[vdr] Use FF Card only as output device
cedo_n at yahoo.com
Fri Feb 13 16:44:02 CET 2009
I've get it from http://search.digikey.com/scripts/DkSearch/dksus.dll?Detail&name=497-8347-1-ND
About the oszilloscope and signals, sorry but I don't know...
Hope that you will fix your card soon,
----- Original Message ----
From: Patrick Maier <maierp at informatik.tu-muenchen.de>
To: VDR Mailing List <vdr at linuxtv.org>
Sent: Friday, February 13, 2009 11:36:28 AM
Subject: Re: [vdr] Use FF Card only as output device
>I and some of my friends had same problem with ff card (rev.1.3) after 5-6
> And replaced LNBP chip (located near bigest capacitor), now everything
> work as used to be.
> Total cost of repair was 10 euros ;)
I've also a rev. 1.3 so I will try to do the same :-)
Can you give me the part-number of that chip. Where did you get it?
So This is the power supply for the LNB and creates the different voltages
and frequencies telling which band and H/V is required.
Can I test the actual output with an oszilloscope? You know which signals
must be there when in low/high-band and H/V?
Greets and thank you
vdr mailing list
vdr at linuxtv.org
More information about the vdr