I am currently having problems with either cabling or the Diseq switch attached to tuner 0 on my TT S2 6400, so as a workaround, I thought I could use the "- D 1" switch to vdr, to force using tuner 1 only.
When I do this, it seems vdr does not see the card as full featured any more - no MPEG decoder and no OSD:
May 28 18:00:16 atom kernel: [ 8.267126] SAA716x FF FPGA version 1.09 May 28 18:00:16 atom kernel: [ 8.322299] SAA716x FF loader version 1.03 May 28 18:00:16 atom kernel: [ 8.430376] Adding 511996k swap on /dev/sda2. Priority:0 extents:1 across:511996k May 28 18:00:16 atom kernel: [ 9.008765] DVB: registering new adapter (SAA716x dvb adapter) May 28 18:00:16 atom kernel: [ 9.122724] stv6110x_attach: Attaching STV6110x May 28 18:00:16 atom kernel: [ 9.131550] SAA716x FF 0000:04:00.0: DVB: registering adapter 0 frontend 0 (STV090x Multistandard)... May 28 18:00:16 atom kernel: [ 9.132215] DVB: registering new adapter (SAA716x dvb adapter) May 28 18:00:16 atom kernel: [ 9.133222] stv6110x_attach: Attaching STV6110x May 28 18:00:16 atom kernel: [ 9.166794] SAA716x FF 0000:04:00.0: DVB: registering adapter 1 frontend 0 (STV090x Multistandard)... May 28 18:00:16 atom kernel: [ 9.183091] EXT4-fs (sda1): mounting ext3 file system using the ext4 subsystem May 28 18:00:16 atom kernel: [ 9.191439] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null) May 28 18:00:16 atom kernel: [ 9.206251] XFS (sda4): Mounting Filesystem May 28 18:00:16 atom kernel: [ 9.401740] XFS (sda4): Ending clean mount May 28 18:00:16 atom kernel: [ 9.962394] SAA716x FF firmware version 0.3.9 May 28 18:00:16 atom kernel: [ 9.962510] input: TT6400 DVB IR receiver as /devices/pci0000:00/0000:00:1c.0/0000:04:00.0/input/input2 May 28 18:00:16 atom kernel: [ 10.880902] lirc_dev: IR Remote Control driver registered, major 250 May 28 18:00:16 atom network[588]: Bringing up loopback interface: [ OK ] May 28 18:00:16 atom kernel: [ 11.599562] r8169 0000:03:00.0: em1: link down May 28 18:00:16 atom kernel: [ 11.599581] r8169 0000:03:00.0: em1: link down May 28 18:00:16 atom kernel: [ 11.600289] ADDRCONF(NETDEV_UP): em1: link is not ready May 28 18:00:17 atom kernel: [ 11.755042] lirc_serial: auto-detected active low receiver May 28 18:00:17 atom kernel: [ 11.755204] lirc_serial lirc_serial.0: lirc_dev: driver lirc_serial registered at minor = 0 May 28 18:00:19 atom network[588]: Bringing up interface em1: [ OK ] May 28 18:00:19 atom kernel: [ 14.100351] r8169 0000:03:00.0: em1: link up May 28 18:00:19 atom kernel: [ 14.100986] ADDRCONF(NETDEV_CHANGE): em1: link becomes ready May 28 18:00:22 atom vdr: [783] VDR version 2.1.6 started May 28 18:00:22 atom vdr: [783] codeset is 'UTF-8' - known May 28 18:00:22 atom vdr: [783] loading plugin: /home/rs/vdr/PLUGINS/lib/libvdr-dvbhddevice.so.2.1.6 May 28 18:00:22 atom vdr: [783] loading plugin: /home/rs/vdr/PLUGINS/lib/libvdr-femon.so.2.1.6 May 28 18:00:22 atom vdr: [783] loading plugin: /home/rs/vdr/PLUGINS/lib/libvdr-dvd.so.2.1.6 May 28 18:00:22 atom vdr: [783] loading plugin: /home/rs/vdr/PLUGINS/lib/libvdr-dvdswitch.so.2.1.6 May 28 18:00:22 atom vdr: [783] loading plugin: /home/rs/vdr/PLUGINS/lib/libvdr-streamdev-server.so.2.1.6 May 28 18:00:22 atom systemd[1]: Startup finished in 1s 518ms 652us (kernel) + 2s 475ms 105us (initrd) + 12s 930ms 930us (userspace) = 