Em84xx-plugin: Difference between revisions

From VDR Wiki
Jump to navigation Jump to search
No edit summary
No edit summary
 
(10 intermediate revisions by one other user not shown)
Line 1: Line 1:
[[Image:em84xx.jpg]]

em84xx is an output-plugin for all em84xx-based decoder-cards and onboard-decoders.
em84xx is an output-plugin for all em84xx-based decoder-cards and onboard-decoders.


These instructions were tested and are working with an Intel P4 system, using Debian kernel 2.6.20 and a Sigma Designs RealMagic Xcard with an em8475 chip.
These instructions were tested and are working with an Intel P4 system, using Debian kernel 2.6.20 and a Sigma Designs RealMagic Xcard with an em8475 chip. It was modified from its original version which had support for SCART output. This will enable NTSC, component video out on the said card.


Get the realmagic-0.2.3 driver, which at this time can be found here:
Get the realmagic-0.2.3 driver, which at this time can be found here:


[realmagic-0.2.3.rar - http://www.zshare.net/download/4711211f908718/]
['''realmagic-0.2.3.rar''' - http://rapidshare.com/files/241313277/realmagic-0.2.3.rar]


'''Copy the contents of realmagic-0.2.3/lib to /usr/lib'''
Copy the contents of realmagic-0.2.3/lib to /usr/lib


Build the realmagic84xx.ko
Build the realmagic84xx.ko
Line 38: Line 40:
And here is the vdr-em84xx-0.0.15, the em84xx VDR plugin modified for NTSC component video out:
And here is the vdr-em84xx-0.0.15, the em84xx VDR plugin modified for NTSC component video out:


[vdr-em84xx-0.0.15.rar http://www.zshare.net/download/47139532ee99d1/]
['''vdr-em84xx-0.0.15.rar''' http://rapidshare.com/files/241313276/vdr-em84xx-0.0.15.rar]




Install it like any other VDR plugin by copying it into your '/PLUGINS/src' and make a symlink 'em84xx' to it.
Install it like any other VDR plugin by copying it into your '/PLUGINS/src' and make a symlink 'em84xx' to it.

ln -s em84xx-0.0.15 em84xx


Then compile the plugins from the vdr-source-dir with:
Then compile the plugins from the vdr-source-dir with:
Line 47: Line 51:
make plugins
make plugins


If you want mplayer support, compile with EMMPLAYER=1.
If you want mplayer support in VDR, compile with EMMPLAYER=1 (Makefile @ line 12).



Add to your VDR start line:
Add to your VDR start line:


-Pem84xx
-Pem84xx

If you want to mess with your system, try the following patch for mplayer (thanks to Helmut Auer). It will add the xcard as an output device (like dxr3).

['''ao_em84xx.c''' http://lists.mplayerhq.hu/pipermail/mplayer-dev-eng/2006-October/046796.html]


[[Category:Outdated Plugins]]

Latest revision as of 11:59, 25 November 2013

Em84xx.jpg

em84xx is an output-plugin for all em84xx-based decoder-cards and onboard-decoders.

These instructions were tested and are working with an Intel P4 system, using Debian kernel 2.6.20 and a Sigma Designs RealMagic Xcard with an em8475 chip. It was modified from its original version which had support for SCART output. This will enable NTSC, component video out on the said card.

Get the realmagic-0.2.3 driver, which at this time can be found here:

   [realmagic-0.2.3.rar - http://rapidshare.com/files/241313277/realmagic-0.2.3.rar]

Copy the contents of realmagic-0.2.3/lib to /usr/lib

Build the realmagic84xx.ko

   cd /path_to/realmagic-0.2.3

and then

   make

Copy the realmagic84xx.ko where_ever.

   insmod /where_ever/realmagic84xx.ko

Further more you can:

Create a directory:

   mkdir /lib/modules/your_kernel_version/misc

Copy the module:

   cp realmagic84xx.ko /lib/modules/your_kernel_version/misc

Finally issue this:

   ldconfig


And here is the vdr-em84xx-0.0.15, the em84xx VDR plugin modified for NTSC component video out:

   [vdr-em84xx-0.0.15.rar http://rapidshare.com/files/241313276/vdr-em84xx-0.0.15.rar]


Install it like any other VDR plugin by copying it into your '/PLUGINS/src' and make a symlink 'em84xx' to it.

   ln -s em84xx-0.0.15 em84xx

Then compile the plugins from the vdr-source-dir with:

   make plugins

If you want mplayer support in VDR, compile with EMMPLAYER=1 (Makefile @ line 12).

Add to your VDR start line:

   -Pem84xx

If you want to mess with your system, try the following patch for mplayer (thanks to Helmut Auer). It will add the xcard as an output device (like dxr3).

[ao_em84xx.c http://lists.mplayerhq.hu/pipermail/mplayer-dev-eng/2006-October/046796.html]