Klaus Schmidinger wrote:
Anssi Hannula wrote:
On 5/27/06, Klaus Schmidinger Klaus.Schmidinger@cadsoft.de wrote:
Klaus Schmidinger wrote:
Anssi Hannula wrote:
... Okay, attached is a patch for nit.c that checks for all the
frequencies
in frequency_list_descriptor for the channel's frequency and if
found,
use it so that channel's frequency is not changed.
Also in the detection of new transponders all frequencies are
added for
the EITscanner.
I tested it by removing a transponder from channels.conf, and VDR
found
it again (though it took a while, as there are *many* frequencies
in the
frequency_list_descriptor). This too hasn't been working before on
the
DVB-T network of Finland. ...
Please test whether the attached version of the patch still works. Since none of the satellites I can receive uses the FrequencyListDescriptor, and I don't have cable or terrestrial signals, I can't test it myself.
If it's ok like this for you, I would include it in tomorrow's maintenance patch.
Attached is a new version.
It works fine :)