Hello,
On my vdr-box, I cannot watch some channels. For example when switching to France 2, the image stutters and then freezes after some seconds. And the audio output stops too.
I have 2 outputs with some messages:
1.) From stdout/stderr (only some samples, because there are a lot of lines):
ffmpeg_audio_dec: not enough data to decode metronom: video jump by -23415 pts. metronom: video jump by 72000 pts. video_out_vdpau: b 0 c 128 s 128 h 0 [ITU-R 709 / HDTV] ffmpeg_audio_dec: not enough data to decode video_out: throwing away image with pts 24396186 because it's too old (diff : 124178). ffmpeg_audio_dec: not enough data to decode metronom: video jump by -48960 pts. video_out: throwing away image with pts 24358421 because it's too old (diff : 286741). ffmpeg_audio_dec: not enough data to decode audio_out: flushed out 0 buffers. ffmpeg_audio_dec: resetting parser audio_out: ao_flush (loop running: 1) set_speed 0. video_out: new speed 0. set_speed 1000000. video_out: new speed 1000000. audio_out: new speed 1000000. audio_out: flushed out 0 buffers. audio_out: flushed out 0 buffers. ffmpeg_audio_dec: resetting parser audio_out: ao_flush (loop running: 1) metronom: prebuffer=14400 pts. metronom: video discontinuity #78, type is 3, disc_off 0. metronom: waiting for audio discontinuity #78... ffmpeg_audio_dec: resetting parser metronom: audio discontinuity #78, type is 3, disc_off 0. metronom: vpts adjusted with prebuffer to 24818015. metronom: prebuffer=2000 pts. metronom: prebuffer=14400 pts. video_out_vdpau: b 0 c 128 s 128 h 0 [ITU-R 470 BG / SDTV] metronom: prebuffer=14400 pts. set_speed 0.
2.) From syslog:
vdr[2239]: [2252] [vdr-fe] Keypress: XKeySym Next vdr[2239]: [2239] [xine..put] cXinelibOsd::CanHandleAreas(): Device does not support ARGB vdr[2239]: [2239] switching to channel 39 T-8442-1-257 (France 2) vdr[2239]: [2735] device 1 TS buffer thread ended (pid=2239, tid=2735) vdr[2239]: [2734] buffer stats: 91932 (1%) used vdr[2239]: [2734] device 1 receiver thread ended (pid=2239, tid=2734) vdr[2239]: [2788] device 1 receiver thread started (pid=2239, tid=2788, prio=high) vdr[2239]: [2789] device 1 TS buffer thread started (pid=2239, tid=2789, prio=high) vdr[2239]: [2262] [demux_vdr] PMT changed, resetting demuxer vdr[2239]: [2788] [xine..put] H.264: Found NAL SPS at offset 6/156 vdr[2239]: [2788] [xine..put] H.264 SPS: profile_idc 100 vdr[2239]: [2788] [xine..put] H.264 SPS: pic_width: 120 mbs vdr[2239]: [2788] [xine..put] H.264 SPS: pic_height: 34 mbs vdr[2239]: [2788] [xine..put] H.264 SPS: frame only flag: 0 vdr[2239]: [2788] [xine..put] H.264 SPS: MBAFF vdr[2239]: [2788] [xine..put] H.264 SPS: cropping 0 0 0 2 vdr[2239]: [2788] [xine..put] H.264 SPS: aspect_ratio_idc 1 vdr[2239]: [2788] [xine..put] H.264 SPS: -> aspect ratio 1 / 1 vdr[2239]: [2788] [xine..put] H.264 SPS: -> video size 1920x1080, aspect 1:1 vdr[2239]: [2788] [xine..put] Detected video size 1920x1080 vdr[2239]: [2262] [demux_vdr] audio stream changed: 00000000 -> 03410000 vdr[2239]: [2788] ERROR: 1 TS packet(s) not accepted in Transfer Mode vdr[2239]: [2788] [xine..put] H.264: Found NAL SPS at offset 6/156 vdr[2239]: [2788] [xine..put] H.264 SPS: profile_idc 100 vdr[2239]: [2788] [xine..put] H.264 SPS: pic_width: 120 mbs vdr[2239]: [2788] [xine..put] H.264 SPS: pic_height: 34 mbs vdr[2239]: [2788] [xine..put] H.264 SPS: frame only flag: 0 vdr[2239]: [2788] [xine..put] H.264 SPS: MBAFF vdr[2239]: [2788] [xine..put] H.264 SPS: cropping 0 0 0 2 vdr[2239]: [2788] [xine..put] H.264 SPS: aspect_ratio_idc 1 vdr[2239]: [2788] [xine..put] H.264 SPS: -> aspect ratio 1 / 1 vdr[2239]: [2788] [xine..put] H.264 SPS: -> video size 1920x1080, aspect 1:1 vdr[2239]: [2788] [xine..put] Detected video size 1920x1080
What could I do please, do watch such channels?
Thanks in advance for any hints. Kind regards,