https://www.linuxtv.org/wiki/api.php?action=feedcontributions&user=Haraldov&feedformat=atomLinuxTVWiki - User contributions [en]2024-03-28T07:55:05ZUser contributionsMediaWiki 1.39.6https://www.linuxtv.org/wiki/index.php?title=MythTV&diff=9821MythTV2007-05-30T12:43:21Z<p>Haraldov: </p>
<hr />
<div>MythTV is a homebrew PVR [http://en.wikipedia.org/wiki/Digital_video_recorder] project started by Isaac Richards (mailto:ijr@po.cwru.edu). MythTV is currently on v0.20 and contains many features that take the system way beyond the original design of just a PVR. However, the heart of the system remains the PVR functionality, which allows the user to view real-time and recorded TV. The system itself supports a huge amount of functionality because of its modular nature[http://www.mythtv.org/modules.php?name=MythFeatures]. Once configured, full TV listings are available for many regions via the import of XML data listings.<br />
<br />
As of v0.16, support for DVB cards was brought into the core system (previously, a recompile was required specifically selecting the DVB options). Therefore, once the card has been installed and proven to be working it is added via the MythTV setup program as just another video source.<br />
<br />
Since Version 0.17 it also features a full automatic Scan of the DVB Channels.<br />
<br />
MythTV can work very easily with multiple video sources, and they can be UHF or DVB in any combination. Many examples of systems with UHF and DVB cards working together exist and some people have been known to have up to 8 TV cards with terabytes of data storage. Basic system requirements, however, are also very modest. I am currently running Redhat Fedora Core 2 on a 900Mhz Celeron system with 80Gb data, and one DVB-T card (Avermedia DVB-t 771) and a Hauppauge PVR-250 and it works without any problems. Obviously, a UHF card that doesn't have a hardware encoder built-in will need a faster processor as the video data will need to be encoded in realtime, but the joy of a DVB card is that the realtime MPEG2 datastream means that practically no CPU is required for video capture.<br />
<br />
Many guides exist to assist in the installation of MythTV, but the most detailed and well supported is Jarod Wilson's Fedora MythTVology [http://wilsonet.com/mythtv/fcmyth.php]. This is very detailed and is extensively used. This current mintained version is specifically aimed at Red Hat's Fedora Core 4, although previous (and non-maintained) versions exists for Fedora Core 3 [http://wilsonet.com/mythtv/fc3myth.php], Fedora Core 2 [http://wilsonet.com/mythtv/fc2myth.php] and Fedora Core 1 [http://wilsonet.com/mythtv/fc1myth.php]. Section 7 of the guide discusses the installation and configuration of the capture cards and is aimed at UHF capture cards such as the Hauppauge PVR-350. At this point, there is a separate guide compiled by Martin Smith specifically aimed at the DVB community [http://www.ethics-gradient.net/myth/mythdvb.html]. As of writing, there isn't much detail with respect to the 2.6 kernel so it may be necessary to visit the LinuxTV DVB mailing list website [http://www.linuxtv.org/lists.php] to help with resolving any DVB related issues.<br />
Update 30.05.07: The mythtv Wiki is a good resource for finding guides for using Mythtv with DVB cards [http://www.mythtv.org/wiki/index.php/Category:HOWTO] <br />
<br />
Once the DVB card has been configured and MythTV has been installed, possibly the most difficult task for the DVB owner will be the population of the MythTV database (mythconverg) with the relevant channel information. Luckily, a utility is available to make this easier [http://brej.org/dvb/index.html]. Although aimed at the UK this could be tailored to suit your local region by changing the command to run your local input file for the scan command. Once complete, a utility is available to actually download the TV listings for DVB-T [http://www.darkskiez.co.uk/index.php?page=tv_grab_dvb].<br />
<br />
MythTV is also available in a ready-built distribution called KnoppMyth[http://mysettopbox.tv/knoppmyth.html].<br />
<br />
MythTV also functions with a discrete frontend and backend configuration. The benefit of this, is that the frontend can exist as totally separate system. The backend is also able to support multiple frontends. The most obvious frontend is the standard MythTV installation itself with both front and back running on the same system. However, as well as other Linux based frontend systems, it is also possible to run the frontend on Windows[http://sourceforge.net/projects/winmyth], an Xbox running Linux [http://www.xbox-linux.org/] with MythTV installed [http://bit.blkbk.com/] and also an Xbox running XBox Media Centre [http://www.xboxmediacenter.de/] with Python and MythTV installed [http://www.xboxmediaplayer.de/cgi-bin/forums/ikonboard.pl?s=936298c5c672b787cb808db6620c6fe6;act=ST;f=21;t=2676]<br />
==External Links==<br />
* [http://www.mythtv.org/ The official MythTV homepage]<br />
* [http://mysettopbox.tv/knoppmyth.html Knoppix-based Myth CD-ROM Boot images]<br />
* [http://linpvr.org/ MythTV distribution for VIA EPIA Boards]<br />
* [http://bit.blkbk.com/ MythTV-XBox Release]<br />
* [http://www.gossamer-threads.com/lists/mythtv/ MythTV mailing list webpage]<br />
* [http://sourceforge.net/projects/winmyth Windows frontend for MythTV]<br />
* [http://www.xbox-linux.org/ Xbox for Linux homepage]<br />
* [http://bit.blkbk.com/ MythTV frontend for Linux on an XBox]<br />
* [http://www.xboxmediacenter.de/ XBox Media Centre homepage]<br />
*[http://www.xboxmediaplayer.de/cgi-bin/forums/ikonboard.pl?s=936298c5c672b787cb808db6620c6fe6;act=ST;f=21;t=2676 Discussion Thread for MythTV frontend running under Python on XBMC]<br />
* [http://www.digitalregime.com/mythdvb/ Page about MythDVB development / improvements]<br />
* [http://gentoo-wiki.com/HOWTO_Setup_MythTV HOWTO on creating a Gentoo based MythTV installation]<br />
<br />
* [http://en.wikipedia.org/wiki/Fluendo Fluendo] seems to be an alternative to MythTV ?<br />
<br />
[[Category:Software]]</div>Haraldovhttps://www.linuxtv.org/wiki/index.php?title=Example_setups&diff=9820Example setups2007-05-30T12:35:37Z<p>Haraldov: /* A sample solution for a system with a full-featured card */</p>
<hr />
<div>This page provides examples of working hardware and software system configurations that may provide guidance for readers as to what can be accomplished on or with their own system. <br />
<br />
If you believe you have a PVR / Linuxtv box that works well, please post a description that may be beneficial for others to read [such as your system hardware (mobo/chip/video), what TV tuner device you have (ideally with a link to the manufacturer's product page or to the device's entry here in the wiki) and with what kernel, drivers and software applications you operate on your system]. <br />
<br />
In order to be most useful for the reader, this page is divided into three sections: <br />
* setups for DVB cards that rely on "software decoding" (aka [[budget]] cards ... DVB cards without hardware decoders) <br />
* setups for DVB cards with hardware decoders (aka [[Full-featured Card|full featured cards]])<br />
* setups for analog TV cards (hey, shouldn't that sort of stuff rather be in the [http://linuxtv.org/v4lwiki/ video4linux wiki]?<br />
Each of the three sections can, in turn, be subdivided into categories covering the different standards (DVB-{C,S,T}, ATSC) for that type of hardware. Please add to the appropriate one, or create a new one if need be.<br />
<br />
Readers should note that the suggestions found here are just that -- suggestions. For a more complete listing of available software programs, see the [[commented software list]] page. Likewise, for more complete listings of supported hardware, consult the [Hardware & Components] section of the wiki.<br />
<br />
<br />
== A sample solution for a system with a budget DVB card ==<br />
My system is a [[Twinhan DTV Mini Ter]] on a cheap HP Pentium 4 1.2GHz. The graphic card is only an on-board Intel 82810E with shared memory, so nothing fancy. <br />
<br />
After installing the card drivers, I tried several solutions. I didn't get the [[VDR Software Decoder Plugin]] working so I tried [[xine]] -- which worked on the first trial and provides much functionality (for watching) on an easy and intuitive interface. <br />
<br />
---<br />
<br />
I use a [[Twinhan]] Express compatible card [http://www.axtrom.com/ Axtrom] which works great with linux. So far kaffeine is the best choice to use with a budget card. Since xine does not let you to record and it's interface is buggy and [[VDR]] is very hard to setup and startup I decided to stick to kaffeine. It lets you record un-attended. you can even record and watch multiple channels within same transponder.<br />
<br />
---<br />
<br />
==== DVB-T example ====<br />
Location: Hampshire, UK<br />
<br />
Device: [http://www.hauppauge.co.uk/pages/products/data_novatstick.html Nova-T stick]<br />
<br />
Hardware: Via SP13000 epia system<br />
<br />
OS: Fedora Core 6<br />
<br />
kernel: 2.6.18-1.2869.fc6<br />
<br />
Drivers: extracted from hg<br />
<br />
Works reasonably well, records about 8 TV programs a day using freevo. Get kernel ops requiring reboot about once a month, can be slow to tune and sometimes doesn't tune at all. Wouldn't recommend this device if you are looking for a hastle free solution ;) Also worth noting that I can only watch live TV with mplayer / xine, and record using mplayer. Things like dvbstreamer don't work with this stick, I just get mt2060 errors to syslog and no data.<br />
<br />
==== Another DVB-T example ====<br />
<br />
Location: Sydney, Australia<br />
<br />
Devices: 2 x LifeView TV Walker Twin<br />
<br />
Distribution: Debian<br />
<br />
Kernel: 2.6.20<br />
<br />
Drivers: from http://linuxtv.org/hg/~aapot/m920x<br />
<br />
Software: kaffeine<br />
<br />
Works fine playing and recording. It should be possible to play/record up to 4 channels simultaneously with this setup. Tuning a new channel takes 1-2 seconds.<br />
<br />
== A sample solution for a system with a full-featured card ==<br />
<br />
'''DVB-C example'''<BR><br />
My system is a MythTV pc installed with Fedora Core 6 following [http://www.wilsonet.com/mythtv/fcmyth.php this howto]. I use the [[TechnoTrend Premium C-2300]] hybrid [[DVB-C]] card, which I bought from [http://www.dvbshop.net/index.php/cat/c17_Premium-PCI.html Dvbshop] in Germany. I was thinking buying the [[TechnoTrend Budget C-1500]], but it was out of stock from [http://www.dvbshop.net/product_info.php/info/p16_Technotrend-Budget-C-1500-incl--Remote--W98-ME-2K-XP-MCE-.html Dvbshop] at that time. I am going to document in the [http://www.mythtv.org/wiki/index.php/Adding_Digital_Cable_Channels_For_DVB-C_Tuner_Cards_--_Norway MythTV Wiki] how to use the [[Norway - Grimstad]] channels.conf file for setting up channels in MythTV. Also see, the [[Use_cases#Grimstad_Cable_TV_.5B1.5D|Grimstad Cable TV use example]].<br />
<br />
== A sample solution for a system with an analog card ==<br />
''requires an example description''<br />
<br />
<br />
== Also See:==<br />
* [[Testing your DVB device]]<br />
* [[Commented software list]]</div>Haraldovhttps://www.linuxtv.org/wiki/index.php?title=Testing_your_DVB_device&diff=9677Testing your DVB device2007-05-04T17:39:54Z<p>Haraldov: </p>
<hr />
<div>This page provides a few suggestions on how to test that a DVB card installed on your system is functioning properly. It won't tell you how to install the specific hardware that you have (see [[How to install DVB device drivers]] for some generic instructions). Nor does this page describe the use of feature rich viewing software. But it will describe to you some steps on the command line that are indispensable for quick setup and viewing with DVB hardware.<br />
<br />
Again, '''this article assumes that you have already physically installed the device into your system, and have also installed the driver for your hardware and have the proper modules loaded''' i.e. you should at least have a ''/dev/dvb/adapter0/'' directory. Additional DVB devices installed on your system will be assigned an increased ''adapter'' number accordingly.<br />
<br />
== Using dvb-apps ==<br />
<br />
'''1. Obtain the dvb-apps package'''<BR><br />
See the [[LinuxTV dvb-apps]] article for details on how to obtain the package. The dvb-apps package contains several useful tools. <br />
<br />
'''2. Scan for the channels you can receive''' <BR> <br />
Refer to the [[Scan|scan]] article for details of how to perform this step. Once familiar with that content, you will recognize that a general form summary of this step is given by: <br />
<br />
mkdir ~/.{a,c,s,t}zap<br />
dvbscan /path_to_the_initial_channel_file > ./{a,c,s,t}zap/channels.conf<br />
<br />
'''3. Tune a frequncy and program'''<BR><br />
Use the command [[tzap]] for [[DVB-T]], [[czap]] for [[DVB-C]], [[szap]] for [[DVB-S]] and [[azap]] with [[ATSC]]. <br />
<br />
As an example, to automatically tune both channel and [[PID|PIDs]] for video and audio to the channel called "KPAX-DT" produced in the ATSC scan output above, run:<br />
$ /usr/bin/azap -r -c ~/.azap/channels.conf "KPAX-DT"<br />
<br />
The output of that azap command would be something like:<br />
using '/dev/dvb/adapter0/frontend0' and '/dev/dvb/adapter0/demux0'<br />
tuning to 177028615 Hz<br />
video pid 0x0031, audio pid 0x0034<br />
status 00 | signal edc0 | snr a122 | ber 00000000 | unc 000000ff |<br />
status 1f | signal 0000 | snr ff28 | ber 00000000 | unc 00000000 | FE_HAS_LOCK<br />
...(repeated updated output) ...<br />
Note: The output will continue to update endlessly, but you can terminate it with Ctrl C<br />
<br />
Not all the numbers are implemented in some drivers, but good is signal > 8000, status 1f (all bits set), snr (Signal to Noise Ratio) should be > 8000, ber (bit error rate) - low is good, unc (Uncorrectable blocks) - low is good. <br />
<br />
Then you can try to tune in one of the channels:<br />
<br />
<br />
$ /usr/bin/azap -r -c ~/.azap/channels.conf "KPAX-DT"<br />
