[linux-dvb] FusionHDTV 5 Lite tuner type not set

Jate jate.sujj at gmail.com
Sun Oct 30 01:42:27 CEST 2005

Today, I finally got the opportunity to try my FusionHDTV 5 Lite card on a
Fedora Core install. I obtained the kernel
kernel-2.6.13-1.1532_FC4.src.rpmand recompiled using V4L Wiki
instructions. Then, I compiled the current v4l
and dvb trees from CVS.
 Right now I'm just testing out analog. Here's what I get from dmesg:
 bttv0: Bt878 (rev 17) at 0000:00:11.0, irq: 11, latency: 64, mmio:
bttv0: detected: DViCO FusionHDTV 5 Lite [card=135], PCI subsystem ID is
bttv0: using: DViCO FusionHDTV 5 Lite [card=135,autodetected]
bttv0: gpio: en=00000000, out=00000000 in=00ffffff [init]
bttv0: using tuner=64
tuner 1-0061: chip found @ 0xc2 (bt878 #0 [sw])
bttv0: registered device video0
bttv0: registered device vbi0
tuner 1-0061: tuner type not set
bttv0: add subdevice "dvb0"
bt878: AUDIO driver version 0.0.0 loaded
bt878: Bt878 AUDIO function found (0).
ACPI: PCI Interrupt 0000:00:11.1[A] -> Link [LNKB] -> GSI 11 (level, low) ->
IRQ 11
bt878(0): Bt878 (rev 17) at 00:11.1, irq: 11, latency: 64, memory:
DVB: registering new adapter (bttv0).
DVB: registering frontend 0 (LG Electronics LGDT3303 VSB/QAM Frontend)...
 Starting tvtime gives me several of the 'tuner 1-0061: tuner type not set'
messages. What might be going on? This card works under windows.
 - Jate S.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://www.linuxtv.org/pipermail/linux-dvb/attachments/20051029/45396720/attachment.htm

More information about the linux-dvb mailing list