Hi all,
I cannot compile a patched lib-xine using the most recent version available in gentoos portage tree. libxine compiles fine without the patch from R. Nissl. there is something about "@XINE_PLUGIN_MIN_SYMS@" but I don't know what that means. I tried to remove this tag in the Makefile, but then there is some other errors.. Does anyone know how to solve this?
Here is the compile log:
Making all in vdr make[3]: Entering directory `/var/tmp/portage/xine-lib-1.1.2_pre20060328-r7/work/xine-lib-1.1.2cvs/src/vdr' /bin/sh ../../libtool-nofpic --mode=compile i686-pc-linux-gnu-gcc -DHAVE_CONFIG_H -I. -I. -I../.. -I../.. -I../../include -I../../include -I../../src -I../../src/xine-engine -I../../src/xine-engine -I../../src/xine-utils -I../../src/input -I../../src/input -I../../lib -D_LARGEFILE64_SOURCE -DNDEBUG -D_REENTRANT -D_FILE_OFFSET_BITS=64 -DXINE_COMPILE -DENABLE_IPV6 -march=pentium4 -O2 -pipe -frename-registers -ffunction-sections -c -o input_vdr.lo `test -f 'input_vdr.c' || echo './'`input_vdr.c mkdir .libs
i686-pc-linux-gnu-gcc -DHAVE_CONFIG_H -I. -I. -I../.. -I../.. -I../../include -I../../include -I../../src -I../../src/xine-engine -I../../src/xine-engine -I../../src/xine-utils -I../../src/input -I../../src/input -I../../lib -D_LARGEFILE64_SOURCE -DNDEBUG -D_REENTRANT -D_FILE_OFFSET_BITS=64 -DXINE_COMPILE -DENABLE_IPV6 -march=pentium4 -O2 -pipe -frename-registers -ffunction-sections -c input_vdr.c -fPIC -DPIC -o .libs/input_vdr.o /bin/sh ../../libtool-nofpic --mode=link i686-pc-linux-gnu-gcc -D_LARGEFILE64_SOURCE -DNDEBUG -D_REENTRANT -D_FILE_OFFSET_BITS=64 -DXINE_COMPILE -DENABLE_IPV6 -march=pentium4 -O2 -pipe -frename-registers -ffunction-sections -o xineplug_inp_vdr.la -rpath /usr/lib/xine/plugins/1.1.2 -avoid-version -module @XINE_PLUGIN_MIN_SYMS@ input_vdr.lo ../../src/xine-engine/libxine.la libtool-nofpic: link: warning: `/usr/lib/gcc/i686-pc-linux-gnu/3.4.4/../../..//libfreetype.la' seems to be moved i686-pc-linux-gnu-gcc -shared .libs/input_vdr.o -Wl,--rpath -Wl,/var/tmp/portage/xine-lib-1.1.2_pre20060328-r7/work/xine-lib-1.1.2cvs/src/xine-engine/.libs ../../src/xine-engine/.libs/libxine.so -L/usr/lib/gcc/i686-pc-linux-gnu/3.4.4/../../../ -march=pentium4 @XINE_PLUGIN_MIN_SYMS@ -Wl,-soname -Wl,xineplug_inp_vdr.so -o .libs/xineplug_inp_vdr.so
i686-pc-linux-gnu-gcc: @XINE_PLUGIN_MIN_SYMS@: No such file or directory
Thank you!
greetings Thomas Glomann
Hi Thomas, I´m trying to do something similar. In my case is a bit more complex as I'm trying under a PPC architecture. It's a Gentoo Linux/ PPC mac setup. I've been able to compile vdr, xine-ui, xine-lib and vdr- streamdev-client ebuilds (the last one I made my own overlay). I've used the USE=vdr for the xine-ui.
However, I´ve NOT found the vdr-xine ebuild, so I doubt that my xine (ui and lib) got any vdr patch.
Have you done something different to be able to apply the vdr-xine patch? do you know where I can get a vdr-xine ebuild?
thanks, luis
El 31/05/2006, a las 18:17, Thomas Glomann escribió:
Hi all,
I cannot compile a patched lib-xine using the most recent version available in gentoos portage tree. libxine compiles fine without the patch from R. Nissl. there is something about "@XINE_PLUGIN_MIN_SYMS@" but I don't know what that means. I tried to remove this tag in the Makefile, but then there is some other errors.. Does anyone know how to solve this?