which in turn displays lines similar to (terminate with Ctrl-C)<br />
<br />
using '/dev/dvb/adapter0/frontend0' and '/dev/dvb/adapter0/demux0'<br />
tuning to 177028615 Hz<br />
status 1f | signal 0000 | snr ff28 | ber 00000000 | unc 00000000 | FE_HAS_LOCK<br />
... (repeated output) ...<br />
<br />
<br />
'''4. After you've tuned a frequency and program'''<BR><br />
<br />
You could now start up your TV watching application or datastreamer. <br />
<br />
Or, alternatively, you may want to see some statistics of what's coming in for each channel and PID.<br />
Example: <br />
dvbtraffic<br />
And finally <br />
dvbdata<br />
<br />
Then for some statistics, try<br />
$ /usr/bin/dvbtraffic<br />
<br />
<br />
== First steps using dvbsnoop ==<br />
As an alternative, [[dvbsnoop]] is a small, down-to-earth util. As it's very hardware-near, it's very handy for debugging and seeing what's going on with the card (tuning works? data coming in? signal strong enough?). (On the other side, if all in the section above works fine, you can jump over this section here.)<br />
Install it, e.g. with debian: <br />
# apt-get install dvbsnoop<br />
Apparently, dvbsnoop isn't in any of the usual Fedora repositories at this time (Feb 2007). Instead, download a copy directly from the source forge site using steps similar to the following. Note this is for version 1.40. Your download URL (and the extracted directory ''dvbsnoop-bin-i386-1.4.00-api3'') will change as succeeding versions of dvbsnoop are published on Source Forge. Also you may wish to copy the binary ''dvbsnoop'' out to a more convenient directory in your path, rather than the deeply buried directory ''~/dvbsnoop/dvbsnoop-bin-i386-1.4.00-api3/bin-i386-api3'' which, in this example, contains the binary. Then ''./dvbsnoop'' will not be required, just ''dvbsnoop'' as shown in the debian example below.<br />
$ mkdir ~/dvbsnoop<br />
$ cd dvbsnoop<br />
$ wget http://downloads.sourceforge.net/dvbsnoop/dvbsnoop-bin-i386-1.4.00-api3.tar.gz?modtime=1124046233&big_mirror=0<br />
$ tar xvzf *.tar.gz<br />
$ ls<br />
$ cd dvbsnoop-bin-i386-1.4.00-api3<br />
$ ls <br />
$ cd bin-i386-api3<br />
$ ls<br />
$ ./dvbsnoop -help<br />
$ ./dvbsnoop -s pidscan<br />
<br />
Then try things like<br />
dvbsnoop -help<br />
dvbsnoop -s pidscan<br />
This will give out a lot of numbers, but if you understand the system of [[DVB]] you should see if they make sense. Go for one of the PIDs (choose a right one which is a bit difficult as you don't know what they stand for unless you used the scan line above) and try: <br />
dvbsnoop -s bandwidth <PID><br />
dvbsnoop <PID><br />
The latter will spit out a lot of hexdumps - at least you receive '''something''' ;-)<br />
<br />
== Save a TV program to harddisk with dvbstream ==<br />
The handy thing about digital TV is, it comes in as a digital stream that you can save right away to your harddisk without any changes necessary to it. Therefore, hardly any CPU resources are needed -- just a lot of HD space (few GB per hour as the stream is MPEG-2 which is not as compressed as for example DivX/MPEG-4). A good program that can do that (and more) is [[dvbstream]]. <br />
<br />
Install it, e.g. with debian: <br />
# apt-get install dvbstream<br />
<br />
Let's tune into a channel with tzap as described above, and then you can just save the stream into a file like this: <br />
tzap BBC ONE<br />
dvbstream 600 601 -o >BBC1.mpeg<br />
So this is why it's important that you have your personal channels.conf file with all the PIDs so you can look them up. Instead of using tzap you can do it all in one - tune the frequency and select the right PIDs:<br />
dvbstream -f 578000 600 601 -o >bbc1.mpeg<br />
<br />
Wait a few seconds and then press Ctrl+C to stop. You can open the MPEG file with players that play movie files (decode MPEG2), like Mplayer, (g)xine or noatune. <br />
<br />
If the file is rather small, e.g. smaller than 1 MB after a minute of recording, then you can't receive this TV channel - maybe the reception is bad (too weak antenna signal) - or maybe your card's frequency is not tuned for the right sender? Watch out, some PIDs come up a few times (but for different frequencies). <br />
<br />
This might not be what you wanna do every day (unless you only watch BBC1 or you can easily memorise all your channels with their two PIDs) - but it's very fast and easy to do these steps, e.g. for a test.<br />
<br />
<br />
==More Software - next steps ==<br />
You have a lot of choice. [[MPlayer]], [[Xine]], [[Kaffeine]] , [[Klear]] are probably the first choices selected for light TV watching with a DVB card. <br />
<br />
Alternatively, you could use [[dvbstream]] and then watch the MPEG-2 stream (even possible on a different computer) with programs like Xine, MPlayer etc.<br />
<br />
For "Media Center" type applications, the usual first suspects are [[Freevo]], [[MythTV]], and [[VDR]] (note: you'll need to install the [[VDR Software Decoder Plugin]] if you want to use VDR for watching with a software decoding card). <br />
<br />
<br />
== Also See ==<br />
* [[Example setups]] for inspiration on what's possible with more advanced software usage<br />
* [[Commented software list]]<br />
* Digital Video Broadcasting – A practical guide by Hugo Mills [http://www.carfax.org.uk/docs/DVB/]</div>Haraldovhttps://www.linuxtv.org/wiki/index.php?title=Example_setups&diff=9239Example setups2007-04-11T10:57:25Z<p>Haraldov: </p>
<hr />
<div>This page lists '''example software configurations''' that you might find helpful as a suggestion of what you can do with your system. <br />
<br />
''For a complete list of programs, see the [[commented software list]] page --- here, you'll find solutions, not just simple programs. For testing purposed or small systems, have a look at the [[First steps with a budget DVB card]].''<br />
<br />
In order to be most useful for the reader, this page is diveded into three sections: <br />
* setups for [[full featured card]]s (DVB cards with hardware decoders)<br />
* setups for [[budget]] cards (DVB cards without hardware decoders) -- see here for USB DVB adapters<br />
* setups for analog TV cards (hey, shouldn't that sort of stuff rather be in the [http://linuxtv.org/v4lwiki/ video4linux wiki]?<br />
<br />
<br />
== A sample solution for a system with a budget DVB card ==<br />
My system is a [[Twinhan DTV Mini Ter]] on a cheap HP Pentium 4 1.2GHz. The graphic card is only an on-board Intel 82810E with shared memory, so nothing fancy. <br />
<br />
After installing the card drivers, I tried several solutions. I didn't get the [[VDR Software Decoder Plugin]] working so I tried [[xine]] -- which worked on the first trial and provides much functionality (for watching) on an easy and intuitive interface. <br />
<br />
<br />
== A sample solution for a system with a full-featured card ==<br />
My system is a Mythtv pc installed with Fedora Core 6 following this howto [http://www.wilsonet.com/mythtv/fcmyth.php]. I use the Technotrend Premium DVB-C 2300 Hybrid dvb-c card<br />
[http://www.linuxtv.org/wiki/index.php/Use_cases#Grimstad_Cable_TV_.5B1.5D]bought from Dvb shop in Germany [http://www.dvbshop.net/index.php/cat/c17_Premium-PCI.html]. I was thinking buying the Technotrend Budget C-1500, but it was out of stock from Dvbshop that time [http://www.dvbshop.net/product_info.php/info/p16_Technotrend-Budget-C-1500-incl--Remote--W98-ME-2K-XP-MCE-.html].<br />
<br />
The Linux 2.6 kernel had already support for Technotrend Premium DVB-C 2300 so the card was autodetected after first time boot. The firmware for the card was not in place so you must download the correct dvb-ttpci-01.fw-2622 (or newer) firmware file from this place [http://www.linuxtv.org/downloads/firmware/]. Place this file in the hotplug directory /lib/firmware and rename to dvb-ttpci-01.fw. Change the permission on the file. After a reboot you should get some file in /dev/dvb/adapter0/<br />
<br />
Using Fedora, assume root privileges then install the dvb utilities with<br />
# yum install dvb-apps<br />
<br />
Scan will need some idea of where to start searching; for this reasons it takes a file for your location as a starting point. Therefore, you need to find channel information for your locality. Again, the location where they are installed may vary. In the following examples, the directory is /usr/share/doc/dvb-utils/examples/scan/dvb-t/; other installations also use /usr/share/doc/dvb-apps-1.1.1 or /usr/local/share/dvb/scan/dvb-t/. DVB-S users should use the folders /usr/share/doc/dvb-utils/examples/scan/dvb-s/, /usr/share/doc/dvb-apps-1.1.1 or /usr/local/share/dvb/scan/dvb-s/. In each case, the name of the file you're looking for is of the form cc-Ttttt, where cc is a two-letter country abbreviation, and Ttttt is the name of the location of the transmitter. So in Adelaide, Australia, you'd look for a file called au-Adelaide; the following example relates to Oxford in the United Kingdom.<br />
<br />
I live in Norway and use Grimstad cabeltv. I did not find any channel information file I could use. But I find one for Norwegian UPC which I first take a copy of and then edited it. I got the correct frequency setting, QAM and so on from the cable box Grimstad cabeltv has delivered me. <br />
<br />
[mythtv@mythpc ~]$ cat no-oslo-UPC<br />
# no-oslo-UPC (cable)<br />
C 410000000 6875000 NONE QAM64<br />
C 418000000 6875000 NONE QAM64<br />
C 426000000 6875000 NONE QAM64<br />
C 442000000 6875000 NONE QAM64<br />
C 450000000 6875000 NONE QAM64<br />
C 458000000 6875000 NONE QAM64<br />
C 466000000 6875000 NONE QAM64<br />
C 474000000 6875000 NONE QAM64<br />
C 482000000 6875000 NONE QAM64<br />
C 490000000 6875000 NONE QAM64<br />
C 498000000 6875000 NONE QAM64 <br />
<br />
After I have edited the file no-oslo-UPC I did a scan. <br />
<br />
$ /usr/bin/dvbscan /home/mythtv/no-oslo-UPC<br />
<br />
This should produce output saying "WARNING: >>> tuning failed!!!" if a signal was not found on that particular frequency. Eventually, a list of services found should be displayed. Here is a sample list:<br />
<br />
dumping lists (7 services)<br />
NRK mP3:410000000:INVERSION_AUTO:6875000:FEC_NONE:QAM_64:0:706:1515<br />
NRK Stortinget:410000000:INVERSION_AUTO:6875000:FEC_NONE:QAM_64:0:705:1514<br />
NRK Sami Radio:410000000:INVERSION_AUTO:6875000:FEC_NONE:QAM_64:0:49:1510<br />
NRK2:410000000:INVERSION_AUTO:6875000:FEC_NONE:QAM_64:525:47:1502<br />
NRK Klassisk:410000000:INVERSION_AUTO:6875000:FEC_NONE:QAM_64:0:703:1507<br />
NRK P3:410000000:INVERSION_AUTO:6875000:FEC_NONE:QAM_64:0:702:1505<br />
NRK P2:410000000:INVERSION_AUTO:6875000:FEC_NONE:QAM_64:0:701:1504<br />
NRK P1:410000000:INVERSION_AUTO:6875000:FEC_NONE:QAM_64:0:35:1503<br />
NRK1 sorlandet:410000000:INVERSION_AUTO:6875000:FEC_NONE:QAM_64:512:640:3507<br />
ZTV Norway:410000000:INVERSION_AUTO:6875000:FEC_NONE:QAM_64:2161:2162:2160<br />
TV3 Norge:410000000:INVERSION_AUTO:6875000:FEC_NONE:QAM_64:1111:1112:1110<br />
<br />
This is a list with both radio and tv channels. You have both encrypted and unencrypted channels her also.<br />
<br />
Next try to create a "channels.conf", a file in a hidden (dotted) directory off your "home" directory. I make a directory called .czap because I shall use czap to tune in the channels. Czap is only for cable broadcasting, then you have tzap for terrestial and then szap for satelite.<br />
<br />
$ mkdir ~/.czap<br />
$ /usr/bin/dvbscan /home/mythtv/no-oslo-UPC > ~/.czap/channels.conf<br />
<br />
Next display the contents of the channels.conf file to make sure the file creation proceeded correctly<br />
$ cat ~/.czap/channels.conf<br />
<br />
Then you can try to tune in one of the channels:<br />
<br />
$ /usr/bin/czap -r -c ~/.czap/channels.conf "ZTV Norway"<br />
which in turn displays lines similar to (terminate with Ctrl-C)<br />
<br />
using '/dev/dvb/adapter0/frontend0' and '/dev/dvb/adapter0/demux0'<br />
tuning to 177028615 Hz<br />
status 1f | signal 0000 | snr ff28 | ber 00000000 | unc 00000000 | FE_HAS_LOCK<br />
... (repeated output) ...<br />
<br />
The rest of the wiki I am going to document in the Mythtv Wiki[http://www.mythtv.org/wiki/index.php/Main_Page] because it is involving the howto use the channels.conf file in Mythtv for setting up channels in Mythtv. <br />
<br />
== A sample solution for a system with an analog card ==<br />
''write it down if you have one -- I can't do it cause I haven't''<br />
<br />
<br />
== See also ==<br />
* [[Commented software list]] <br />
* [[First steps with a budget DVB card]]</div>Haraldovhttps://www.linuxtv.org/wiki/index.php?title=Example_setups&diff=9238Example setups2007-04-11T10:56:28Z<p>Haraldov: </p>
<hr />
<div>This page lists '''example software configurations''' that you might find helpful as a suggestion of what you can do with your system. <br />
<br />
''For a complete list of programs, see the [[commented software list]] page --- here, you'll find solutions, not just simple programs. For testing purposed or small systems, have a look at the [[First steps with a budget DVB card]].''<br />
<br />
In order to be most useful for the reader, this page is diveded into three sections: <br />
* setups for [[full featured card]]s (DVB cards with hardware decoders)<br />
* setups for [[budget]] cards (DVB cards without hardware decoders) -- see here for USB DVB adapters<br />
* setups for analog TV cards (hey, shouldn't that sort of stuff rather be in the [http://linuxtv.org/v4lwiki/ video4linux wiki]?<br />
<br />
<br />
== A sample solution for a system with a budget DVB card ==<br />
My system is a [[Twinhan DTV Mini Ter]] on a cheap HP Pentium 4 1.2GHz. The graphic card is only an on-board Intel 82810E with shared memory, so nothing fancy. <br />
<br />
After installing the card drivers, I tried several solutions. I didn't get the [[VDR Software Decoder Plugin]] working so I tried [[xine]] -- which worked on the first trial and provides much functionality (for watching) on an easy and intuitive interface. <br />
<br />
<br />
== A sample solution for a system with a full-featured card ==<br />
