[vdr] RFE: Make VDR more friendly when using combinations of DVB-S, DVB-T and DVB-C

Klaus Schmidinger Klaus.Schmidinger at tvdr.de
Sun Jun 17 15:35:41 CEST 2012

On 17.06.2012 14:59, Udo Richter wrote:
>> Why not just patch VDR so it cycles through channels that use the same
>> channel number. No bothering with sql databases&  dependency, no
>> altering the real channel numbers, no real pain that I can think of.
>> For example, say you have 3 different sources using the same channel
>> number:
>> channel 100, dvb-s
>> channel 100, dvb-t
>> channel 100, dvb-c
>> You tune channel 100 from your remote, it tunes 100 dvb-s. Press 100
>> again and it tunes 100 dvb-t. And again, 100 dvb-c. And again, loop
>> back to 100 dvb-s. Also, instead of having to enter the channel number
>> to cycle through them, maybe just use different keys (skip +/-,
>> ffw/rew, some other keys) to cycle. If there's only one of that
>> channel number, the cycle keys don't do anything.
> I have a similar idea that I've carried in my head for some time. The idea is to extend the "channel number" by another character, like '.'. That way you can store the dvb-s channel as 100.1, the dvb-t as 100.2, and so on. Or if you have the same channel in HD and SD, give SD the 100.3.
> The channel number 100 would be an alias for one of the 100.x channels, ChUp/ChDown will go to 101 or 99 directly. Recordings for channel 100 will also pick the first available of them. By hitting a '.' key on the remote, you can still enter the sub level, where ChUp/ChDown cycles between 100.x channels, or for timers to record from a specific source. Hitting '.' again could return to the top level of numbers.

Well, none of the remote controls I have has a '.' key.


More information about the vdr mailing list