[linux-dvb] merhaba: About Avermedia DVB-S Hybrid+FM A700
hermann-pitton at arcor.de
Sat May 17 23:38:19 CEST 2008
Am Sonntag, den 18.05.2008, 00:23 +0300 schrieb bvidinli:
> thank you for your answer,
> may i ask,
> what is meant by "analog input", it is mentioned on logs that:" only
> analog inputs supported yet.." like that..
> is that mean: s-video, composit ?
yes, only s-video and composite is enabled there.
Better we would have print only external analog inputs.
> (i installed mythtv on ubuntu kernel 2.6.26.rc2 , it shows in input
> connections only svideo and composit... )
> i want to scan air-tv channels, and dvb-s channels...
> aren't these supported yet ?
Not with 2.6.26, but likely with Matthias' patches.
> i will check your suggestions... and try...
> thanks again
> 2008/5/17 Eduard Huguet <eduardhc at gmail.com>:
> > Hi,
> > You should maybe try the patches that Matthias Schwarzott made for
> > non-hybrid variant of the A700 card (the one I use). They implement the add
> > DVB-S support for that card, and it's running fine now for me. don't know
> > if these patches might be also valid for the Hybrid version, but it's
> > probably worth the try.
> > You can find the patches in the Avermedia A700 wiki page of LinuxTV,
> > here:
> > http://www.linuxtv.org/wiki/index.php/AVerMedia_AVerTV_DVB-S_Pro_%28A700%29
> > Take the lastest full diff file from ZZam's repository and apply it
> > over the current HG tree. If you are unsure about how to proceed, myou
> > should first take a look at the howto page regarding LinuxTV drivers
> > install:
> > http://www.linuxtv.org/wiki/index.php/How_to_install_DVB_device_drivers
> > Good luck :D
> > Eduard Huguet
> >> ---------- Missatge reenviat ----------
> >> From: bvidinli <bvidinli at gmail.com>
> >> To: linux-dvb at linuxtv.org, "fahri donmez" <fahridon at gmail.com>,
> >> ozbilen at gmail.com
> >> Date: Sat, 17 May 2008 13:16:14 +0300
> >> Subject: [linux-dvb] merhaba: About Avermedia DVB-S Hybrid+FM A700
> >> i just compiled kernel version 2.6.26.rc2 on my ubuntu linux 8.04,
> >> many things including sound not working, but i got finally name of my
> >> tv/dvb card on dmesg output.
> >> previously i was getting UNKNOWN/GENERIC on dmesg for my tv card,
> >> i use tvtime-scanner or tvtime, it does not scan, even analog channels,
> >> i use following to try new tuners, :
> >> rmmod saa7134
> >> modprobe saa7134 card=141 tuner=2
> >> i run these two lines fo rtuner 0,1,2,3 and so on... to try different
> >> tuner numbers... on some numbers, computers locks down.. i had to
> >> reset...
> >> currently i have two questions:
> >> 1- what is correct statements/commands to be able to scan tv channels...
> >> 2- the log says only analog inputs available now, when it will be
> >> possible to watch dvb channels ?
> >> 3- what is best/good tutorials/sites that describe/help in
> >> dvb/tv/multimedia for ubuntu/linux, (i already looked linuxtv,
> >> searched google, many sites..)
> >> thanks.
> >> logs: dmesg,
> >> [ 39.243703] saa7133: found at 0000:00:14.0, rev: 209, irq: 12,
> >> latency: 32, mmio: 0xde003000
> >> [ 39.243776] saa7133: subsystem: 1461:a7a2, board: Avermedia
> >> DVB-S Hybrid+FM A700 [card=141,autodetected]
> >> [ 39.243858] saa7133: board init: gpio is b400
> >> [ 39.243909] saa7133: Avermedia DVB-S Hybrid+FM A700: hybrid
> >> analog/dvb card
> >> [ 39.243915] saa7133: Sorry, only the analog inputs are supported for
> >> now.
More information about the linux-dvb