My system is a Mythtv pc installed with Fedora Core 6 following this howto [http://www.wilsonet.com/mythtv/fcmyth.php]. I use the Technotrend Premium DVB-C 2300 Hybrid dvb-c card<br />
[http://www.linuxtv.org/wiki/index.php/Use_cases#Grimstad_Cable_TV_.5B1.5D]bought from Dvb shop in Germany [http://www.dvbshop.net/index.php/cat/c17_Premium-PCI.html]. I was thinking buying the Technotrend Budget C-1500, but it was out of stock from Dvbshop that time [http://www.dvbshop.net/product_info.php/info/p16_Technotrend-Budget-C-1500-incl--Remote--W98-ME-2K-XP-MCE-.html].<br />
<br />
The Linux 2.6 kernel had already support for Technotrend Premium DVB-C 2300 so the card was autodetected after first time boot. The firmware for the card was not in place so you must download the correct dvb-ttpci-01.fw-2622 (or newer) firmware file from this place [http://www.linuxtv.org/downloads/firmware/]. Place this file in the hotplug directory /lib/firmware and rename to dvb-ttpci-01.fw. Change the permission on the file. After a reboot you should get some file in /dev/dvb/adapter0/<br />
<br />
Using Fedora, assume root privileges then install the dvb utilities with<br />
# yum install dvb-apps<br />
<br />
Scan will need some idea of where to start searching; for this reasons it takes a file for your location as a starting point. Therefore, you need to find channel information for your locality. Again, the location where they are installed may vary. In the following examples, the directory is /usr/share/doc/dvb-utils/examples/scan/dvb-t/; other installations also use /usr/share/doc/dvb-apps-1.1.1 or /usr/local/share/dvb/scan/dvb-t/. DVB-S users should use the folders /usr/share/doc/dvb-utils/examples/scan/dvb-s/, /usr/share/doc/dvb-apps-1.1.1 or /usr/local/share/dvb/scan/dvb-s/. In each case, the name of the file you're looking for is of the form cc-Ttttt, where cc is a two-letter country abbreviation, and Ttttt is the name of the location of the transmitter. So in Adelaide, Australia, you'd look for a file called au-Adelaide; the following example relates to Oxford in the United Kingdom.<br />
<br />
I live in Norway and use Grimstad cabeltv. I did not find any channel information file I could use. But I find one for Norwegian UPC which I first take a copy of and then edited it. I got the correct frequency setting, QAM and so on from the cable box Grimstad cabeltv has delivered me. <br />
<br />
[mythtv@mythpc ~]$ cat no-oslo-UPC<br />
# no-oslo-UPC (cable)<br />
C 410000000 6875000 NONE QAM64<br />
C 418000000 6875000 NONE QAM64<br />
C 426000000 6875000 NONE QAM64<br />
C 442000000 6875000 NONE QAM64<br />
C 450000000 6875000 NONE QAM64<br />
C 458000000 6875000 NONE QAM64<br />
C 466000000 6875000 NONE QAM64<br />
C 474000000 6875000 NONE QAM64<br />
C 482000000 6875000 NONE QAM64<br />
C 490000000 6875000 NONE QAM64<br />
C 498000000 6875000 NONE QAM64 <br />
<br />
After I have edited the file no-oslo-UPC I did a scan. <br />
<br />
$ /usr/bin/dvbscan /home/mythtv/no-oslo-UPC<br />
<br />
This should produce output saying "WARNING: >>> tuning failed!!!" if a signal was not found on that particular frequency. Eventually, a list of services found should be displayed. Here is a sample list:<br />
<br />
dumping lists (7 services)<br />
NRK mP3:410000000:INVERSION_AUTO:6875000:FEC_NONE:QAM_64:0:706:1515<br />
NRK Stortinget:410000000:INVERSION_AUTO:6875000:FEC_NONE:QAM_64:0:705:1514<br />
NRK Sami Radio:410000000:INVERSION_AUTO:6875000:FEC_NONE:QAM_64:0:49:1510<br />
NRK2:410000000:INVERSION_AUTO:6875000:FEC_NONE:QAM_64:525:47:1502<br />
NRK Klassisk:410000000:INVERSION_AUTO:6875000:FEC_NONE:QAM_64:0:703:1507<br />
NRK P3:410000000:INVERSION_AUTO:6875000:FEC_NONE:QAM_64:0:702:1505<br />
NRK P2:410000000:INVERSION_AUTO:6875000:FEC_NONE:QAM_64:0:701:1504<br />
NRK P1:410000000:INVERSION_AUTO:6875000:FEC_NONE:QAM_64:0:35:1503<br />
NRK1 sorlandet:410000000:INVERSION_AUTO:6875000:FEC_NONE:QAM_64:512:640:3507<br />
ZTV Norway:410000000:INVERSION_AUTO:6875000:FEC_NONE:QAM_64:2161:2162:2160<br />
TV3 Norge:410000000:INVERSION_AUTO:6875000:FEC_NONE:QAM_64:1111:1112:1110<br />
<br />
This is a list with both radio and tv channels. You have both encrypted and unencrypted channels her also.<br />
<br />
Next try to create a "channels.conf", a file in a hidden (dotted) directory off your "home" directory. I make a directory called .czap because I shall use czap to tune in the channels. Czap is only for cable broadcasting, then you have tzap for terrestial and then szap for satelite.<br />
<br />
$ mkdir ~/.czap<br />
$ /usr/bin/dvbscan /home/mythtv/no-oslo-UPC > ~/.czap/channels.conf<br />
<br />
Next display the contents of the channels.conf file to make sure the file creation proceeded correctly<br />
$ cat ~/.czap/channels.conf<br />
<br />
Then you can try to tune in one of the channels:<br />
<br />
$ /usr/bin/czap -r -c ~/.czap/channels.conf "ZTV Norway"<br />
which in turn displays lines similar to (terminate with Ctrl-C)<br />
<br />
using '/dev/dvb/adapter0/frontend0' and '/dev/dvb/adapter0/demux0'<br />
tuning to 177028615 Hz<br />
status 1f | signal 0000 | snr ff28 | ber 00000000 | unc 00000000 | FE_HAS_LOCK<br />
... (repeated output) ...<br />
<br />
The rest of the wiki I am going to document in the Mythtv Wiki[http://www.mythtv.org/wiki/index.php/Main_Page] because it is involving the howto use the channels.conf file in Mythtv for setting up channels in Mythtv. <br />
<br />
(The budget setup above of course also works for FF cards.)<br />
<br />
== A sample solution for a system with an analog card ==<br />
''write it down if you have one -- I can't do it cause I haven't''<br />
<br />
<br />
== See also ==<br />
* [[Commented software list]] <br />
* [[First steps with a budget DVB card]]</div>Haraldovhttps://www.linuxtv.org/wiki/index.php?title=Example_setups&diff=9237Example setups2007-04-11T10:50:11Z<p>Haraldov: </p>
<hr />
<div>This page lists '''example software configurations''' that you might find helpful as a suggestion of what you can do with your system. <br />
<br />
''For a complete list of programs, see the [[commented software list]] page --- here, you'll find solutions, not just simple programs. For testing purposed or small systems, have a look at the [[First steps with a budget DVB card]].''<br />
<br />
In order to be most useful for the reader, this page is diveded into three sections: <br />
* setups for [[full featured card]]s (DVB cards with hardware decoders)<br />
* setups for [[budget]] cards (DVB cards without hardware decoders) -- see here for USB DVB adapters<br />
* setups for analog TV cards (hey, shouldn't that sort of stuff rather be in the [http://linuxtv.org/v4lwiki/ video4linux wiki]?<br />
<br />
<br />
== A sample solution for a system with a budget DVB card ==<br />
My system is a [[Twinhan DTV Mini Ter]] on a cheap HP Pentium 4 1.2GHz. The graphic card is only an on-board Intel 82810E with shared memory, so nothing fancy. <br />
<br />
After installing the card drivers, I tried several solutions. I didn't get the [[VDR Software Decoder Plugin]] working so I tried [[xine]] -- which worked on the first trial and provides much functionality (for watching) on an easy and intuitive interface. <br />
<br />
<br />
== A sample solution for a system with a full-featured card ==<br />
My system is a Mythtv pc installed with Fedora Core 6 following this howto [http://www.wilsonet.com/mythtv/fcmyth.php]. I use the Technotrend Premium DVB-C 2300 Hybrid dvb-c card<br />
[http://www.linuxtv.org/wiki/index.php/Use_cases#Grimstad_Cable_TV_.5B1.5D]bought from Dvb shop in Germany [http://www.dvbshop.net/index.php/cat/c17_Premium-PCI.html]. I was thinking buying the Technotrend Budget C-1500, but it was out of stock from Dvbshop that time [http://www.dvbshop.net/product_info.php/info/p16_Technotrend-Budget-C-1500-incl--Remote--W98-ME-2K-XP-MCE-.html].<br />
<br />
The Linux 2.6 kernel had already support for Technotrend Premium DVB-C 2300 so the card was autodetected after first time boot. The firmware for the card was not in place so you must download the correct dvb-ttpci-01.fw-2622 (or newer) firmware file from this place [http://www.linuxtv.org/downloads/firmware/]. Place this file in the hotplug directory /lib/firmware and rename to dvb-ttpci-01.fw. Change the permission on the file. After a reboot you should get some file in /dev/dvb/adapter0/<br />
<br />
Using Fedora, assume root privileges then install the dvb utilities with<br />
# yum install dvb-apps<br />
<br />
Scan will need some idea of where to start searching; for this reasons it takes a file for your location as a starting point. Therefore, you need to find channel information for your locality. Again, the location where they are installed may vary. In the following examples, the directory is /usr/share/doc/dvb-utils/examples/scan/dvb-t/; other installations also use /usr/share/doc/dvb-apps-1.1.1 or /usr/local/share/dvb/scan/dvb-t/. DVB-S users should use the folders /usr/share/doc/dvb-utils/examples/scan/dvb-s/, /usr/share/doc/dvb-apps-1.1.1 or /usr/local/share/dvb/scan/dvb-s/. In each case, the name of the file you're looking for is of the form cc-Ttttt, where cc is a two-letter country abbreviation, and Ttttt is the name of the location of the transmitter. So in Adelaide, Australia, you'd look for a file called au-Adelaide; the following example relates to Oxford in the United Kingdom.<br />
<br />
I live in Norway and use Grimstad cabeltv. I did not find any channel information file I could use. But I find one for Norwegian UPC which I first take a copy of and then edited it. I got the correct frequency setting, QAM and so on from the cable box Grimstad cabeltv has delivered me. <br />
<br />
[mythtv@mythpc ~]$ cat no-oslo-UPC<br />
# no-oslo-UPC (cable)<br />
C 410000000 6875000 NONE QAM64<br />
C 418000000 6875000 NONE QAM64<br />
C 426000000 6875000 NONE QAM64<br />
C 442000000 6875000 NONE QAM64<br />
C 450000000 6875000 NONE QAM64<br />
C 458000000 6875000 NONE QAM64<br />
C 466000000 6875000 NONE QAM64<br />
C 474000000 6875000 NONE QAM64<br />
C 482000000 6875000 NONE QAM64<br />
C 490000000 6875000 NONE QAM64<br />
C 498000000 6875000 NONE QAM64 <br />
<br />
After I have edited the file no-oslo-UPC I did a scan. <br />
<br />
$ /usr/bin/dvbscan /home/mythtv/no-oslo-UPC<br />
<br />
This should produce output saying "WARNING: >>> tuning failed!!!" if a signal was not found on that particular frequency. Eventually, a list of services found should be displayed. Here is a sample list:<br />
<br />
dumping lists (7 services)<br />
NRK mP3:410000000:INVERSION_AUTO:6875000:FEC_NONE:QAM_64:0:706:1515<br />
NRK Stortinget:410000000:INVERSION_AUTO:6875000:FEC_NONE:QAM_64:0:705:1514<br />
NRK Sami Radio:410000000:INVERSION_AUTO:6875000:FEC_NONE:QAM_64:0:49:1510<br />
NRK2:410000000:INVERSION_AUTO:6875000:FEC_NONE:QAM_64:525:47:1502<br />
NRK Klassisk:410000000:INVERSION_AUTO:6875000:FEC_NONE:QAM_64:0:703:1507<br />
NRK P3:410000000:INVERSION_AUTO:6875000:FEC_NONE:QAM_64:0:702:1505<br />
NRK P2:410000000:INVERSION_AUTO:6875000:FEC_NONE:QAM_64:0:701:1504<br />
NRK P1:410000000:INVERSION_AUTO:6875000:FEC_NONE:QAM_64:0:35:1503<br />
NRK1 sorlandet:410000000:INVERSION_AUTO:6875000:FEC_NONE:QAM_64:512:640:3507<br />
ZTV Norway:410000000:INVERSION_AUTO:6875000:FEC_NONE:QAM_64:2161:2162:2160<br />
TV3 Norge:410000000:INVERSION_AUTO:6875000:FEC_NONE:QAM_64:1111:1112:1110<br />
<br />
This is a list with both radio and tv channels. You have both encrypted and unencrypted channels her also.<br />
<br />
Next try to create a "channels.conf", a file in a hidden (dotted) directory off your "home" directory. I make a directory called .czap because I shall use czap to tune in the channels. Czap is only for cable broadcasting, then you have tzap for terrestial and then szap for satelite.<br />
<br />
$ mkdir ~/.czap<br />
$ /usr/bin/dvbscan /home/mythtv/no-oslo-UPC > ~/.czap/channels.conf<br />
<br />
Next display the contents of the channels.conf file to make sure the file creation proceeded correctly<br />
$ cat ~/.czap/channels.conf<br />
<br />
Then you can try to tune in one of the channels:<br />
<br />
$ /usr/bin/czap -r -c ~/.czap/channels.conf "ZTV Norway"<br />
which in turn displays lines similar to (terminate with Ctrl-C)<br />
<br />
using '/dev/dvb/adapter0/frontend0' and '/dev/dvb/adapter0/demux0'<br />
tuning to 177028615 Hz<br />
status 1f | signal 0000 | snr ff28 | ber 00000000 | unc 00000000 | FE_HAS_LOCK<br />
... (repeated output) ...<br />
<br />
(The budget setup above of course also works for FF cards.)<br />
<br />
== A sample solution for a system with an analog card ==<br />
''write it down if you have one -- I can't do it cause I haven't''<br />
<br />
<br />
== See also ==<br />
* [[Commented software list]] <br />
* [[First steps with a budget DVB card]]</div>Haraldovhttps://www.linuxtv.org/wiki/index.php?title=Example_setups&diff=9236Example setups2007-04-11T10:45:27Z<p>Haraldov: </p>
<hr />
<div>This page lists '''example software configurations''' that you might find helpful as a suggestion of what you can do with your system. <br />
<br />
''For a complete list of programs, see the [[commented software list]] page --- here, you'll find solutions, not just simple programs. For testing purposed or small systems, have a look at the [[First steps with a budget DVB card]].''<br />
<br />
In order to be most useful for the reader, this page is diveded into three sections: <br />
* setups for [[full featured card]]s (DVB cards with hardware decoders)<br />
* setups for [[budget]] cards (DVB cards without hardware decoders) -- see here for USB DVB adapters<br />
* setups for analog TV cards (hey, shouldn't that sort of stuff rather be in the [http://linuxtv.org/v4lwiki/ video4linux wiki]?<br />
<br />
<br />
== A sample solution for a system with a budget DVB card ==<br />
My system is a [[Twinhan DTV Mini Ter]] on a cheap HP Pentium 4 1.2GHz. The graphic card is only an on-board Intel 82810E with shared memory, so nothing fancy. <br />
<br />
After installing the card drivers, I tried several solutions. I didn't get the [[VDR Software Decoder Plugin]] working so I tried [[xine]] -- which worked on the first trial and provides much functionality (for watching) on an easy and intuitive interface. <br />
