[linux-dvb] pinnacle sat's success

Nando Romano darkside_moon83 at yahoo.it
Thu Sep 8 13:09:10 CEST 2005

I have re-compile drivers and modules 
 bttv  (bt878)

I excute with root's privileges
modprobe bttv i2c_hw=1 card=0x68
modprobe dvb-bt8xx
modprobe cx24110

and dmesg  show me

bttv: driver version 0.9.15 loaded
bttv: using 8 buffers with 2080k (520 pages) each for
bttv: Bt8xx card found (0).
ACPI: PCI interrupt 0000:02:07.0[A] -> GSI 19 (level,
low) -> IRQ 177
bttv0: Bt878 (rev 17) at 0000:02:07.0, irq: 177,
latency: 64, mmio: 0xf7c00000
bttv0: detected: Pinnacle PCTV Sat [card=94], PCI
subsystem ID is 11bd:001c
bttv0: using: Nebula Electronics DigiTV
[card=104,insmod option]
bttv0: gpio: en=00000000, out=00000000 in=009f00fc
bttv0: using tuner=-1
bttv0: registered device video0
bttv0: registered device vbi0
bttv0: PLL: 28636363 => 35468950 . ok
bttv0: add subdevice "dvb0"
bt878: AUDIO driver version 0.0.0 loaded
bt878: Bt878 AUDIO function found (0).
ACPI: PCI interrupt 0000:02:07.1[A] -> GSI 19 (level,
low) -> IRQ 177
bt878(0): Bt878 (rev 17) at 02:07.1, irq: 177,
latency: 64, memory: 0xf7d00000
dvb_bt8xx: Unknown parameter `debug:Turn'
DVB: registering new adapter (bttv0).
xxx attach
DVB: registering frontend 0 (Conexant CX24110 with
CX24108 tuner, aka HM1221/HM1811)...

I think that 
now it has to work

even if I declare that my dvb-s pinnacle card is a
Nebula (I think 
that Nebula is similar to Pinnacle)
in the output of dmesg I read that the system has
created a subdevice dvb 
and it has associated a frontend connexant 

Therefore so I can proceed without fears that my
system is  going down 
(the card is caught fire)
with the scan of the transponder to obtain the channel
with szap

Can I ask you your opinion about the output of dmesg ?
Do you have any suggestion?

Thanks a lots 

(thank nico)


Yahoo! Mail: gratis 1GB per i messaggi e allegati da 10MB 

More information about the linux-dvb mailing list