DiSEqC Setup

From VDR Wiki
Revision as of 19:49, 11 August 2010 by Hamigua (talk | contribs) (→‎Images)
Jump to navigation Jump to search


Author: Yinghong Liu

diseqcsetup - A bash setup script for VDR DiSEqC configuration

This script allows you to easily configure vdr DiSEqC, you do not need to know diseqc.conf rules. It has an interactive dialog interface, based on your diseqc device connection, set the 22k tone, Toneburst, DiSEqC 1.0/1.1/1.2 switching device. Of course you can complete the Non-standard user defined configuration, such committed and uncommitted to connect two DiSEqC settings, sequence repetition and specify the wait time, etc.


The main menu,select DiSEqC mode.
Specify the satellite
Select LNBF LO frequency
Set DiSEqC 1.1/2.1 uncommitted Switch
Non-standard user defined configuration
Set the first DiSEqC port
Non-standard user defined configuration menu

Software Requirements

  • bash
  • dialog
  • nano or vi


This script assumes that all config files are located in /video/vdr or /etc/vdr.It also can be specified by the dialog. sources.conf and setup.conf must be existed.