<br />
<br />
== A sample solution for a system with a full-featured card ==<br />
My system is a Mythtv pc installed with Fedora Core 6 following this howto [http://www.wilsonet.com/mythtv/fcmyth.php]. I use the Technotrend Premium DVB-C 2300 Hybrid dvb-c card<br />
[http://www.linuxtv.org/wiki/index.php/Use_cases#Grimstad_Cable_TV_.5B1.5D]bought from Dvb shop in Germany [http://www.dvbshop.net/index.php/cat/c17_Premium-PCI.html]. I was thinking buying the Technotrend Budget C-1500, but it was out of stock from Dvbshop that time [http://www.dvbshop.net/product_info.php/info/p16_Technotrend-Budget-C-1500-incl--Remote--W98-ME-2K-XP-MCE-.html].<br />
<br />
The Linux 2.6 kernel had already support for Technotrend Premium DVB-C 2300 so the card was autodetected after first time boot. The firmware for the card was not in place so you must download the correct dvb-ttpci-01.fw-2622 (or newer) firmware file from this place [http://www.linuxtv.org/downloads/firmware/]. Place this file in the hotplug directory /lib/firmware and rename to dvb-ttpci-01.fw. Change the permission on the file. After a reboot you should get some file in /dev/dvb/adapter0/<br />
<br />
Using Fedora, assume root privileges then install the dvb utilities with<br />
# yum install dvb-apps<br />
<br />
Scan will need some idea of where to start searching; for this reasons it takes a file for your location as a starting point. Therefore, you need to find channel information for your locality. Again, the location where they are installed may vary. In the following examples, the directory is /usr/share/doc/dvb-utils/examples/scan/dvb-t/; other installations also use /usr/share/doc/dvb-apps-1.1.1 or /usr/local/share/dvb/scan/dvb-t/. DVB-S users should use the folders /usr/share/doc/dvb-utils/examples/scan/dvb-s/, /usr/share/doc/dvb-apps-1.1.1 or /usr/local/share/dvb/scan/dvb-s/. In each case, the name of the file you're looking for is of the form cc-Ttttt, where cc is a two-letter country abbreviation, and Ttttt is the name of the location of the transmitter. So in Adelaide, Australia, you'd look for a file called au-Adelaide; the following example relates to Oxford in the United Kingdom.<br />
<br />
I live in Norway and use Grimstad cabeltv. I did not find any channel information file I could use. But I find one for Norwegian UPC which I first take a copy of and then edited it. I got the correct frequency setting, QAM and so on from the cable box Grimstad cabeltv has delivered me. <br />
<br />
[mythtv@mythpc ~]$ cat no-oslo-UPC<br />
# no-oslo-UPC (cable)<br />
C 410000000 6875000 NONE QAM64<br />
C 418000000 6875000 NONE QAM64<br />
C 426000000 6875000 NONE QAM64<br />
C 442000000 6875000 NONE QAM64<br />
C 450000000 6875000 NONE QAM64<br />
C 458000000 6875000 NONE QAM64<br />
C 466000000 6875000 NONE QAM64<br />
C 474000000 6875000 NONE QAM64<br />
C 482000000 6875000 NONE QAM64<br />
C 490000000 6875000 NONE QAM64<br />
C 498000000 6875000 NONE QAM64 <br />
<br />
After I have edited the file no-oslo-UPC I did a scan. <br />
<br />
$ /usr/bin/dvbscan /home/mythtv/no-oslo-UPC<br />
<br />
This should produce output saying "WARNING: >>> tuning failed!!!" if a signal was not found on that particular frequency. Eventually, a list of services found should be displayed. Here is a sample list:<br />
<br />
dumping lists (7 services)<br />
NRK mP3:410000000:INVERSION_AUTO:6875000:FEC_NONE:QAM_64:0:706:1515<br />
NRK Stortinget:410000000:INVERSION_AUTO:6875000:FEC_NONE:QAM_64:0:705:1514<br />
NRK Sami Radio:410000000:INVERSION_AUTO:6875000:FEC_NONE:QAM_64:0:49:1510<br />
NRK2:410000000:INVERSION_AUTO:6875000:FEC_NONE:QAM_64:525:47:1502<br />
NRK Klassisk:410000000:INVERSION_AUTO:6875000:FEC_NONE:QAM_64:0:703:1507<br />
NRK P3:410000000:INVERSION_AUTO:6875000:FEC_NONE:QAM_64:0:702:1505<br />
NRK P2:410000000:INVERSION_AUTO:6875000:FEC_NONE:QAM_64:0:701:1504<br />
NRK P1:410000000:INVERSION_AUTO:6875000:FEC_NONE:QAM_64:0:35:1503<br />
NRK1 sorlandet:410000000:INVERSION_AUTO:6875000:FEC_NONE:QAM_64:512:640:3507<br />
ZTV Norway:410000000:INVERSION_AUTO:6875000:FEC_NONE:QAM_64:2161:2162:2160<br />
TV3 Norge:410000000:INVERSION_AUTO:6875000:FEC_NONE:QAM_64:1111:1112:1110<br />
<br />
This is a list with both radio and tv channels. You have both encrypted and unencrypted channels her also.<br />
<br />
Next try to create a "channels.conf", a file in a hidden (dotted) directory off your "home" directory. I make a directory called .czap because I shall use czap to tune in the channels.<br />
<br />
$ mkdir ~/.czap<br />
$ /usr/bin/dvbscan /home/mythtv/no-oslo-UPC > ~/.czap/channels.conf<br />
<br />
Next display the contents of the channels.conf file to make sure the file creation proceeded correctly<br />
$ cat ~/.azap/channels.conf<br />
<br />
Note: For reasons not readily apparent, tzap used in the UK example above didn't work. So try azap instead, picking the first entry from ~/.azap/channels.conf (The KPAX-DT part)<br />
$ /usr/bin/azap -r -c ~/.azap/channels.conf "KPAX-DT"<br />
which in turn displays lines similar to (terminate with Ctrl-C)<br />
<br />
using '/dev/dvb/adapter0/frontend0' and '/dev/dvb/adapter0/demux0'<br />
tuning to 177028615 Hz<br />
status 1f | signal 0000 | snr ff28 | ber 00000000 | unc 00000000 | FE_HAS_LOCK<br />
... (repeated output) ...<br />
<br />
Then for some statistics, try<br />
$ /usr/bin/dvbtraffic<br />
<br />
<br />
(The budget setup above of course also works for FF cards.)<br />
<br />
== A sample solution for a system with an analog card ==<br />
''write it down if you have one -- I can't do it cause I haven't''<br />
<br />
<br />
== See also ==<br />
* [[Commented software list]] <br />
* [[First steps with a budget DVB card]]</div>Haraldovhttps://www.linuxtv.org/wiki/index.php?title=Example_setups&diff=9235Example setups2007-04-11T10:38:52Z<p>Haraldov: </p>
<hr />
<div>This page lists '''example software configurations''' that you might find helpful as a suggestion of what you can do with your system. <br />
<br />
''For a complete list of programs, see the [[commented software list]] page --- here, you'll find solutions, not just simple programs. For testing purposed or small systems, have a look at the [[First steps with a budget DVB card]].''<br />
<br />
In order to be most useful for the reader, this page is diveded into three sections: <br />
* setups for [[full featured card]]s (DVB cards with hardware decoders)<br />
* setups for [[budget]] cards (DVB cards without hardware decoders) -- see here for USB DVB adapters<br />
* setups for analog TV cards (hey, shouldn't that sort of stuff rather be in the [http://linuxtv.org/v4lwiki/ video4linux wiki]?<br />
<br />
<br />
== A sample solution for a system with a budget DVB card ==<br />
My system is a [[Twinhan DTV Mini Ter]] on a cheap HP Pentium 4 1.2GHz. The graphic card is only an on-board Intel 82810E with shared memory, so nothing fancy. <br />
<br />
After installing the card drivers, I tried several solutions. I didn't get the [[VDR Software Decoder Plugin]] working so I tried [[xine]] -- which worked on the first trial and provides much functionality (for watching) on an easy and intuitive interface. <br />
<br />
<br />
== A sample solution for a system with a full-featured card ==<br />
My system is a Mythtv pc installed with Fedora Core 6 following this howto [http://www.wilsonet.com/mythtv/fcmyth.php]. I use the Technotrend Premium DVB-C 2300 Hybrid dvb-c card<br />
[http://www.linuxtv.org/wiki/index.php/Use_cases#Grimstad_Cable_TV_.5B1.5D]bought from Dvb shop in Germany [http://www.dvbshop.net/index.php/cat/c17_Premium-PCI.html]. I was thinking buying the Technotrend Budget C-1500, but it was out of stock from Dvbshop that time [http://www.dvbshop.net/product_info.php/info/p16_Technotrend-Budget-C-1500-incl--Remote--W98-ME-2K-XP-MCE-.html].<br />
<br />
The Linux 2.6 kernel had already support for Technotrend Premium DVB-C 2300 so the card was autodetected after first time boot. The firmware for the card was not in place so you must download the correct dvb-ttpci-01.fw-2622 (or newer) firmware file from this place [http://www.linuxtv.org/downloads/firmware/]. Place this file in the hotplug directory /lib/firmware and rename to dvb-ttpci-01.fw. Change the permission on the file. After a reboot you should get some file in /dev/dvb/adapter0/<br />
<br />
Using Fedora, assume root privileges then install the dvb utilities with<br />
# yum install dvb-apps<br />
<br />
Scan will need some idea of where to start searching; for this reasons it takes a file for your location as a starting point. Therefore, you need to find channel information for your locality. Again, the location where they are installed may vary. In the following examples, the directory is /usr/share/doc/dvb-utils/examples/scan/dvb-t/; other installations also use /usr/share/doc/dvb-apps-1.1.1 or /usr/local/share/dvb/scan/dvb-t/. DVB-S users should use the folders /usr/share/doc/dvb-utils/examples/scan/dvb-s/, /usr/share/doc/dvb-apps-1.1.1 or /usr/local/share/dvb/scan/dvb-s/. In each case, the name of the file you're looking for is of the form cc-Ttttt, where cc is a two-letter country abbreviation, and Ttttt is the name of the location of the transmitter. So in Adelaide, Australia, you'd look for a file called au-Adelaide; the following example relates to Oxford in the United Kingdom.<br />
<br />
I live in Norway and use Grimstad cabeltv. I did not find any channel information file I could use. But I find one for Norwegian UPC which I edited. I got the correct frequency setting, QAM and so on from the cable box Grimstad cabeltv has delivered me. <br />
<br />
[mythtv@mythpc ~]$ cat no-oslo-UPC<br />
# no-oslo-UPC (cable)<br />
C 410000000 6875000 NONE QAM64<br />
C 418000000 6875000 NONE QAM64<br />
C 426000000 6875000 NONE QAM64<br />
C 442000000 6875000 NONE QAM64<br />
C 450000000 6875000 NONE QAM64<br />
C 458000000 6875000 NONE QAM64<br />
C 466000000 6875000 NONE QAM64<br />
C 474000000 6875000 NONE QAM64<br />
C 482000000 6875000 NONE QAM64<br />
C 490000000 6875000 NONE QAM64<br />
C 498000000 6875000 NONE QAM64 <br />
<br />
After I have edited the file no-oslo-UPC I did a scan. <br />
<br />
$ /usr/bin/dvbscan /home/mythtv/no-oslo-UPC<br />
<br />
This should produce output saying "WARNING: >>> tuning failed!!!" if a signal was not found on that particular frequency. Eventually, a list of services found should be displayed. Here is a sample list:<br />
<br />
[mythtv@mythpc .czap]$ cat channels.conf.org<br />
NRK mP3:410000000:INVERSION_AUTO:6875000:FEC_NONE:QAM_64:0:706:1515<br />
NRK Stortinget:410000000:INVERSION_AUTO:6875000:FEC_NONE:QAM_64:0:705:1514<br />
NRK Sami Radio:410000000:INVERSION_AUTO:6875000:FEC_NONE:QAM_64:0:49:1510<br />
NRK2:410000000:INVERSION_AUTO:6875000:FEC_NONE:QAM_64:525:47:1502<br />
NRK Klassisk:410000000:INVERSION_AUTO:6875000:FEC_NONE:QAM_64:0:703:1507<br />
NRK P3:410000000:INVERSION_AUTO:6875000:FEC_NONE:QAM_64:0:702:1505<br />
NRK P2:410000000:INVERSION_AUTO:6875000:FEC_NONE:QAM_64:0:701:1504<br />
NRK P1:410000000:INVERSION_AUTO:6875000:FEC_NONE:QAM_64:0:35:1503<br />
NRK1 sorlandet:410000000:INVERSION_AUTO:6875000:FEC_NONE:QAM_64:512:640:3507<br />
ZTV Norway:410000000:INVERSION_AUTO:6875000:FEC_NONE:QAM_64:2161:2162:2160<br />
TV3 Norge:410000000:INVERSION_AUTO:6875000:FEC_NONE:QAM_64:1111:1112:1110<br />
<br />
Note that if you are attempting to decode us cable-tv QAM from your cable set top box, you might use the file /usr/share/dvb-apps/atsc/us-Cable-Standard-center-frequencies-QAM256 rather than /usr/share/dvb-apps/atsc/us-ATSC-center-frequencies-8VSB<br />
<br />
Next try to create a "channels.conf", a file in a hidden (dotted) directory off your "home" directory.<br />
$ mkdir ~/.azap<br />
$ scandvb /usr/share/dvb-apps/atsc/us-ATSC-center-frequencies-8VSB > ~/.azap/channels.conf<br />
<br />
Next display the contents of the channels.conf file to make sure the file creation proceeded correctly<br />
$ cat ~/.azap/channels.conf<br />
<br />
Note: For reasons not readily apparent, tzap used in the UK example above didn't work. So try azap instead, picking the first entry from ~/.azap/channels.conf (The KPAX-DT part)<br />
$ /usr/bin/azap -r -c ~/.azap/channels.conf "KPAX-DT"<br />
which in turn displays lines similar to (terminate with Ctrl-C)<br />
<br />
using '/dev/dvb/adapter0/frontend0' and '/dev/dvb/adapter0/demux0'<br />
tuning to 177028615 Hz<br />
status 1f | signal 0000 | snr ff28 | ber 00000000 | unc 00000000 | FE_HAS_LOCK<br />
... (repeated output) ...<br />
<br />
Then for some statistics, try<br />
$ /usr/bin/dvbtraffic<br />
<br />
<br />
(The budget setup above of course also works for FF cards.)<br />
<br />
== A sample solution for a system with an analog card ==<br />
''write it down if you have one -- I can't do it cause I haven't''<br />
<br />
<br />
== See also ==<br />
* [[Commented software list]] <br />
* [[First steps with a budget DVB card]]</div>Haraldovhttps://www.linuxtv.org/wiki/index.php?title=Example_setups&diff=9234Example setups2007-04-11T10:35:00Z<p>Haraldov: </p>
<hr />
<div>This page lists '''example software configurations''' that you might find helpful as a suggestion of what you can do with your system. <br />
<br />
''For a complete list of programs, see the [[commented software list]] page --- here, you'll find solutions, not just simple programs. For testing purposed or small systems, have a look at the [[First steps with a budget DVB card]].''<br />
<br />
In order to be most useful for the reader, this page is diveded into three sections: <br />
* setups for [[full featured card]]s (DVB cards with hardware decoders)<br />
* setups for [[budget]] cards (DVB cards without hardware decoders) -- see here for USB DVB adapters<br />
* setups for analog TV cards (hey, shouldn't that sort of stuff rather be in the [http://linuxtv.org/v4lwiki/ video4linux wiki]?<br />
<br />
<br />
== A sample solution for a system with a budget DVB card ==<br />