Here is the compile log:
Making all in vdr make[3]: Entering directory `/var/tmp/portage/xine-lib-1.1.2_pre20060328-r7/work/xine- lib-1.1.2cvs/src/vdr' /bin/sh ../../libtool-nofpic --mode=compile i686-pc-linux-gnu-gcc -DHAVE_CONFIG_H -I. -I. -I../.. -I../.. - I../../include -I../../include -I../../src -I../../src/xine-engine - I../../src/xine-engine -I../../src/xine-utils -I../../src/input - I../../src/input -I../../lib -D_LARGEFILE64_SOURCE -DNDEBUG - D_REENTRANT -D_FILE_OFFSET_BITS=64 -DXINE_COMPILE -DENABLE_IPV6 - march=pentium4 -O2 -pipe -frename-registers -ffunction-sections -c -o input_vdr.lo `test -f 'input_vdr.c' || echo './'`input_vdr.c mkdir .libs
i686-pc-linux-gnu-gcc -DHAVE_CONFIG_H -I. -I. -I../.. -I../.. - I../../include -I../../include -I../../src -I../../src/xine-engine - I../../src/xine-engine -I../../src/xine-utils -I../../src/input - I../../src/input -I../../lib -D_LARGEFILE64_SOURCE -DNDEBUG - D_REENTRANT -D_FILE_OFFSET_BITS=64 -DXINE_COMPILE -DENABLE_IPV6 - march=pentium4 -O2 -pipe -frename-registers -ffunction-sections -c input_vdr.c -fPIC -DPIC -o .libs/input_vdr.o /bin/sh ../../libtool-nofpic --mode=link i686-pc-linux-gnu-gcc -D_LARGEFILE64_SOURCE -DNDEBUG -D_REENTRANT - D_FILE_OFFSET_BITS=64 -DXINE_COMPILE -DENABLE_IPV6 -march=pentium4 -O2 -pipe -frename-registers -ffunction-sections -o xineplug_inp_vdr.la -rpath /usr/lib/xine/plugins/1.1.2 -avoid- version -module @XINE_PLUGIN_MIN_SYMS@ input_vdr.lo ../../src/xine-engine/libxine.la libtool-nofpic: link: warning: `/usr/lib/gcc/i686-pc-linux-gnu/3.4.4/../../..//libfreetype.la' seems to be moved i686-pc-linux-gnu-gcc -shared .libs/input_vdr.o -Wl,--rpath -Wl,/ var/tmp/portage/xine-lib-1.1.2_pre20060328-r7/work/xine- lib-1.1.2cvs/src/xine-engine/.libs ../../src/xine-engine/.libs/ libxine.so -L/usr/lib/gcc/i686-pc-linux-gnu/3.4.4/../../../ - march=pentium4 @XINE_PLUGIN_MIN_SYMS@ -Wl,-soname -Wl,xineplug_inp_vdr.so -o .libs/ xineplug_inp_vdr.so
i686-pc-linux-gnu-gcc: @XINE_PLUGIN_MIN_SYMS@: No such file or directory
Thank you!
greetings Thomas Glomann
vdr mailing list vdr@linuxtv.org http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr
On Thursday 01 June 2006 19:36, Luis Palacios wrote:
Hi Thomas, I´m trying to do something similar. In my case is a bit more complex as I'm trying under a PPC architecture. It's a Gentoo Linux/ PPC mac setup. I've been able to compile vdr, xine-ui, xine-lib and vdr- streamdev-client ebuilds (the last one I made my own overlay). I've used the USE=vdr for the xine-ui.
However, I´ve NOT found the vdr-xine ebuild, so I doubt that my xine (ui and lib) got any vdr patch.
