[linux-dvb] TT-Budget C-1501
sigmund at snap.tv
Thu Apr 17 10:53:26 CEST 2008
I have also added support for this card based on the little change you
showed here and some looking around in other drivers. I have gotten
information from technotrend that the proper i2c address for the tuner
is 0x61 (or 0xc2 as these adresses sometimes appear shifted for some
reason). With this address and the tuner driver loaded in debug mode I
seem to get some more response from the tuner, but still no lock.
Now looking at the tda827x.c sources it seems this driver was
specifically written for dvb-t usage, and I'm uncertain wether it would
work out of the box for dvb-c. There are also some parts of the code I
don't understand, for instance the agcf callback. Harmut, do you know
anything more about this? The AGC2 gain value that is printed in debug
usually show 4 or 5 now, does this indicate a good signal or a bad
Also there is still the occational i2c timeouts that Stephen reported.
I'm not sure wether they are caused by the tuner or the demod, but they
appear to come so seldom that it should be able to complete a tuning
cycle. Any feedback on this would be welcome as well. Maybe Oliver has
some suggestions how to debug this?
ons, 16.04.2008 kl. 21.08 +0100, skrev Stephen Dawkins:
> Arthur Konovalov wrote:
> > Stephen Dawkins wrote:
> >>>>I'm not entirely sure what I need todo next to get it working, any help
> >>>>will be greatly appreciated.
> >>>See m920x.c or saa7134-dvb.c for drivers using tda10046 and/or tda827x.
> >>I will take a look at them.
> > Hi,
> > do You have progress in that direction?
> > I'll very concerned, because I have this card too.
> > Arthur
> Not yet I'm afraid.
> > _______________________________________________
> > linux-dvb mailing list
> > linux-dvb at linuxtv.org
> > http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
> linux-dvb mailing list
> linux-dvb at linuxtv.org
More information about the linux-dvb