[linux-dvb] Twinhan Cab-CI 2031
perda at oden.cnwab.se
Wed Dec 14 09:14:36 CET 2005
I have the same card as You and I had also problems with tuning/scaning
berfore I changed the dst_tlist to be
".type_flags = DST_TYPE_HAS_NEWTUNE | DST_TYPE_HAS_FW_2" as Manu suggested.
I have not tested the new combined v4l/dvb cvs yet (hope that I will
find som time for that during the weekend).
So try to change and see if it makes any difference.
> >From what I can tell, they already have a channels.conf, but I am
> unable to create one.
> Svein Olav Bjerkeset wrote:
>>Check this link from the mailing list archive:
>>Svein Olav Bjerkeset
>>>I have a Twinhan Cab-CI card and I've been trying to get it to work in
>>>my Debian machine, I want to use it as a MythTV backend eventually. The
>>>card is a model 20310(says so on the box). At first I tried it with the
>>>drivers that came with 18.104.22.168, but all I got from scan was ">>>
>>>tuning status == 0x00". So I tried the more-or-less latest CVS and a
>>>snapshot, but the only difference was that the scanning got faster(it
>>>was very slow at first). Right now I compiled a 22.214.171.124 kernel without
>>>any DVB drivers(only the dvb-core) included and installed the CVS
>>>versions, again only >>> tuning status == 0x00.
>>>So I'm wondering, does this card work at all? I understand that there
>>>are different versions? Also, all my channels are encrypted with Conax,
>>>but I do have a CAM and it works in my win machine. Nevertheless, I was
>>>under the impression, that I should still be able to detect the
>>>channels, just not watch them, if the CAM part doesn't work?
>>>It's very likely I'm just doing something wrong or missing a step...
>>>part of dmesg:
>>>Linux video capture interface: v1.00
>>>bttv: driver version 0.9.16 loaded
>>>bttv: using 8 buffers with 2080k (520 pages) each for capture
>>>bttv: Bt8xx card found (0).
>>>ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 19
>>>ACPI: PCI Interrupt 0000:02:07.0[A] -> Link [LNKB] -> GSI 19 (level,
>>>low) -> IRQ 17
>>>bttv0: Bt878 (rev 17) at 0000:02:07.0, irq: 17, latency: 64, mmio:
>>>bttv0: detected: Twinhan VisionPlus DVB [card=113], PCI subsystem ID is
>>>bttv0: using: Twinhan DST + clones [card=113,autodetected]
>>>bttv0: gpio: en=00000000, out=00000000 in=00f100fd [init]
>>>bttv0: using tuner=4
>>>bttv0: add subdevice "dvb0"
>>>bt878: AUDIO driver version 0.0.0 loaded
>>>bt878: Bt878 AUDIO function found (0).
>>>ACPI: PCI Interrupt 0000:02:07.1[A] -> Link [LNKB] -> GSI 19 (level,
>>>low) -> IRQ 17
>>>bt878(0): Bt878 (rev 17) at 02:07.1, irq: 17, latency: 64, memory:
>>>DVB: registering new adapter (bttv0).
>>>dst_get_device_id: Recognise [DCT-CI]
>>>DST type flags : 0x1 newtuner 0x2 ts204 0x8 firmware version = 1 0x10
>>>firmware version = 2
>>>dst_get_mac: MAC Address=[00:08:ca:16:15:00]
>>>dst_ca_attach: registering DST-CA device
>>>DVB: registering frontend 0 (DST DVB-C)...
>>>linux-dvb mailing list
>>>linux-dvb at linuxtv.org
> linux-dvb mailing list
> linux-dvb at linuxtv.org
More information about the linux-dvb