Have you done something different to be able to apply the vdr-xine patch? do you know where I can get a vdr-xine ebuild?
thanks, luis
Hi Luis,
Ok, I didn't use an ebuild for vdr-xine (which is just a patched xine-lib). Unfortunately, the xine-lib in portage does not include this patch. So I made a little hack : I extracted the xine-lib sources (in /usr/portage/distfiles), applied the patch (the one form the the vdr-xine plugin), repacked the sources and then moved it back to portage/distfiles. Then you have to modify the digest files in your portage tree of course. This can easily done with "ebuild ....xine-lib-....ebuild digest". After that you can simply emerge xine-lib and the already patched sources get compiled as usual, except for the compile error I posted to the last yesterday. Maybe you have better luck :)
greetings, Thomas
On Wednesday 31 May 2006 18:17, Thomas Glomann wrote:
Hi all,
I cannot compile a patched lib-xine using the most recent version available in gentoos portage tree. libxine compiles fine without the patch from R. Nissl. there is something about "@XINE_PLUGIN_MIN_SYMS@" but I don't know what that means. I tried to remove this tag in the Makefile, but then there is some other errors.. Does anyone know how to solve this?
Here is the compile log:
Making all in vdr make[3]: Entering directory `/var/tmp/portage/xine-lib-1.1.2_pre20060328-r7/work/xine-lib-1.1.2cvs/src/ vdr' /bin/sh ../../libtool-nofpic --mode=compile i686-pc-linux-gnu-gcc -DHAVE_CONFIG_H -I. -I. -I../.. -I../.. -I../../include -I../../include -I../../src -I../../src/xine-engine -I../../src/xine-engine -I../../src/xine-utils -I../../src/input -I../../src/input -I../../lib -D_LARGEFILE64_SOURCE -DNDEBUG -D_REENTRANT -D_FILE_OFFSET_BITS=64 -DXINE_COMPILE -DENABLE_IPV6 -march=pentium4 -O2 -pipe -frename-registers -ffunction-sections -c -o input_vdr.lo `test -f 'input_vdr.c' || echo './'`input_vdr.c mkdir .libs
i686-pc-linux-gnu-gcc -DHAVE_CONFIG_H -I. -I. -I../.. -I../.. -I../../include -I../../include -I../../src -I../../src/xine-engine -I../../src/xine-engine -I../../src/xine-utils -I../../src/input -I../../src/input -I../../lib -D_LARGEFILE64_SOURCE -DNDEBUG -D_REENTRANT -D_FILE_OFFSET_BITS=64 -DXINE_COMPILE -DENABLE_IPV6 -march=pentium4 -O2 -pipe -frename-registers -ffunction-sections -c input_vdr.c -fPIC -DPIC -o .libs/input_vdr.o /bin/sh ../../libtool-nofpic --mode=link i686-pc-linux-gnu-gcc -D_LARGEFILE64_SOURCE -DNDEBUG -D_REENTRANT -D_FILE_OFFSET_BITS=64 -DXINE_COMPILE -DENABLE_IPV6 -march=pentium4 -O2 -pipe -frename-registers -ffunction-sections -o xineplug_inp_vdr.la -rpath /usr/lib/xine/plugins/1.1.2 -avoid-version -module @XINE_PLUGIN_MIN_SYMS@ input_vdr.lo ../../src/xine-engine/libxine.la libtool-nofpic: link: warning: `/usr/lib/gcc/i686-pc-linux-gnu/3.4.4/../../..//libfreetype.la' seems to be moved i686-pc-linux-gnu-gcc -shared .libs/input_vdr.o -Wl,--rpath -Wl,/var/tmp/portage/xine-lib-1.1.2_pre20060328-r7/work/xine-lib-1.1.2cvs/s rc/xine-engine/.libs ../../src/xine-engine/.libs/libxine.so -L/usr/lib/gcc/i686-pc-linux-gnu/3.4.4/../../../ -march=pentium4 @XINE_PLUGIN_MIN_SYMS@ -Wl,-soname -Wl,xineplug_inp_vdr.so -o .libs/xineplug_inp_vdr.so
i686-pc-linux-gnu-gcc: @XINE_PLUGIN_MIN_SYMS@: No such file or directory
Thank you!
greetings Thomas Glomann
vdr mailing listr vdr@linuxtv.org http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr
It seems that patch number 237 in the gentoo ebuild for xine-lib messes around with the " @XINE_PLUGIN_MIN_SYMS@" tag. it seems to remove all these ones from all Makefile.ams. I let portage skip this patch (once again via patching the respective sources and rebuilding the digest file). Now it is compiling fine :) Hope this little HOWTO helps all other Gentoo users out there :)
greetings Thomas Glomann
-
Luis Palacios -
Thomas Glomann