[vdr] VDR behaviour with wrong NIT
abraham.manu at gmail.com
Sat Apr 25 17:44:25 CEST 2009
On Sat, Apr 25, 2009 at 7:32 PM, Goga777 <goga777 at bk.ru> wrote:
>> >> And which parameters are the wrong ones?
>> > these two parameters are wrong
>> > Frequency: 18437984 (= 11.95760 GHz) - should be another freq = 12.380
>> > Kind: 0 (0x00) [= DVB-S] - should be dvb-s2
>> > also, no any information about roll off factor, that's why vdr substituted roll off = auto , cx24116 based cards don't
>> > understand roll off = auto.
>> > Goga
>> > fixed ('00'): 0 (0x00)
>> > Modulation_type: 2 (0x02) [= 8PSK]
>> > Symbol_rate: 2506752 (= 26.4000)
>> > FEC_inner: 2 (0x02) [= 2/3 conv. code rate]
>> Well, if VDR is told this is a DVB-S transponder, while in fact it is
>> DVB-S2, I'm afraid there's nothing it can do about that.
>> Have you tried complaining to the provider?
> yes, sure.
> Answer from provider - "please use our official receivers"
> could you change VDR behaviour if in the NIT the rolloff is missing - is it possible to substitute roll off = 35 instead
> of roll off = auto ?
It would be buggy to use Rolloff=35%, when the actual rolloff
information is missing.
In fact this is a bug in the driver, that it can't sensibly use the
With regards to DVB-S2, the rolloff information is present in the
Stream header (MATYPE)
and the driver is supposed to return back the rolloff information from
the stream header.
According to EN300 468, a DVB-S2, NBC stream will not contain any
but whereas the information is available in the BBHEADER, which the
demodulator is able
In fact this is the job of the device driver and hence the reply from
the provider to use their
receiver, There are 2 options, fix the bug in the driver, or use a
What will you do, if you have a narrow transponder, the same way ?
More information about the vdr