[linux-dvb] Kworld V-Stream Xpert DVB-T PCI card: installing

Thomas Rynne thomas.rynne at gmail.com
Sun May 15 09:52:19 CEST 2005


On 5/8/05, Soyeb Aswat <soyeb at btinternet.com> wrote:
> Hi Thomas,
> 
> Judging from your PCI ID, it's got a Samsung tuner (that's the good
> one).  You'll need the mt352 frontend.
> 
> I'm currently using SuSE 9.3 default kernel 2.6.11.4-20a-smp and doing
> the following to load up the correct modules:
> 
> -snip-
>
> I dunno if the standard 2.6.11 contains everything you need, though it
> should work if you install a v4l cvs dump from bytesex.
> 
> Regards,
> Soyeb
> 

Thanks for the help,

  I've download 
<http://www.mirrorservice.org/sites/ftp.kernel.org/pub/linux/kernel/v2.6/linux-2.6.11.5.tar.bz2>
  and
<http://dl.bytesex.org/cvs-snapshots/video4linux-2005-05-11-195924.tar.gz>

and built the kernel and v4l source (I had to copy the v4l modules
into the right place). When I run the modprobe script in the previous
message many modules do get loaded but I get the following errors:
FATAL: Error inserting cx88xx
(/lib/modules/2.6.11.4.20050514/v4l2/cx88xx.ko): Unknown symbol in
module, or unknown parameter (see dmesg)
WARNING: Error inserting cx88xx
(/lib/modules/2.6.11.4.20050514/v4l2/cx88xx.ko): Unknown symbol in
module, or unknown parameter (see dmesg)
FATAL: Error inserting cx8800
(/lib/modules/2.6.11.4.20050514/v4l2/cx8800.ko): Unknown symbol in
module, or unknown parameter (see dmesg)
WARNING: Error inserting cx88xx
(/lib/modules/2.6.11.4.20050514/v4l2/cx88xx.ko): Unknown symbol in
module, or unknown parameter (see dmesg)
FATAL: Error inserting cx8802
(/lib/modules/2.6.11.4.20050514/v4l2/cx8802.ko): Unknown symbol in
module, or unknown parameter (see dmesg)
WARNING: Error inserting cx88xx
(/lib/modules/2.6.11.4.20050514/v4l2/cx88xx.ko): Unknown symbol in
module, or unknown parameter (see dmesg)
WARNING: Error inserting cx8802
(/lib/modules/2.6.11.4.20050514/v4l2/cx8802.ko): Unknown symbol in
module, or unknown parameter (see dmesg)
FATAL: Error inserting cx88_dvb
(/lib/modules/2.6.11.4.20050514/v4l2/cx88-dvb.ko): Unknown symbol in
module, or unknown parameter (see dmesg)

Here's some of dmesg, there's more than this but its the same type of thing:
cx8802: Unknown symbol cx88_core_irq
cx8802: Unknown symbol cx88_sram_channels
cx8802: Unknown symbol cx88_sram_channel_dump
cx8802: Unknown symbol cx88_sram_channel_setup
cx8802: Unknown symbol cx88_free_buffer
cx8802: Unknown symbol cx88_boards
cx8802: Unknown symbol cx88_risc_databuffer
cx88xx: Unknown symbol ir_decode_biphase
cx88xx: Unknown symbol ir_codes_hauppauge_new
cx88xx: Unknown symbol ir_codes_winfast
cx88xx: Unknown symbol ir_dump_samples
cx8802: Unknown symbol cx88_reset
cx8802: Unknown symbol cx88_wakeup
cx8802: Unknown symbol cx88_risc_stopper
cx8802: Unknown symbol cx88_print_irqbits
cx8802: Unknown symbol cx88_shutdown
cx8802: Unknown symbol cx88_mpeg_irqs
cx8802: Unknown symbol cx88_core_irq
cx8802: Unknown symbol cx88_sram_channels
cx8802: Unknown symbol cx88_sram_channel_dump
cx8802: Unknown symbol cx88_sram_channel_setup
cx8802: Unknown symbol cx88_free_buffer
cx8802: Unknown symbol cx88_boards
cx8802: Unknown symbol cx88_risc_databuffer
cx88_dvb: Unknown symbol cx8802_fini_common
cx88_dvb: Unknown symbol cx88_core_put
cx88_dvb: Unknown symbol cx88_core_get
cx88_dvb: Unknown symbol cx8802_resume_common
cx88_dvb: Unknown symbol cx8802_buf_prepare
cx88_dvb: Unknown symbol cx8802_init_common
cx88_dvb: Unknown symbol cx88_free_buffer
cx88_dvb: Unknown symbol cx88_boards

Any help much appreciated.

Also, Soyeb, does you card work out of the box in suse 9.3?
Maybe I should try that.

Thomas




More information about the linux-dvb mailing list