My system is a [[Twinhan DTV Mini Ter]] on a cheap HP Pentium 4 1.2GHz. The graphic card is only an on-board Intel 82810E with shared memory, so nothing fancy. <br />
<br />
After installing the card drivers, I tried several solutions. I didn't get the [[VDR Software Decoder Plugin]] working so I tried [[xine]] -- which worked on the first trial and provides much functionality (for watching) on an easy and intuitive interface. <br />
<br />
<br />
== A sample solution for a system with a full-featured card ==<br />
My system is a Mythtv pc installed with Fedora Core 6 following this howto [http://www.wilsonet.com/mythtv/fcmyth.php]. I use the Technotrend Premium DVB-C 2300 Hybrid dvb-c card<br />
[http://www.linuxtv.org/wiki/index.php/Use_cases#Grimstad_Cable_TV_.5B1.5D]bought from Dvb shop in Germany [http://www.dvbshop.net/index.php/cat/c17_Premium-PCI.html]. I was thinking buying the Technotrend Budget C-1500, but it was out of stock from Dvbshop that time [http://www.dvbshop.net/product_info.php/info/p16_Technotrend-Budget-C-1500-incl--Remote--W98-ME-2K-XP-MCE-.html].<br />
<br />
The Linux 2.6 kernel had already support for Technotrend Premium DVB-C 2300 so the card was autodetected after first time boot. The firmware for the card was not in place so you must download the correct dvb-ttpci-01.fw-2622 (or newer) firmware file from this place [http://www.linuxtv.org/downloads/firmware/]. Place this file in the hotplug directory /lib/firmware and rename to dvb-ttpci-01.fw. Change the permission on the file. After a reboot you should get some file in /dev/dvb/adapter0/<br />
<br />
Using Fedora, assume root privileges then install the dvb utilities with<br />
# yum install dvb-apps<br />
<br />
Scan will need some idea of where to start searching; for this reasons it takes a file for your location as a starting point. Therefore, you need to find channel information for your locality. Again, the location where they are installed may vary. In the following examples, the directory is /usr/share/doc/dvb-utils/examples/scan/dvb-t/; other installations also use /usr/share/doc/dvb-apps-1.1.1 or /usr/local/share/dvb/scan/dvb-t/. DVB-S users should use the folders /usr/share/doc/dvb-utils/examples/scan/dvb-s/, /usr/share/doc/dvb-apps-1.1.1 or /usr/local/share/dvb/scan/dvb-s/. In each case, the name of the file you're looking for is of the form cc-Ttttt, where cc is a two-letter country abbreviation, and Ttttt is the name of the location of the transmitter. So in Adelaide, Australia, you'd look for a file called au-Adelaide; the following example relates to Oxford in the United Kingdom.<br />
<br />
I live in Norway and use Grimstad cabeltv. I did not find any channel information file I could use. But I find one for Norwegian UPC which I edited. I got the correct frequency setting, QAM and so on from the cable box Grimstad cabeltv has delivered me. <br />
<br />
[mythtv@mythpc ~]$ cat no-oslo-UPC<br />
# no-oslo-UPC (cable)<br />
C 410000000 6875000 NONE QAM64<br />
C 418000000 6875000 NONE QAM64<br />
C 426000000 6875000 NONE QAM64<br />
C 442000000 6875000 NONE QAM64<br />
C 450000000 6875000 NONE QAM64<br />
C 458000000 6875000 NONE QAM64<br />
C 466000000 6875000 NONE QAM64<br />
C 474000000 6875000 NONE QAM64<br />
C 482000000 6875000 NONE QAM64<br />
C 490000000 6875000 NONE QAM64<br />
C 498000000 6875000 NONE QAM64 <br />
<br />
First try<br />
<br />
$ /usr/bin/dvbscan /usr/share/dvb-apps/atsc/us-ATSC-center-frequencies-8VSB<br />
<br />
This should produce output saying "WARNING: >>> tuning failed!!!" if a signal was not found on that particular frequency. Eventually, a list of services found should be displayed. Here is a sample list:<br />
<br />
dumping lists (7 services)<br />
KPAX-DT:177028615:8VSB:49:52:1<br />
KPAX-CW:177028615:8VSB:65:68:2<br />
KUFM-HD:551028615:8VSB:49:52:3<br />
KUFM-DT:551028615:8VSB:65:68:4<br />
KTMF-DT:605028615:8VSB:49:52:3<br />
[0001]:605028615:8VSB:49:52:1<br />
KECI-1:629028615:8VSB:49:52:3<br />
<br />
Note that if you are attempting to decode us cable-tv QAM from your cable set top box, you might use the file /usr/share/dvb-apps/atsc/us-Cable-Standard-center-frequencies-QAM256 rather than /usr/share/dvb-apps/atsc/us-ATSC-center-frequencies-8VSB<br />
<br />
Next try to create a "channels.conf", a file in a hidden (dotted) directory off your "home" directory.<br />
$ mkdir ~/.azap<br />
$ scandvb /usr/share/dvb-apps/atsc/us-ATSC-center-frequencies-8VSB > ~/.azap/channels.conf<br />
<br />
Next display the contents of the channels.conf file to make sure the file creation proceeded correctly<br />
$ cat ~/.azap/channels.conf<br />
<br />
Note: For reasons not readily apparent, tzap used in the UK example above didn't work. So try azap instead, picking the first entry from ~/.azap/channels.conf (The KPAX-DT part)<br />
$ /usr/bin/azap -r -c ~/.azap/channels.conf "KPAX-DT"<br />
which in turn displays lines similar to (terminate with Ctrl-C)<br />
<br />
using '/dev/dvb/adapter0/frontend0' and '/dev/dvb/adapter0/demux0'<br />
tuning to 177028615 Hz<br />
status 1f | signal 0000 | snr ff28 | ber 00000000 | unc 00000000 | FE_HAS_LOCK<br />
... (repeated output) ...<br />
<br />
Then for some statistics, try<br />
$ /usr/bin/dvbtraffic<br />
<br />
<br />
(The budget setup above of course also works for FF cards.)<br />
<br />
== A sample solution for a system with an analog card ==<br />
''write it down if you have one -- I can't do it cause I haven't''<br />
<br />
<br />
== See also ==<br />
* [[Commented software list]] <br />
* [[First steps with a budget DVB card]]</div>Haraldovhttps://www.linuxtv.org/wiki/index.php?title=Example_setups&diff=9233Example setups2007-04-11T10:24:47Z<p>Haraldov: </p>
<hr />
<div>This page lists '''example software configurations''' that you might find helpful as a suggestion of what you can do with your system. <br />
<br />
''For a complete list of programs, see the [[commented software list]] page --- here, you'll find solutions, not just simple programs. For testing purposed or small systems, have a look at the [[First steps with a budget DVB card]].''<br />
<br />
In order to be most useful for the reader, this page is diveded into three sections: <br />
* setups for [[full featured card]]s (DVB cards with hardware decoders)<br />
* setups for [[budget]] cards (DVB cards without hardware decoders) -- see here for USB DVB adapters<br />
* setups for analog TV cards (hey, shouldn't that sort of stuff rather be in the [http://linuxtv.org/v4lwiki/ video4linux wiki]?<br />
<br />
<br />
== A sample solution for a system with a budget DVB card ==<br />
My system is a [[Twinhan DTV Mini Ter]] on a cheap HP Pentium 4 1.2GHz. The graphic card is only an on-board Intel 82810E with shared memory, so nothing fancy. <br />
<br />
After installing the card drivers, I tried several solutions. I didn't get the [[VDR Software Decoder Plugin]] working so I tried [[xine]] -- which worked on the first trial and provides much functionality (for watching) on an easy and intuitive interface. <br />
<br />
<br />
== A sample solution for a system with a full-featured card ==<br />
My system is a Mythtv pc installed with Fedora Core 6 following this howto [http://www.wilsonet.com/mythtv/fcmyth.php]. I use the Technotrend Premium DVB-C 2300 Hybrid dvb-c card<br />
[http://www.linuxtv.org/wiki/index.php/Use_cases#Grimstad_Cable_TV_.5B1.5D]bought from Dvb shop in Germany [http://www.dvbshop.net/index.php/cat/c17_Premium-PCI.html]. I was thinking buying the Technotrend Budget C-1500, but it was out of stock from Dvbshop that time [http://www.dvbshop.net/product_info.php/info/p16_Technotrend-Budget-C-1500-incl--Remote--W98-ME-2K-XP-MCE-.html].<br />
<br />
The Linux 2.6 kernel had already support for Technotrend Premium DVB-C 2300 so the card was autodetected after first time boot. The firmware for the card was not in place so you must download the correct dvb-ttpci-01.fw-2622 (or newer) firmware file from this place [http://www.linuxtv.org/downloads/firmware/]. Place this file in the hotplug directory /lib/firmware and rename to dvb-ttpci-01.fw. Change the permission on the file. After a reboot you should get some file in /dev/dvb/adapter0/<br />
<br />
Using Fedora, assume root privileges then install the dvb utilities with<br />
# yum install dvb-apps<br />
<br />
Scan will need some idea of where to start searching; for this reasons it takes a file for your location as a starting point. Therefore, you need to find channel information for your locality. Again, the location where they are installed may vary. In the following examples, the directory is /usr/share/doc/dvb-utils/examples/scan/dvb-t/; other installations also use /usr/share/doc/dvb-apps-1.1.1 or /usr/local/share/dvb/scan/dvb-t/. DVB-S users should use the folders /usr/share/doc/dvb-utils/examples/scan/dvb-s/, /usr/share/doc/dvb-apps-1.1.1 or /usr/local/share/dvb/scan/dvb-s/. In each case, the name of the file you're looking for is of the form cc-Ttttt, where cc is a two-letter country abbreviation, and Ttttt is the name of the location of the transmitter. So in Adelaide, Australia, you'd look for a file called au-Adelaide; the following example relates to Oxford in the United Kingdom.<br />
<br />
<br />
[mythtv@mythpc ~]$ cat dvb-c<br />
# no-oslo-UPC (cable)<br />
C 410000000 6875000 NONE QAM64<br />
C 418000000 6875000 NONE QAM64<br />
C 426000000 6875000 NONE QAM64<br />
C 442000000 6875000 NONE QAM64<br />
C 450000000 6875000 NONE QAM64<br />
C 458000000 6875000 NONE QAM64<br />
C 466000000 6875000 NONE QAM64<br />
C 474000000 6875000 NONE QAM64<br />
C 482000000 6875000 NONE QAM64<br />
C 490000000 6875000 NONE QAM64<br />
C 498000000 6875000 NONE QAM64 <br />
<br />
First try<br />
<br />
$ /usr/bin/dvbscan /usr/share/dvb-apps/atsc/us-ATSC-center-frequencies-8VSB<br />
<br />
This should produce output saying "WARNING: >>> tuning failed!!!" if a signal was not found on that particular frequency. Eventually, a list of services found should be displayed. Here is a sample list:<br />
<br />
dumping lists (7 services)<br />
KPAX-DT:177028615:8VSB:49:52:1<br />
KPAX-CW:177028615:8VSB:65:68:2<br />
KUFM-HD:551028615:8VSB:49:52:3<br />
KUFM-DT:551028615:8VSB:65:68:4<br />
KTMF-DT:605028615:8VSB:49:52:3<br />
[0001]:605028615:8VSB:49:52:1<br />
KECI-1:629028615:8VSB:49:52:3<br />
<br />
Note that if you are attempting to decode us cable-tv QAM from your cable set top box, you might use the file /usr/share/dvb-apps/atsc/us-Cable-Standard-center-frequencies-QAM256 rather than /usr/share/dvb-apps/atsc/us-ATSC-center-frequencies-8VSB<br />
<br />
Next try to create a "channels.conf", a file in a hidden (dotted) directory off your "home" directory.<br />
$ mkdir ~/.azap<br />
$ scandvb /usr/share/dvb-apps/atsc/us-ATSC-center-frequencies-8VSB > ~/.azap/channels.conf<br />
<br />
Next display the contents of the channels.conf file to make sure the file creation proceeded correctly<br />
$ cat ~/.azap/channels.conf<br />
<br />
Note: For reasons not readily apparent, tzap used in the UK example above didn't work. So try azap instead, picking the first entry from ~/.azap/channels.conf (The KPAX-DT part)<br />
$ /usr/bin/azap -r -c ~/.azap/channels.conf "KPAX-DT"<br />
which in turn displays lines similar to (terminate with Ctrl-C)<br />
<br />
using '/dev/dvb/adapter0/frontend0' and '/dev/dvb/adapter0/demux0'<br />
tuning to 177028615 Hz<br />
status 1f | signal 0000 | snr ff28 | ber 00000000 | unc 00000000 | FE_HAS_LOCK<br />
... (repeated output) ...<br />
<br />
Then for some statistics, try<br />
$ /usr/bin/dvbtraffic<br />
<br />
<br />
(The budget setup above of course also works for FF cards.)<br />
<br />
== A sample solution for a system with an analog card ==<br />
''write it down if you have one -- I can't do it cause I haven't''<br />
<br />
<br />
== See also ==<br />
* [[Commented software list]] <br />
* [[First steps with a budget DVB card]]</div>Haraldovhttps://www.linuxtv.org/wiki/index.php?title=Example_setups&diff=9232Example setups2007-04-11T10:22:33Z<p>Haraldov: </p>
<hr />
<div>This page lists '''example software configurations''' that you might find helpful as a suggestion of what you can do with your system. <br />
<br />
''For a complete list of programs, see the [[commented software list]] page --- here, you'll find solutions, not just simple programs. For testing purposed or small systems, have a look at the [[First steps with a budget DVB card]].''<br />
<br />
In order to be most useful for the reader, this page is diveded into three sections: <br />
* setups for [[full featured card]]s (DVB cards with hardware decoders)<br />
* setups for [[budget]] cards (DVB cards without hardware decoders) -- see here for USB DVB adapters<br />
* setups for analog TV cards (hey, shouldn't that sort of stuff rather be in the [http://linuxtv.org/v4lwiki/ video4linux wiki]?<br />
<br />
<br />
== A sample solution for a system with a budget DVB card ==<br />
My system is a [[Twinhan DTV Mini Ter]] on a cheap HP Pentium 4 1.2GHz. The graphic card is only an on-board Intel 82810E with shared memory, so nothing fancy. <br />
<br />
After installing the card drivers, I tried several solutions. I didn't get the [[VDR Software Decoder Plugin]] working so I tried [[xine]] -- which worked on the first trial and provides much functionality (for watching) on an easy and intuitive interface. <br />
<br />
<br />
== A sample solution for a system with a full-featured card ==<br />
My system is a Mythtv pc installed with Fedora Core 6 following this howto [http://www.wilsonet.com/mythtv/fcmyth.php]. I use the Technotrend Premium DVB-C 2300 Hybrid dvb-c card<br />
[http://www.linuxtv.org/wiki/index.php/Use_cases#Grimstad_Cable_TV_.5B1.5D]bought from Dvb shop in Germany [http://www.dvbshop.net/index.php/cat/c17_Premium-PCI.html]. I was thinking buying the Technotrend Budget C-1500, but it was out of stock from Dvbshop that time [http://www.dvbshop.net/product_info.php/info/p16_Technotrend-Budget-C-1500-incl--Remote--W98-ME-2K-XP-MCE-.html].<br />
<br />
