Hi,<br><br>I had the same problem for a long time.<br>For me it helps to boot in windows (with vendor driver installed) and reboot in linux (not poweroff).<br>That helped for a while.<br>Now the PCI subsystem ids of the card are incorrect. People say this happens quite often.
<br>I have patched the drivers to ignore the subsystem ids for bt8.. drivers.<br><br>You are better off buying other cards. Twinhan cards have a lot of problems:<br>- not very stable<br>- signal and quality are not reported correctly.
<br>- eeprom gets corrupted and subsystem id are wrong.<br>I can go on ...<br><br>Regards,<br>Ilariu<br><br><br><div><span class="gmail_quote">On 7/11/07, <b class="gmail_sendername">Joel Michael</b> <<a href="mailto:firstname.lastname@example.org">
email@example.com</a>> wrote:</span><blockquote class="gmail_quote" style="border-left: 1px solid rgb(204, 204, 204); margin: 0pt 0pt 0pt 0.8ex; padding-left: 1ex;">Joel Michael wrote:<br>> The machine I'm running the card on is a Core2 Duo (x86_64 mode), on an
<br>> Asus P5B-VM motherboard, running the Gentoo distribution. I've tried<br>> with and without preempt, and am going to try without SMP tonight, and<br>> maybe try it in 32-bit mode. I've also tried removing the pair of
<br>> FlexCopII's, with no success.<br>><br>I've dug into the source a bit, and it seems that in<br>drivers/media/video/bt8xx/bttv-i2c.c, I get an interrupt from the card<br>without BT848_INT_RACK set, but BT848_INT_I2CDONE is set. If someone
<br>can shed a bit of light on why this might be happening, it would be<br>greatly appreciated.<br><br>Right now, I'm off to see if it works at all in 32-bit mode.<br><br>_______________________________________________
<br>linux-dvb mailing list<br><a href="mailto:firstname.lastname@example.org">email@example.com</a><br><a href="http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb">http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb