[linux-dvb] Twinhan DTV MiniCAB recognized as terrestrial card

Henrik Sjöberg henke at epact.se
Thu May 12 09:36:41 CEST 2005


Hi,

I'm using kernel 2.6.11.8, which should have the patches you mention.
I am still seeing the same kinds of problem. Even with the asic_delay
patch posted earlier and asic_delay set to 10,30,40,50 and 100.

When trying to scan, dmesg still tells me:
Set Frequency = [522000000]
dst_comm_init: Initializing DST..
dst_gpio_outb: mask=[ffffffff], enbb=[0001], outhigh=[0000]
rdc_reset_state: Resetting state machine
dst_gpio_outb: mask=[0002], enbb=[0002], outhigh=[0000]
dst_gpio_outb: mask=[0002], enbb=[0002], outhigh=[0002]
write_dst writing 07 f7 10 00 08 00 00 ea
dst_gpio_outb: mask=[ffffffff], enbb=[0000], outhigh=[0000]
read_dst reply is 0xff
dst_wait_dst_ready: dst wait ready after 1
read_dst reply is 0x9
 0xc1 0x11 0xbd 0x0 0x26 0x0 0x0
dst_get_tuna: checksum failure?
Set Frequency = [522000000]
dst_comm_init: Initializing DST..
dst_gpio_outb: mask=[ffffffff], enbb=[0001], outhigh=[0000]
rdc_reset_state: Resetting state machine
dst_gpio_outb: mask=[0002], enbb=[0002], outhigh=[0000]
dst_gpio_outb: mask=[0002], enbb=[0002], outhigh=[0002]
write_dst writing 07 f7 10 00 08 00 80 6a
write_dst: _write_dst error (err == -5, len == 0x08, b0 == 0x07)
dst_error_recovery: Trying to return from previous errors...
dst_gpio_outb: mask=[ffffffff], enbb=[0000], outhigh=[0000]
dst_gpio_outb: mask=[ffffffff], enbb=[0001], outhigh=[0000]
dst_gpio_outb: mask=[ffffffff], enbb=[0000], outhigh=[0000]
read_dst reply is 0xff
dst_wait_dst_ready: dst wait ready after 1
read_dst reply is 0x9
 0xc1 0x11 0xbd 0x0 0x26 0x0 0x0
dst_get_tuna: checksum failure?


Am I correct in my assumptions that 2.6.11.8 contains the patches?

/Henrik

-------------------
> Mikko Hamalainen wrote:
> 
> >Hello,
> >
> >For some reason my Twinhan DTV MiniCAB is recognized as terrestrial
card
> >by the latest CVS drivers. Are there some module parameters I
should
> >change in order to make it detect correctly as cable card? The card
in
> >question has model number VP-2010.
> >  
> >
> What does dst_get_device_id return, while loading the modules ?
> 
> Manu.
> 
> >Best regards,
> >Mikko.
> >
> >_______________________________________________
> >linux-dvb mailing list
> >linux-dvb at linuxtv.org
> >http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
> >
> >
> >
> >  
> >
> 
> 
> _______________________________________________
> linux-dvb mailing list
> linux-dvb at linuxtv.org
> http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
> 




More information about the linux-dvb mailing list