The Linux 2.6 kernel had already support for Technotrend Premium DVB-C 2300 so the card was autodetected after first time boot. The firmware for the card was not in place so you must download the correct dvb-ttpci-01.fw-2622 (or newer) firmware file from this place [http://www.linuxtv.org/downloads/firmware/]. Place this file in the hotplug directory /lib/firmware and rename to dvb-ttpci-01.fw. Change the permission on the file. After a reboot you should get some file in /dev/dvb/adapter0/<br />
<br />
Using Fedora, assume root privileges then install the dvb utilities with<br />
# yum install dvb-apps<br />
<br />
Then you must make a conf-file for your cable or satelitt broadcasting. You have some contributed conf-file for every country already in place after you install the dvb-apps package(this howto explain more[http://www.linuxtv.org/wiki/index.php/First_steps_with_a_DVB_device]). For me it was a matter of finding the <br />
<br />
<br />
[mythtv@mythpc ~]$ cat dvb-c<br />
# no-oslo-UPC (cable)<br />
C 410000000 6875000 NONE QAM64<br />
C 418000000 6875000 NONE QAM64<br />
C 426000000 6875000 NONE QAM64<br />
C 442000000 6875000 NONE QAM64<br />
C 450000000 6875000 NONE QAM64<br />
C 458000000 6875000 NONE QAM64<br />
C 466000000 6875000 NONE QAM64<br />
C 474000000 6875000 NONE QAM64<br />
C 482000000 6875000 NONE QAM64<br />
C 490000000 6875000 NONE QAM64<br />
C 498000000 6875000 NONE QAM64 <br />
<br />
First try<br />
<br />
$ /usr/bin/dvbscan /usr/share/dvb-apps/atsc/us-ATSC-center-frequencies-8VSB<br />
<br />
This should produce output saying "WARNING: >>> tuning failed!!!" if a signal was not found on that particular frequency. Eventually, a list of services found should be displayed. Here is a sample list:<br />
<br />
dumping lists (7 services)<br />
KPAX-DT:177028615:8VSB:49:52:1<br />
KPAX-CW:177028615:8VSB:65:68:2<br />
KUFM-HD:551028615:8VSB:49:52:3<br />
KUFM-DT:551028615:8VSB:65:68:4<br />
KTMF-DT:605028615:8VSB:49:52:3<br />
[0001]:605028615:8VSB:49:52:1<br />
KECI-1:629028615:8VSB:49:52:3<br />
<br />
Note that if you are attempting to decode us cable-tv QAM from your cable set top box, you might use the file /usr/share/dvb-apps/atsc/us-Cable-Standard-center-frequencies-QAM256 rather than /usr/share/dvb-apps/atsc/us-ATSC-center-frequencies-8VSB<br />
<br />
Next try to create a "channels.conf", a file in a hidden (dotted) directory off your "home" directory.<br />
$ mkdir ~/.azap<br />
$ scandvb /usr/share/dvb-apps/atsc/us-ATSC-center-frequencies-8VSB > ~/.azap/channels.conf<br />
<br />
Next display the contents of the channels.conf file to make sure the file creation proceeded correctly<br />
$ cat ~/.azap/channels.conf<br />
<br />
Note: For reasons not readily apparent, tzap used in the UK example above didn't work. So try azap instead, picking the first entry from ~/.azap/channels.conf (The KPAX-DT part)<br />
$ /usr/bin/azap -r -c ~/.azap/channels.conf "KPAX-DT"<br />
which in turn displays lines similar to (terminate with Ctrl-C)<br />
<br />
using '/dev/dvb/adapter0/frontend0' and '/dev/dvb/adapter0/demux0'<br />
tuning to 177028615 Hz<br />
status 1f | signal 0000 | snr ff28 | ber 00000000 | unc 00000000 | FE_HAS_LOCK<br />
... (repeated output) ...<br />
<br />
Then for some statistics, try<br />
$ /usr/bin/dvbtraffic<br />
<br />
<br />
(The budget setup above of course also works for FF cards.)<br />
<br />
== A sample solution for a system with an analog card ==<br />
''write it down if you have one -- I can't do it cause I haven't''<br />
<br />
<br />
== See also ==<br />
* [[Commented software list]] <br />
* [[First steps with a budget DVB card]]</div>Haraldovhttps://www.linuxtv.org/wiki/index.php?title=Example_setups&diff=9231Example setups2007-04-11T10:17:56Z<p>Haraldov: </p>
<hr />
<div>This page lists '''example software configurations''' that you might find helpful as a suggestion of what you can do with your system. <br />
<br />
''For a complete list of programs, see the [[commented software list]] page --- here, you'll find solutions, not just simple programs. For testing purposed or small systems, have a look at the [[First steps with a budget DVB card]].''<br />
<br />
In order to be most useful for the reader, this page is diveded into three sections: <br />
* setups for [[full featured card]]s (DVB cards with hardware decoders)<br />
* setups for [[budget]] cards (DVB cards without hardware decoders) -- see here for USB DVB adapters<br />
* setups for analog TV cards (hey, shouldn't that sort of stuff rather be in the [http://linuxtv.org/v4lwiki/ video4linux wiki]?<br />
<br />
<br />
== A sample solution for a system with a budget DVB card ==<br />
My system is a [[Twinhan DTV Mini Ter]] on a cheap HP Pentium 4 1.2GHz. The graphic card is only an on-board Intel 82810E with shared memory, so nothing fancy. <br />
<br />
After installing the card drivers, I tried several solutions. I didn't get the [[VDR Software Decoder Plugin]] working so I tried [[xine]] -- which worked on the first trial and provides much functionality (for watching) on an easy and intuitive interface. <br />
<br />
<br />
== A sample solution for a system with a full-featured card ==<br />
My system is a Mythtv pc installed with Fedora Core 6 following this howto [http://www.wilsonet.com/mythtv/fcmyth.php]. I use the Technotrend Premium DVB-C 2300 Hybrid dvb-c card<br />
[http://www.linuxtv.org/wiki/index.php/Use_cases#Grimstad_Cable_TV_.5B1.5D]bought from Dvb shop in Germany [http://www.dvbshop.net/index.php/cat/c17_Premium-PCI.html]. I was thinking buying the Technotrend Budget C-1500, but it was out of stock from Dvbshop that time [http://www.dvbshop.net/product_info.php/info/p16_Technotrend-Budget-C-1500-incl--Remote--W98-ME-2K-XP-MCE-.html].<br />
<br />
The Linux 2.6 kernel had already support for Technotrend Premium DVB-C 2300 so the card was autodetected after first time boot. The firmware for the card was not in place so you must download the correct dvb-ttpci-01.fw-2622 (or newer) firmware file from this place [http://www.linuxtv.org/downloads/firmware/]. Place this file in the hotplug directory /lib/firmware and rename to dvb-ttpci-01.fw. Change the permission on the file. After a reboot you should get some file in /dev/dvb/adapter0/<br />
<br />
Using Fedora, assume root privileges then install the dvb utilities with<br />
# yum install dvb-apps<br />
<br />
Then you must make a conf-file for your cable or satelitt broadcasting. You have some contributed conf-file for every country already in place after you install the dvb-apps package(this howto explain more[http://www.linuxtv.org/wiki/index.php/First_steps_with_a_DVB_device]). For me it was a matter of finding the <br />
<br />
[mythtv@mythpc ~]$ cat dvb-c<br />
# no-oslo-UPC (cable)<br />
C 410000000 6875000 NONE QAM64<br />
C 418000000 6875000 NONE QAM64<br />
C 426000000 6875000 NONE QAM64<br />
C 442000000 6875000 NONE QAM64<br />
C 450000000 6875000 NONE QAM64<br />
C 458000000 6875000 NONE QAM64<br />
C 466000000 6875000 NONE QAM64<br />
C 474000000 6875000 NONE QAM64<br />
C 482000000 6875000 NONE QAM64<br />
C 490000000 6875000 NONE QAM64<br />
C 498000000 6875000 NONE QAM64 <br />
<br />
First try<br />
<br />
$ /usr/bin/dvbscan /usr/share/dvb-apps/atsc/us-ATSC-center-frequencies-8VSB<br />
<br />
This should produce output saying "WARNING: >>> tuning failed!!!" if a signal was not found on that particular frequency. Eventually, a list of services found should be displayed. Here is a sample list:<br />
<br />
dumping lists (7 services)<br />
KPAX-DT:177028615:8VSB:49:52:1<br />
KPAX-CW:177028615:8VSB:65:68:2<br />
KUFM-HD:551028615:8VSB:49:52:3<br />
KUFM-DT:551028615:8VSB:65:68:4<br />
KTMF-DT:605028615:8VSB:49:52:3<br />
[0001]:605028615:8VSB:49:52:1<br />
KECI-1:629028615:8VSB:49:52:3<br />
<br />
Note that if you are attempting to decode us cable-tv QAM from your cable set top box, you might use the file /usr/share/dvb-apps/atsc/us-Cable-Standard-center-frequencies-QAM256 rather than /usr/share/dvb-apps/atsc/us-ATSC-center-frequencies-8VSB<br />
<br />
Next try to create a "channels.conf", a file in a hidden (dotted) directory off your "home" directory.<br />
$ mkdir ~/.azap<br />
$ scandvb /usr/share/dvb-apps/atsc/us-ATSC-center-frequencies-8VSB > ~/.azap/channels.conf<br />
<br />
Next display the contents of the channels.conf file to make sure the file creation proceeded correctly<br />
$ cat ~/.azap/channels.conf<br />
<br />
Note: For reasons not readily apparent, tzap used in the UK example above didn't work. So try azap instead, picking the first entry from ~/.azap/channels.conf (The KPAX-DT part)<br />
$ /usr/bin/azap -r -c ~/.azap/channels.conf "KPAX-DT"<br />
which in turn displays lines similar to (terminate with Ctrl-C)<br />
<br />
using '/dev/dvb/adapter0/frontend0' and '/dev/dvb/adapter0/demux0'<br />
tuning to 177028615 Hz<br />
status 1f | signal 0000 | snr ff28 | ber 00000000 | unc 00000000 | FE_HAS_LOCK<br />
... (repeated output) ...<br />
<br />
Then for some statistics, try<br />
$ /usr/bin/dvbtraffic<br />
<br />
<br />
(The budget setup above of course also works for FF cards.)<br />
<br />
== A sample solution for a system with an analog card ==<br />
''write it down if you have one -- I can't do it cause I haven't''<br />
<br />
<br />
== See also ==<br />
* [[Commented software list]] <br />
* [[First steps with a budget DVB card]]</div>Haraldovhttps://www.linuxtv.org/wiki/index.php?title=Example_setups&diff=9230Example setups2007-04-11T10:08:41Z<p>Haraldov: </p>
<hr />
<div>This page lists '''example software configurations''' that you might find helpful as a suggestion of what you can do with your system. <br />
<br />
''For a complete list of programs, see the [[commented software list]] page --- here, you'll find solutions, not just simple programs. For testing purposed or small systems, have a look at the [[First steps with a budget DVB card]].''<br />
<br />
In order to be most useful for the reader, this page is diveded into three sections: <br />
* setups for [[full featured card]]s (DVB cards with hardware decoders)<br />
* setups for [[budget]] cards (DVB cards without hardware decoders) -- see here for USB DVB adapters<br />
* setups for analog TV cards (hey, shouldn't that sort of stuff rather be in the [http://linuxtv.org/v4lwiki/ video4linux wiki]?<br />
<br />
<br />
== A sample solution for a system with a budget DVB card ==<br />
My system is a [[Twinhan DTV Mini Ter]] on a cheap HP Pentium 4 1.2GHz. The graphic card is only an on-board Intel 82810E with shared memory, so nothing fancy. <br />
<br />
After installing the card drivers, I tried several solutions. I didn't get the [[VDR Software Decoder Plugin]] working so I tried [[xine]] -- which worked on the first trial and provides much functionality (for watching) on an easy and intuitive interface. <br />
<br />
<br />
== A sample solution for a system with a full-featured card ==<br />
My system is a Mythtv pc installed with Fedora Core 6 following this howto [http://www.wilsonet.com/mythtv/fcmyth.php]. I use the Technotrend Premium DVB-C 2300 Hybrid dvb-c card<br />
[http://www.linuxtv.org/wiki/index.php/Use_cases#Grimstad_Cable_TV_.5B1.5D]bought from Dvb shop in Germany [http://www.dvbshop.net/index.php/cat/c17_Premium-PCI.html]. I was thinking buying the Technotrend Budget C-1500, but it was out of stock from Dvbshop that time [http://www.dvbshop.net/product_info.php/info/p16_Technotrend-Budget-C-1500-incl--Remote--W98-ME-2K-XP-MCE-.html].<br />
<br />
The Linux 2.6 kernel had already support for Technotrend Premium DVB-C 2300 so the card was autodetected after first time boot. The firmware for the card was not in place so you must download the correct dvb-ttpci-01.fw-2622 (or newer) firmware file from this place [http://www.linuxtv.org/downloads/firmware/]. Place this file in the hotplug directory /lib/firmware and rename to dvb-ttpci-01.fw. Change the permission on the file. After a reboot you should get some file in /dev/dvb/adapter0/<br />
<br />
Using Fedora, assume root privileges then install the dvb utilities with<br />
# yum install dvb-apps<br />
<br />
First try<br />
<br />
$ /usr/bin/scandvb /usr/share/dvb-apps/atsc/us-ATSC-center-frequencies-8VSB<br />
<br />
This should produce output saying "WARNING: >>> tuning failed!!!" if a signal was not found on that particular frequency. Eventually, a list of services found should be displayed. Here is a sample list:<br />
<br />
dumping lists (7 services)<br />
KPAX-DT:177028615:8VSB:49:52:1<br />
KPAX-CW:177028615:8VSB:65:68:2<br />
KUFM-HD:551028615:8VSB:49:52:3<br />
KUFM-DT:551028615:8VSB:65:68:4<br />
KTMF-DT:605028615:8VSB:49:52:3<br />
[0001]:605028615:8VSB:49:52:1<br />
KECI-1:629028615:8VSB:49:52:3<br />
<br />
Note that if you are attempting to decode us cable-tv QAM from your cable set top box, you might use the file /usr/share/dvb-apps/atsc/us-Cable-Standard-center-frequencies-QAM256 rather than /usr/share/dvb-apps/atsc/us-ATSC-center-frequencies-8VSB<br />
<br />
Next try to create a "channels.conf", a file in a hidden (dotted) directory off your "home" directory.<br />
$ mkdir ~/.azap<br />
$ scandvb /usr/share/dvb-apps/atsc/us-ATSC-center-frequencies-8VSB > ~/.azap/channels.conf<br />
<br />
Next display the contents of the channels.conf file to make sure the file creation proceeded correctly<br />
$ cat ~/.azap/channels.conf<br />
<br />
Note: For reasons not readily apparent, tzap used in the UK example above didn't work. So try azap instead, picking the first entry from ~/.azap/channels.conf (The KPAX-DT part)<br />
$ /usr/bin/azap -r -c ~/.azap/channels.conf "KPAX-DT"<br />
which in turn displays lines similar to (terminate with Ctrl-C)<br />
<br />
using '/dev/dvb/adapter0/frontend0' and '/dev/dvb/adapter0/demux0'<br />
tuning to 177028615 Hz<br />
status 1f | signal 0000 | snr ff28 | ber 00000000 | unc 00000000 | FE_HAS_LOCK<br />
... (repeated output) ...<br />
<br />
Then for some statistics, try<br />
$ /usr/bin/dvbtraffic<br />
<br />
<br />
(The budget setup above of course also works for FF cards.)<br />
<br />
== A sample solution for a system with an analog card ==<br />
''write it down if you have one -- I can't do it cause I haven't''<br />
<br />
<br />
== See also ==<br />
* [[Commented software list]] <br />
