[linux-dvb] First Generation Air2PC card

Blammo blammo.doh at gmail.com
Thu Sep 8 10:33:38 CEST 2005

On 8/20/05, Steve Malenfant <smalenfant at gmail.com> wrote:
> I have a small problem with my Rev 0.2 Air2Pc card which I can find a
> easy workaround when I boot my machine.  I got 2 of those in my system
> which works extremely good.  The issue is that when the system boot
> up, the cards gives status of all 0's even if the card is able to
> receive data (example with dvbsnoop).  When MythTV starts, it will
> deactivate the cards because it assumes they don't work (status is not
> 1f).  It takes about 2-3 minutes for the car to start giving out good
> status.  Is there a way to fix that problem or is this a known problem
> with these cards?  Is this the firmware that takes this long to send
> to the cards?  I don't see any messages in the /var/log/messages or in
> the "dmesg" that shows that any firmware been sent to the card.

Same problem here.. sometimes up to 5 minutes... drives me crazy.
Would love to see it fixed some how.. My Rev3 cards don't do it.

More information about the linux-dvb mailing list