16s 924ms 687us. May 28 18:00:22 atom vdr: [783] loading /mnt/storage/video/setup.conf May 28 18:00:22 atom vdr: [783] ERROR: unknown config parameter: streamdev-server.SuspendMode = 1 May 28 18:00:22 atom vdr: [783] loading /mnt/storage/video/sources.conf May 28 18:00:22 atom vdr: [783] loading /mnt/storage/video/diseqc.conf May 28 18:00:22 atom vdr: [783] loading /mnt/storage/video/scr.conf May 28 18:00:22 atom vdr: [783] loading /mnt/storage/video/channels.conf May 28 18:00:22 atom vdr: [783] loading /mnt/storage/video/timers.conf May 28 18:00:22 atom vdr: [783] loading /mnt/storage/video/svdrphosts.conf May 28 18:00:22 atom vdr: [783] loading /mnt/storage/video/remote.conf May 28 18:00:22 atom vdr: [783] loading /mnt/storage/video/keymacros.conf May 28 18:00:22 atom vdr: [783] loading /mnt/storage/video/folders.conf May 28 18:00:22 atom vdr: [783] DVB API version is 0x050A (VDR was built with 0x0504) May 28 18:00:22 atom vdr: [783] frontend 1/0 provides DVB-S,DVB-S2,DSS with QPSK ("STV090x Multistandard") May 28 18:00:22 atom vdr: [783] found 2 DVB devices May 28 18:00:22 atom vdr: [783] using only 1 DVB device May 28 18:00:22 atom vdr: [783] initializing plugin: dvbhddevice (2.1.6): HD Full Featured DVB device May 28 18:00:22 atom vdr: [783] initializing plugin: femon (2.1.1): DVB Signal Information Monitor (OSD) May 28 18:00:22 atom vdr: [783] initializing plugin: dvd (0.3.6-b03): turn VDR into an (almost) full featured DVD player May 28 18:00:22 atom vdr: [783] initializing plugin: dvdswitch (0.2.2): Allows playback of DVD images May 28 18:00:22 atom vdr: [783] dvdswitch: use DVD Device: /dev/dvd May 28 18:00:22 atom vdr: [783] dvdswitch: create link /mnt/storage/video/plugins/dvdswitch/dvdlink to /dev/dvd May 28 18:00:22 atom vdr: [783] WARNING - DVD drive not found: /mnt/storage/video/plugins/dvdswitch/dvdlink May 28 18:00:22 atom vdr: [783] initializing plugin: streamdev-server (0.6.0-git): VDR Streaming Server May 28 18:00:22 atom vdr: [783] setting primary device to 1 May 28 18:00:22 atom vdr: [783] device 1 has no MPEG decoder May 28 18:00:22 atom vdr: [783] SVDRP listening on port 6419 May 28 18:00:22 atom vdr: [783] setting current skin to "classic" May 28 18:00:22 atom vdr: [783] loading /mnt/storage/video/themes/classic-default.theme May 28 18:00:22 atom vdr: [783] starting plugin: dvbhddevice May 28 18:00:22 atom vdr: [783] starting plugin: femon May 28 18:00:22 atom vdr: [783] starting plugin: dvd May 28 18:00:22 atom vdr: [783] starting plugin: dvdswitch May 28 18:00:22 atom vdr: [783] starting plugin: streamdev-server May 28 18:00:22 atom vdr: [783] loading /mnt/storage/video/plugins/streamdev-server/streamdevhosts.conf May 28 18:00:22 atom vdr: [783] switching to channel 1 May 28 18:00:22 atom vdr: [795] Streamdev: Listening (VTP) on port 2004 May 28 18:00:22 atom vdr: [795] Streamdev: Listening (HTTP) on port 3000 May 28 18:00:22 atom vdr: [783] ERROR: no OSD provider available - using dummy OSD! May 28 18:00:28 atom vdr: [783] timer 1 (3 1755-1910 '3 News') set to event Wed 28.05.2014 18:00-19:00 '3 News' May 28 18:00:28 atom vdr: [783] timer 2 (4 2025-2110 'All New New Girl') set to event Mon 02.06.2014 20:30-21:00 'All New New Girl' May 28 18:00:28 atom vdr: [783] timer 3 (4 2150-2235 'Parks And Recreation') set to event Mon 02.06.2014 21:55-22:25 