* [[First steps with a budget DVB card]]</div>Haraldovhttps://www.linuxtv.org/wiki/index.php?title=Example_setups&diff=9229Example setups2007-04-11T10:04:31Z<p>Haraldov: </p>
<hr />
<div>This page lists '''example software configurations''' that you might find helpful as a suggestion of what you can do with your system. <br />
<br />
''For a complete list of programs, see the [[commented software list]] page --- here, you'll find solutions, not just simple programs. For testing purposed or small systems, have a look at the [[First steps with a budget DVB card]].''<br />
<br />
In order to be most useful for the reader, this page is diveded into three sections: <br />
* setups for [[full featured card]]s (DVB cards with hardware decoders)<br />
* setups for [[budget]] cards (DVB cards without hardware decoders) -- see here for USB DVB adapters<br />
* setups for analog TV cards (hey, shouldn't that sort of stuff rather be in the [http://linuxtv.org/v4lwiki/ video4linux wiki]?<br />
<br />
<br />
== A sample solution for a system with a budget DVB card ==<br />
My system is a [[Twinhan DTV Mini Ter]] on a cheap HP Pentium 4 1.2GHz. The graphic card is only an on-board Intel 82810E with shared memory, so nothing fancy. <br />
<br />
After installing the card drivers, I tried several solutions. I didn't get the [[VDR Software Decoder Plugin]] working so I tried [[xine]] -- which worked on the first trial and provides much functionality (for watching) on an easy and intuitive interface. <br />
<br />
<br />
== A sample solution for a system with a full-featured card ==<br />
My system is a Mythtv pc installed with Fedora Core 6 following this howto [http://www.wilsonet.com/mythtv/fcmyth.php]. I use the Technotrend Premium DVB-C 2300 Hybrid dvb-c card<br />
[http://www.linuxtv.org/wiki/index.php/Use_cases#Grimstad_Cable_TV_.5B1.5D] bought from Dvb shop in Germany [http://www.dvbshop.net/index.php/cat/c17_Premium-PCI.html]. I was thinking buying the Technotrend Budget C-1500, but it was out of stock from Dvbshop that time [http://www.dvbshop.net/product_info.php/info/p16_Technotrend-Budget-C-1500-incl--Remote--W98-ME-2K-XP-MCE-.html].<br />
<br />
The Linux 2.6 kernel had already support for Technotrend Premium DVB-C 2300 so the card was autodetected after first time boot. The firmware for the card was not in place so you must download the correct dvb-ttpci-01.fw-2622 (or newer) firmware file from this place [http://www.linuxtv.org/downloads/firmware/]. Place this file in the hotplug directory /lib/firmware and rename to dvb-ttpci-01.fw. Change the permission on the file. After a reboot you should get some file in /dev/dvb/adapter0/<br />
<br />
<br />
(The budget setup above of course also works for FF cards.)<br />
<br />
== A sample solution for a system with an analog card ==<br />
''write it down if you have one -- I can't do it cause I haven't''<br />
<br />
<br />
== See also ==<br />
* [[Commented software list]] <br />
* [[First steps with a budget DVB card]]</div>Haraldovhttps://www.linuxtv.org/wiki/index.php?title=Example_setups&diff=9228Example setups2007-04-11T10:03:55Z<p>Haraldov: </p>
<hr />
<div>This page lists '''example software configurations''' that you might find helpful as a suggestion of what you can do with your system. <br />
<br />
''For a complete list of programs, see the [[commented software list]] page --- here, you'll find solutions, not just simple programs. For testing purposed or small systems, have a look at the [[First steps with a budget DVB card]].''<br />
<br />
In order to be most useful for the reader, this page is diveded into three sections: <br />
* setups for [[full featured card]]s (DVB cards with hardware decoders)<br />
* setups for [[budget]] cards (DVB cards without hardware decoders) -- see here for USB DVB adapters<br />
* setups for analog TV cards (hey, shouldn't that sort of stuff rather be in the [http://linuxtv.org/v4lwiki/ video4linux wiki]?<br />
<br />
<br />
== A sample solution for a system with a budget DVB card ==<br />
My system is a [[Twinhan DTV Mini Ter]] on a cheap HP Pentium 4 1.2GHz. The graphic card is only an on-board Intel 82810E with shared memory, so nothing fancy. <br />
<br />
After installing the card drivers, I tried several solutions. I didn't get the [[VDR Software Decoder Plugin]] working so I tried [[xine]] -- which worked on the first trial and provides much functionality (for watching) on an easy and intuitive interface. <br />
<br />
<br />
== A sample solution for a system with a full-featured card ==<br />
My system is a Mythtv pc installed with Fedora Core 6 following this[howto http://www.wilsonet.com/mythtv/fcmyth.php]. I use the Technotrend Premium DVB-C 2300 Hybrid dvb-c card<br />
[http://www.linuxtv.org/wiki/index.php/Use_cases#Grimstad_Cable_TV_.5B1.5D] bought from Dvb shop in Germany [http://www.dvbshop.net/index.php/cat/c17_Premium-PCI.html]. I was thinking buying the Technotrend Budget C-1500, but it was out of stock from Dvbshop that time [http://www.dvbshop.net/product_info.php/info/p16_Technotrend-Budget-C-1500-incl--Remote--W98-ME-2K-XP-MCE-.html].<br />
<br />
The Linux 2.6 kernel had already support for Technotrend Premium DVB-C 2300 so the card was autodetected after first time boot. The firmware for the card was not in place so you must download the correct dvb-ttpci-01.fw-2622 (or newer) firmware file from this place [http://www.linuxtv.org/downloads/firmware/]. Place this file in the hotplug directory /lib/firmware and rename to dvb-ttpci-01.fw. Change the permission on the file. After a reboot you should get some file in /dev/dvb/adapter0/<br />
<br />
<br />
(The budget setup above of course also works for FF cards.)<br />
<br />
== A sample solution for a system with an analog card ==<br />
''write it down if you have one -- I can't do it cause I haven't''<br />
<br />
<br />
== See also ==<br />
* [[Commented software list]] <br />
* [[First steps with a budget DVB card]]</div>Haraldovhttps://www.linuxtv.org/wiki/index.php?title=Example_setups&diff=9227Example setups2007-04-11T10:01:56Z<p>Haraldov: </p>
<hr />
<div>This page lists '''example software configurations''' that you might find helpful as a suggestion of what you can do with your system. <br />
<br />
''For a complete list of programs, see the [[commented software list]] page --- here, you'll find solutions, not just simple programs. For testing purposed or small systems, have a look at the [[First steps with a budget DVB card]].''<br />
<br />
In order to be most useful for the reader, this page is diveded into three sections: <br />
* setups for [[full featured card]]s (DVB cards with hardware decoders)<br />
* setups for [[budget]] cards (DVB cards without hardware decoders) -- see here for USB DVB adapters<br />
* setups for analog TV cards (hey, shouldn't that sort of stuff rather be in the [http://linuxtv.org/v4lwiki/ video4linux wiki]?<br />
<br />
<br />
== A sample solution for a system with a budget DVB card ==<br />
My system is a [[Twinhan DTV Mini Ter]] on a cheap HP Pentium 4 1.2GHz. The graphic card is only an on-board Intel 82810E with shared memory, so nothing fancy. <br />
<br />
After installing the card drivers, I tried several solutions. I didn't get the [[VDR Software Decoder Plugin]] working so I tried [[xine]] -- which worked on the first trial and provides much functionality (for watching) on an easy and intuitive interface. <br />
<br />
<br />
== A sample solution for a system with a full-featured card ==<br />
My system is a Mythtv pc installed with Fedora Core 6 following this [howto http://www.wilsonet.com/mythtv/fcmyth.php]. I use the Technotrend Premium DVB-C 2300 Hybrid dvb-c card<br />
[http://www.linuxtv.org/wiki/index.php/Use_cases#Grimstad_Cable_TV_.5B1.5D] bought from Dvb shop in Germany [http://www.dvbshop.net/index.php/cat/c17_Premium-PCI.html]. I was thinking buying the Technotrend Budget C-1500, but it was out of stock from Dvbshop that time [http://www.dvbshop.net/product_info.php/info/p16_Technotrend-Budget-C-1500-incl--Remote--W98-ME-2K-XP-MCE-.html].<br />
<br />
The Linux 2.6 kernel had already support for Technotrend Premium DVB-C 2300 so the card was autodetected after first time boot. The firmware for the card was not in place so you must download the correct dvb-ttpci-01.fw-2622 (or newer) firmware file from this place [http://www.linuxtv.org/downloads/firmware/]. Place this file in the hotplug directory /lib/firmware and rename to dvb-ttpci-01.fw. Change the permission on the file. After a reboot you should get some file in /dev/dvb/adapter0/<br />
<br />
<br />
(The budget setup above of course also works for FF cards.)<br />
<br />
== A sample solution for a system with an analog card ==<br />
''write it down if you have one -- I can't do it cause I haven't''<br />
<br />
<br />
== See also ==<br />
* [[Commented software list]] <br />
* [[First steps with a budget DVB card]]</div>Haraldovhttps://www.linuxtv.org/wiki/index.php?title=Example_setups&diff=9226Example setups2007-04-11T09:20:07Z<p>Haraldov: </p>
<hr />
<div>This page lists '''example software configurations''' that you might find helpful as a suggestion of what you can do with your system. <br />
<br />
''For a complete list of programs, see the [[commented software list]] page --- here, you'll find solutions, not just simple programs. For testing purposed or small systems, have a look at the [[First steps with a budget DVB card]].''<br />
<br />
In order to be most useful for the reader, this page is diveded into three sections: <br />
* setups for [[full featured card]]s (DVB cards with hardware decoders)<br />
* setups for [[budget]] cards (DVB cards without hardware decoders) -- see here for USB DVB adapters<br />
* setups for analog TV cards (hey, shouldn't that sort of stuff rather be in the [http://linuxtv.org/v4lwiki/ video4linux wiki]?<br />
<br />
<br />
== A sample solution for a system with a budget DVB card ==<br />
My system is a [[Twinhan DTV Mini Ter]] on a cheap HP Pentium 4 1.2GHz. The graphic card is only an on-board Intel 82810E with shared memory, so nothing fancy. <br />
<br />
After installing the card drivers, I tried several solutions. I didn't get the [[VDR Software Decoder Plugin]] working so I tried [[xine]] -- which worked on the first trial and provides much functionality (for watching) on an easy and intuitive interface. <br />
<br />
<br />
== A sample solution for a system with a full-featured card ==<br />
My system is a Mythtv pc installed with Fedora Core 6 following this [howto http://www.wilsonet.com/mythtv/fcmyth.php]. I use the Technotrend Premium DVB-C 2300 Hybrid dvb-c card[http://www.linuxtv.org/wiki/index.php/Use_cases#Grimstad_Cable_TV_.5B1.5D] bought from Dvb shop in Germany [http://www.dvbshop.net/index.php/cat/c17_Premium-PCI.html]. I was thinking buying the Technotrend Budget C-1500, but it was out of stock from Dvbshop that time [http://www.dvbshop.net/product_info.php/info/p16_Technotrend-Budget-C-1500-incl--Remote--W98-ME-2K-XP-MCE-.html]. <br />
The Linux 2.6 kernel had already support for Technotrend Premium DVB-C 2300 so the card was autodetected after first time boot. The firmware for the card was not in place so you must download the correct dvb-ttpci-01.fw-2622 (or newer) firmware file from this place [http://www.linuxtv.org/downloads/firmware/]. Place this file in the hotplug directory /lib/firmware and rename to dvb-ttpci-01.fw. Change the permission on the file. After a reboot you should get some file in /dev/dvb/adapter0/<br />
<br />
<br />
(The budget setup above of course also works for FF cards.)<br />
<br />
== A sample solution for a system with an analog card ==<br />
''write it down if you have one -- I can't do it cause I haven't''<br />
<br />
<br />
== See also ==<br />
* [[Commented software list]] <br />
* [[First steps with a budget DVB card]]</div>Haraldovhttps://www.linuxtv.org/wiki/index.php?title=Example_setups&diff=9225Example setups2007-04-11T09:17:24Z<p>Haraldov: </p>
<hr />
<div>This page lists '''example software configurations''' that you might find helpful as a suggestion of what you can do with your system. <br />
<br />
''For a complete list of programs, see the [[commented software list]] page --- here, you'll find solutions, not just simple programs. For testing purposed or small systems, have a look at the [[First steps with a budget DVB card]].''<br />
<br />
In order to be most useful for the reader, this page is diveded into three sections: <br />
* setups for [[full featured card]]s (DVB cards with hardware decoders)<br />
* setups for [[budget]] cards (DVB cards without hardware decoders) -- see here for USB DVB adapters<br />
* setups for analog TV cards (hey, shouldn't that sort of stuff rather be in the [http://linuxtv.org/v4lwiki/ video4linux wiki]?<br />
<br />
<br />
== A sample solution for a system with a budget DVB card ==<br />
My system is a [[Twinhan DTV Mini Ter]] on a cheap HP Pentium 4 1.2GHz. The graphic card is only an on-board Intel 82810E with shared memory, so nothing fancy. <br />
<br />
After installing the card drivers, I tried several solutions. I didn't get the [[VDR Software Decoder Plugin]] working so I tried [[xine]] -- which worked on the first trial and provides much functionality (for watching) on an easy and intuitive interface. <br />
<br />
<br />
== A sample solution for a system with a full-featured card ==<br />
My system is a Mythtv pc installed with Fedora Core 6 following this [howto http://www.wilsonet.com/mythtv/fcmyth.php]. I use the Technotrend Premium DVB-C 2300 Hybrid dvb-c card[http://www.linuxtv.org/wiki/index.php/Use_cases#Grimstad_Cable_TV_.5B1.5D] bought from Dvb shop in Germany [http://www.dvbshop.net/index.php/cat/c17_Premium-PCI.html]. I was thinking buying the Technotrend Budget C-1500, but it was out of stock from Dvbshop that time [http://www.dvbshop.net/product_info.php/info/p16_Technotrend-Budget-C-1500-incl--Remote--W98-ME-2K-XP-MCE-.html]. <br />
