[linux-dvb] Cinergy Hybrid XE with tm6010 chip

Mark Breddemann alles at bredde.de
Tue Dec 2 09:28:58 CET 2008


br wrote:
> Hi,
> I've got a Cinergy Hybrid XE DVB-T USB Stick, which has got a tm6010
> chip inside (I opened the case just to get sure). Quite fast I realized,
> that there are no stable Linux drivers out there, so i tried the
> unstable one.
> So I checked out the repo at http://linuxtv.org/hg/~mchehab/tm6010/ and
> compiled (without DVB), installed, loaded the module and then inserted
> the stick and well.. nothing happened, because the driver did not knew
> about my device. To fix this, i added the line
> { USB_DEVICE(0x0ccd, 0x0086), .driver_info = TM6010_BOARD_GENERIC },
> to file tm6000-cards.c (my lsusb output is 'Bus 008 Device 004: ID
> 0ccd:0086 TerraTec Electronic GmbH'). I do not know, whether
> TM6010_BOARD_GENERIC is the correct one, but for me it seemed to be the
> best solution.
> Afterward, the driver recognized my stick and began to work:
> http://pastebin.com/f79722ed2 . In short: The firmware's missing. So I
> extracted the firmware with help of a python script I found on the
> internet and put it to the right place. Here's the (long) result:
> http://pastebin.com/f6c853b43
> I'm not surprised that my journey has failed, because I do not really
> know what my added line does (good old try'n'error), so my question:
> Where to go from here?
> Mark
> _______________________________________________
> linux-dvb mailing list
> linux-dvb at linuxtv.org
> http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb

More information about the linux-dvb mailing list