'Parks And Recreation' May 28 18:00:28 atom vdr: [783] timer 4 (3 1925-2040 'All New Grand Designs') set to event Tue 03.06.2014 19:30-20:30 'All New Grand Designs' May 28 18:00:28 atom vdr: [783] timer 5 (8 2205-2255 'Autospeed') set to event Wed 28.05.2014 22:30-23:00 'Stupid, Stupid Man' May 28 18:00:28 atom vdr: [783] timer 6 (1 2025-2140 'Broadchurch') set to event Sun 01.06.2014 20:30-21:30 'Broadchurch' May 28 18:00:28 atom vdr: [783] timer 7 (3 2225-2345 'House Of Cards') set to event Sun 01.06.2014 22:30-23:35 'House Of Cards' May 28 18:00:28 atom vdr: [783] timer 1 (3 1755-1910 '3 News') start May 28 18:00:28 atom vdr: [783] record /mnt/storage/video/3_News/_/2014-05-28.17.55.3-0.rec May 28 18:00:29 atom vdr: [783] ERROR: Channel locked (recording)! May 28 18:00:30 atom vdr: [794] channel 3 (TV 3) event Wed 28.05.2014 18:00-19:00 '3 News' status 4
vdr 2.1.6 FPGA firmware 1.09 SAA716x firmware 0.3.9
Regards,
Richard
On 28.05.2014 07:59, Richard Scobie wrote:
I am currently having problems with either cabling or the Diseq switch attached to tuner 0 on my TT S2 6400, so as a workaround, I thought I could use the "- D 1" switch to vdr, to force using tuner 1 only.
When I do this, it seems vdr does not see the card as full featured any more - no MPEG decoder and no OSD: ...
That's because the "full featured" part of the TT S2-6400 is linked to tuner 0.
Klaus
Hi,
Am 28.05.2014 09:03, schrieb Klaus Schmidinger:
On 28.05.2014 07:59, Richard Scobie wrote:
I am currently having problems with either cabling or the Diseq switch attached to tuner 0 on my TT S2 6400, so as a workaround, I thought I could use the "- D 1" switch to vdr, to force using tuner 1 only.
When I do this, it seems vdr does not see the card as full featured any more - no MPEG decoder and no OSD: ...
That's because the "full featured" part of the TT S2-6400 is linked to tuner 0.
I'm not a DVB-S user, but maybe you can use the diseqc.conf to bound device 1 (tuner 0) to a source you haven't in your channels.conf (like a none existing S1E).
OTOH you can write a plugin which provides an device hook, that returns always false in "DeviceProvidesTransponder" if the given device is a cDvbDevice and has an adapter/frontend of 0/0.
Lars.
Klaus
vdr mailing list vdr@linuxtv.org http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr
Lars Hanisch wrote:
Hi,
Am 28.05.2014 09:03, schrieb Klaus Schmidinger:
On 28.05.2014 07:59, Richard Scobie wrote:
I am currently having problems with either cabling or the Diseq switch attached to tuner 0 on my TT S2 6400, so as a workaround, I thought I could use the "- D 1" switch to vdr, to force using tuner 1 only.
When I do this, it seems vdr does not see the card as full featured any more - no MPEG decoder and no OSD: ...
That's because the "full featured" part of the TT S2-6400 is linked to tuner 0.
I'm not a DVB-S user, but maybe you can use the diseqc.conf to bound device 1 (tuner 0) to a source you haven't in your channels.conf (like a none existing S1E).
OTOH you can write a plugin which provides an device hook, that returns always false in "DeviceProvidesTransponder" if the given device is a cDvbDevice and has an adapter/frontend of 0/0.
Lars.
Klaus
Thanks both, I'll just swap the input cables for now.
Regards,
Richard
-
Klaus Schmidinger -
Lars Hanisch -
Richard Scobie