 ready May 4 15:29:38 localhost vdr: [7030] no usable CAM slots! May 4 15:29:38 localhost vdr: [7030] GetDevice 12 0 1 -1 0500 May 4 15:29:38 localhost vdr: [7030] NumCamSlots = 2 May 4 15:29:38 localhost vdr: [7030] CAM 0 not ready May 4 15:29:38 localhost vdr: [7030] CAM 1 ready May 4 15:29:38 localhost vdr: [7030] no usable CAM slots! May 4 15:29:38 localhost vdr: [7030] GetDevice 13 0 1 -1 0500 May 4 15:29:38 localhost vdr: [7030] NumCamSlots = 2 May 4 15:29:38 localhost vdr: [7030] CAM 0 not ready May 4 15:29:38 localhost vdr: [7030] CAM 1 ready May 4 15:29:38 localhost vdr: [7030] no usable CAM slots! May 4 15:29:38 localhost vdr: [7030] GetDevice 14 0 1 -1 0500 May 4 15:29:38 localhost vdr: [7030] NumCamSlots = 2 May 4 15:29:38 localhost vdr: [7030] CAM 0 not ready May 4 15:29:38 localhost vdr: [7030] CAM 1 ready May 4 15:29:38 localhost vdr: [7030] no usable CAM slots! May 4 15:29:38 localhost vdr: [7030] GetDevice 15 0 1 -1 0500 May 4 15:29:38 localhost vdr: [7030] NumCamSlots = 2 May 4 15:29:38 localhost vdr: [7030] CAM 0 not ready May 4 15:29:38 localhost vdr: [7030] CAM 1 ready May 4 15:29:38 localhost vdr: [7030] no usable CAM slots! May 4 15:29:38 localhost vdr: [7030] GetDevice 16 0 1 -1 0500 May 4 15:29:38 localhost vdr: [7030] NumCamSlots = 2 May 4 15:29:38 localhost vdr: [7030] CAM 0 not ready May 4 15:29:38 localhost vdr: [7030] CAM 1 ready May 4 15:29:38 localhost vdr: [7030] no usable CAM slots! May 4 15:29:38 localhost vdr: [7030] GetDevice 17 0 1 -1 0500 May 4 15:29:38 localhost vdr: [7030] NumCamSlots = 2 May 4 15:29:38 localhost vdr: [7030] CAM 0 not ready May 4 15:29:38 localhost vdr: [7030] CAM 1 ready May 4 15:29:38 localhost vdr: [7030] no usable CAM slots! May 4 15:29:38 localhost vdr: [7030] GetDevice 18 0 1 -1 0000 May 4 15:29:38 localhost vdr: [7030] NumCamSlots = 2 May 4 15:29:38 localhost vdr: [7030] j = 0, i = 0, imp = 020C4C6E, Impact = FFFFFFFF May 4 15:29:38 localhost vdr: [7030] device 0 May 4 15:29:38 localhost vdr: [7030] switching to channel 18 May 4 15:29:38 localhost vdr: [7030] GetDevice 18 0 1 -1 0000 May 4 15:29:38 localhost vdr: [7030] NumCamSlots = 2 May 4 15:29:38 localhost vdr: [7030] j = 0, i = 0, imp = 020C4C6E, Impact = FFFFFFFF May 4 15:29:38 localhost vdr: [7030] device 0 May 4 15:29:38 localhost kernel: dvb_frontend_ioctl: DVBFE_GET_INFO May 4 15:29:38 localhost kernel: dvb_frontend_ioctl: FESTATE_RETUNE: fepriv->state=2 May 4 15:29:42 localhost vdr: [7030] switching to channel 20 May 4 15:29:42 localhost vdr: [7030] GetDevice 20 0 1 -1 0500 May 4 15:29:42 localhost vdr: [7030] NumCamSlots = 2 May 4 15:29:42 localhost vdr: [7030] CAM 0 not ready May 4 15:29:42 localhost vdr: [7030] CAM 1 ready May 4 15:29:42 localhost vdr: [7030] no usable CAM slots! May 4 15:29:42 localhost vdr: [7030] info: Channel not available! May 4 15:29:48 localhost vdr: [7030] switching to channel 1 May 4 15:29:48 localhost vdr: [7030] GetDevice 1 0 1 -1 0500 May 4 15:29:48 localhost vdr: [7030] NumCamSlots = 2 May 4 15:29:48 localhost vdr: [7030] CAM 0 not ready May 4 15:29:48 localhost vdr: [7030] CAM 1 ready May 4 15:29:48 localhost vdr: [7030] no usable CAM slots! May 4 15:29:48 localhost vdr: [7030] info: Channel not available! Pierre

3 5

[ANNOUNCE] vdr-femon-1.7.3
by Rolf Ahrenberg 04 Sep '09

04 Sep '09

Hi, a new femon plugin release is now available for latest development vdr versions: http://www.saunalahti.fi/~rahrenbe/vdr/femon/ 2009-08-29: Version 1.7.3 - Removed OSD offset and height options. - Added PES assembler. - Added bitstream parsers for all codecs. There has been a major rewrite since the previous release, so I might have broken the AAC/AC3/H.264 bitstream parsers as I don't have such streams available and couldn't find any beta testers either. Please, report any regressions by email/IRC. BR, -- rofa

2 2

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

vdr August 2009