The Linux 2.6 kernel had already support for Technotrend Premium DVB-C 2300 so the card was autodetected after first time boot. The firmware for the card was not in place so you must download the correct dvb-ttpci-01.fw-2622 (or newer) firmware file from this place [http://www.linuxtv.org/downloads/firmware/]<br />
<br />
<br />
(The budget setup above of course also works for FF cards.)<br />
<br />
== A sample solution for a system with an analog card ==<br />
''write it down if you have one -- I can't do it cause I haven't''<br />
<br />
<br />
== See also ==<br />
* [[Commented software list]] <br />
* [[First steps with a budget DVB card]]</div>Haraldovhttps://www.linuxtv.org/wiki/index.php?title=Example_setups&diff=9224Example setups2007-04-11T09:13:55Z<p>Haraldov: </p>
<hr />
<div>This page lists '''example software configurations''' that you might find helpful as a suggestion of what you can do with your system. <br />
<br />
''For a complete list of programs, see the [[commented software list]] page --- here, you'll find solutions, not just simple programs. For testing purposed or small systems, have a look at the [[First steps with a budget DVB card]].''<br />
<br />
In order to be most useful for the reader, this page is diveded into three sections: <br />
* setups for [[full featured card]]s (DVB cards with hardware decoders)<br />
* setups for [[budget]] cards (DVB cards without hardware decoders) -- see here for USB DVB adapters<br />
* setups for analog TV cards (hey, shouldn't that sort of stuff rather be in the [http://linuxtv.org/v4lwiki/ video4linux wiki]?<br />
<br />
<br />
== A sample solution for a system with a budget DVB card ==<br />
My system is a [[Twinhan DTV Mini Ter]] on a cheap HP Pentium 4 1.2GHz. The graphic card is only an on-board Intel 82810E with shared memory, so nothing fancy. <br />
<br />
After installing the card drivers, I tried several solutions. I didn't get the [[VDR Software Decoder Plugin]] working so I tried [[xine]] -- which worked on the first trial and provides much functionality (for watching) on an easy and intuitive interface. <br />
<br />
<br />
== A sample solution for a system with a full-featured card ==<br />
My system is a Mythtv pc installed with Fedora Core 6 following this [howto http://www.wilsonet.com/mythtv/fcmyth.php]. I use the Technotrend Premium DVB-C 2300 Hybrid dvb-c card[http://www.linuxtv.org/wiki/index.php/Use_cases#Grimstad_Cable_TV_.5B1.5D] bought from Dvb shop in Germany [http://www.dvbshop.net/index.php/cat/c17_Premium-PCI.html]. I was thinking buying the Technotrend Budget C-1500, but it was out of stock from Dvbshop that time [http://www.dvbshop.net/product_info.php/info/p16_Technotrend-Budget-C-1500-incl--Remote--W98-ME-2K-XP-MCE-.html]. <br />
The Linux 2.6 kernel had already support for Technotrend Premium DVB-C 2300 so the card was autodetected after first time boot. <br />
<br />
<br />
(The budget setup above of course also works for FF cards.)<br />
<br />
== A sample solution for a system with an analog card ==<br />
''write it down if you have one -- I can't do it cause I haven't''<br />
<br />
<br />
== See also ==<br />
* [[Commented software list]] <br />
* [[First steps with a budget DVB card]]</div>Haraldovhttps://www.linuxtv.org/wiki/index.php?title=Example_setups&diff=9223Example setups2007-04-11T09:07:38Z<p>Haraldov: /* A sample solution for a system with a full-featured card */</p>
<hr />
<div>This page lists '''example software configurations''' that you might find helpful as a suggestion of what you can do with your system. <br />
<br />
''For a complete list of programs, see the [[commented software list]] page --- here, you'll find solutions, not just simple programs. For testing purposed or small systems, have a look at the [[First steps with a budget DVB card]].''<br />
<br />
In order to be most useful for the reader, this page is diveded into three sections: <br />
* setups for [[full featured card]]s (DVB cards with hardware decoders)<br />
* setups for [[budget]] cards (DVB cards without hardware decoders) -- see here for USB DVB adapters<br />
* setups for analog TV cards (hey, shouldn't that sort of stuff rather be in the [http://linuxtv.org/v4lwiki/ video4linux wiki]?<br />
<br />
<br />
== A sample solution for a system with a budget DVB card ==<br />
My system is a [[Twinhan DTV Mini Ter]] on a cheap HP Pentium 4 1.2GHz. The graphic card is only an on-board Intel 82810E with shared memory, so nothing fancy. <br />
<br />
After installing the card drivers, I tried several solutions. I didn't get the [[VDR Software Decoder Plugin]] working so I tried [[xine]] -- which worked on the first trial and provides much functionality (for watching) on an easy and intuitive interface. <br />
<br />
<br />
== A sample solution for a system with a full-featured card ==<br />
My system is a Mythtv pc installed with Fedora Core 6 following this [howto http://www.wilsonet.com/mythtv/fcmyth.php]. I use the Technotrend Premium DVB-C 2300 Hybrid dvb-c card [http://www.linuxtv.org/wiki/index.php/Use_cases#Grimstad_Cable_TV_.5B1.5D ] bought from Dvb shop in Germany [http://www.dvbshop.net/index.php/cat/c17_Premium-PCI.html]. <br />
<br />
After installing the card drivers, I tried several solutions. I didn't get the [[VDR Software Decoder Plugin]] working so I tried [[xine]] -- which worked on the first trial and provides much functionality (for watching) on an easy and intuitive interface.<br />
<br />
(The budget setup above of course also works for FF cards.)<br />
<br />
== A sample solution for a system with an analog card ==<br />
''write it down if you have one -- I can't do it cause I haven't''<br />
<br />
<br />
== See also ==<br />
* [[Commented software list]] <br />
* [[First steps with a budget DVB card]]</div>Haraldovhttps://www.linuxtv.org/wiki/index.php?title=Conditional_Access_Module_usage_examples&diff=9222Conditional Access Module usage examples2007-04-11T09:05:59Z<p>Haraldov: </p>
<hr />
<div>This pages contains a list of ''working'' solutions for various encrypted operators across the world. Please do not list solutions that are still in development.<br />
<br />
The main purpose of this page is to be a good starting point for beginners so<br />
they can choose the right type of hardware for their needs. <br />
<br />
If you want to add content to this page, feel free to do so, but please respect this layout:<br />
<br />
* Section Country (In alphabetical order)<br />
* sub-section: Operator<br />
* A table for budget card that would contain: software, card, CAM type, CAM brand, comments<br />
* A likewise table for FF cards.<br />
<br />
== France ==<br />
<br />
=== TPS ===<br />
<br />
{| border=1 cellpadding=2 cellspacing=0 valign="top"<br />
|+'''Solutions with budget cards'''<br />
|- bgcolor=#efefef valign="top"<br />
|'''Software'''<br />
|'''Card'''<br />
|'''CAM type'''<br />
|'''CAM brand'''<br />
|'''Comments'''<br />
|- valign="top"<br />
| [http://linuxtv.org/vdrwiki/ VDR] 1.3.x<br />
| [[Hauppauge_WinTV_NOVA-CI_PCI|Hauppauge Nova-CI-S]]<br />
| Viaccess<br />
| Aston<br />
| Used with [http://linuxtv.org/vdrwiki/index.php/Xine-plugin xine plugin]<br />
|}<br />
<br />
== Norway ==<br />
<br />
=== Grimstad Cable TV [http://www.gktv.no/?sub=indeks] ===<br />
<br />
{| border=1 cellpadding=2 cellspacing=0 valign="top"<br />
|+'''Solutions with budget cards'''<br />
|- bgcolor=#efefef valign="top"<br />
|'''Software'''<br />
|'''Card'''<br />
|'''CAM type'''<br />
|'''CAM brand'''<br />
|'''Comments'''<br />
|- valign="top"<br />
| [http://www.mythtv.org/] Mythtv 0.20<br />
| Technotrend Premium DVB-C 2300 Hybrid [http://www.linuxtv.org/wiki/index.php/Technotrend]<br />
| No encryption<br />
| Technotrend CI [http://www.dvbshop.net/product_info.php/info/p52_Technotrend-Budget-PCI-CI--for-Budget-Nova-series-.html]<br />
| Telenor Cable TV send unencrypted most of the channels. You must use Chinacrypt CAM-Modules for viewing encrypted channels + pay card. Have not tried doing this.<br />
|}</div>Haraldovhttps://www.linuxtv.org/wiki/index.php?title=Conditional_Access_Module_usage_examples&diff=9221Conditional Access Module usage examples2007-04-11T08:54:17Z<p>Haraldov: </p>
<hr />
<div>This pages contains a list of ''working'' solutions for various encrypted operators across the world. Please do not list solutions that are still in development.<br />
<br />
The main purpose of this page is to be a good starting point for beginners so<br />
they can choose the right type of hardware for their needs. <br />
<br />
If you want to add content to this page, feel free to do so, but please respect this layout:<br />
<br />
* Section Country (In alphabetical order)<br />
* sub-section: Operator<br />
* A table for budget card that would contain: software, card, CAM type, CAM brand, comments<br />
* A likewise table for FF cards.<br />
<br />
== France ==<br />
<br />
=== TPS ===<br />
<br />
{| border=1 cellpadding=2 cellspacing=0 valign="top"<br />
|+'''Solutions with budget cards'''<br />
|- bgcolor=#efefef valign="top"<br />
|'''Software'''<br />
|'''Card'''<br />
|'''CAM type'''<br />
|'''CAM brand'''<br />
|'''Comments'''<br />
|- valign="top"<br />
| [http://linuxtv.org/vdrwiki/ VDR] 1.3.x<br />
| [[Hauppauge_WinTV_NOVA-CI_PCI|Hauppauge Nova-CI-S]]<br />
| Viaccess<br />
| Aston<br />
| Used with [http://linuxtv.org/vdrwiki/index.php/Xine-plugin xine plugin]<br />
|}<br />
<br />
== Norway ==<br />
<br />
=== Grimstad Cable TV [http://www.gktv.no/?sub=indeks] ===<br />
<br />
{| border=1 cellpadding=2 cellspacing=0 valign="top"<br />
|+'''Solutions with budget cards'''<br />
|- bgcolor=#efefef valign="top"<br />
|'''Software'''<br />
|'''Card'''<br />
|'''CAM type'''<br />
|'''CAM brand'''<br />
|'''Comments'''<br />
|- valign="top"<br />
| [http://www.mythtv.org/] Mythtv 0.20<br />
| [http://www.linuxtv.org/wiki/index.php/Technotrend]<br />
| No encryption<br />
| Technotrend CI [http://www.dvbshop.net/product_info.php/info/p52_Technotrend-Budget-PCI-CI--for-Budget-Nova-series-.html]<br />
| Telenor Cable TV send unencrypted most of the channels. You must use Chinacrypt CAM-Modules for viewing encrypted channels + pay card. Have not tried doing this.<br />
|}</div>Haraldovhttps://www.linuxtv.org/wiki/index.php?title=Conditional_Access_Module_usage_examples&diff=9220Conditional Access Module usage examples2007-04-11T08:52:39Z<p>Haraldov: </p>
<hr />
<div>This pages contains a list of ''working'' solutions for various encrypted operators across the world. Please do not list solutions that are still in development.<br />
<br />
The main purpose of this page is to be a good starting point for beginners so<br />
they can choose the right type of hardware for their needs. <br />
<br />
If you want to add content to this page, feel free to do so, but please respect this layout:<br />
<br />
* Section Country (In alphabetical order)<br />
* sub-section: Operator<br />
* A table for budget card that would contain: software, card, CAM type, CAM brand, comments<br />
* A likewise table for FF cards.<br />
<br />
== France ==<br />
<br />
=== TPS ===<br />
<br />
{| border=1 cellpadding=2 cellspacing=0 valign="top"<br />
|+'''Solutions with budget cards'''<br />
|- bgcolor=#efefef valign="top"<br />
|'''Software'''<br />
|'''Card'''<br />
|'''CAM type'''<br />
|'''CAM brand'''<br />
|'''Comments'''<br />
|- valign="top"<br />
| [http://linuxtv.org/vdrwiki/ VDR] 1.3.x<br />
| [[Hauppauge_WinTV_NOVA-CI_PCI|Hauppauge Nova-CI-S]]<br />
| Viaccess<br />
| Aston<br />
| Used with [http://linuxtv.org/vdrwiki/index.php/Xine-plugin xine plugin]<br />
|}<br />
<br />
== Norway ==<br />
<br />
=== Grimstad Cable TV ===<br />
<br />
{| border=1 cellpadding=2 cellspacing=0 valign="top"<br />
|+'''Solutions with budget cards'''<br />
|- bgcolor=#efefef valign="top"<br />
|'''Software'''<br />
|'''Card'''<br />
|'''CAM type'''<br />
|'''CAM brand'''<br />
|'''Comments'''<br />
|- valign="top"<br />
| [http://www.mythtv.org/] Mythtv 0.20<br />
| [http://www.linuxtv.org/wiki/index.php/Technotrend]<br />
| No encryption<br />
| Technotrend CI [http://www.dvbshop.net/product_info.php/info/p52_Technotrend-Budget-PCI-CI--for-Budget-Nova-series-.html]<br />
| Telenor Cable TV send unencrypted most of the channels. You must use Chinacrypt CAM-Modules for viewing encrypted channels + pay card. Have not tried doing this.<br />
|}</div>Haraldovhttps://www.linuxtv.org/wiki/index.php?title=Conditional_Access_Module_usage_examples&diff=9219Conditional Access Module usage examples2007-04-11T08:52:02Z<p>Haraldov: </p>
<hr />
<div>This pages contains a list of ''working'' solutions for various encrypted operators across the world. Please do not list solutions that are still in development.<br />
<br />
The main purpose of this page is to be a good starting point for beginners so<br />
they can choose the right type of hardware for their needs. <br />
<br />
If you want to add content to this page, feel free to do so, but please respect this layout:<br />
<br />
* Section Country (In alphabetical order)<br />
* sub-section: Operator<br />
* A table for budget card that would contain: software, card, CAM type, CAM brand, comments<br />
* A likewise table for FF cards.<br />
<br />
== France ==<br />
<br />
=== TPS ===<br />
<br />
{| border=1 cellpadding=2 cellspacing=0 valign="top"<br />
|+'''Solutions with budget cards'''<br />
|- bgcolor=#efefef valign="top"<br />
|'''Software'''<br />
|'''Card'''<br />
|'''CAM type'''<br />
|'''CAM brand'''<br />
|'''Comments'''<br />
|- valign="top"<br />
| [http://linuxtv.org/vdrwiki/ VDR] 1.3.x<br />
| [[Hauppauge_WinTV_NOVA-CI_PCI|Hauppauge Nova-CI-S]]<br />
| Viaccess<br />
| Aston<br />
| Used with [http://linuxtv.org/vdrwiki/index.php/Xine-plugin xine plugin]<br />
|}<br />
<br />
== Norway ==<br />
<br />
=== Grimstad Cable TV ===<br />
<br />
{| border=1 cellpadding=2 cellspacing=0 valign="top"<br />
|+'''Solutions with budget cards'''<br />
|- bgcolor=#efefef valign="top"<br />
|'''Software'''<br />
|'''Card'''<br />
|'''CAM type'''<br />
|'''CAM brand'''<br />
|'''Comments'''<br />
|- valign="top"<br />
| [http://www.mythtv.org/] Mythtv 0.20<br />
| [http://www.linuxtv.org/wiki/index.php/Technotrend]<br />
| No encryption<br />
| Technotrend CI [http://www.dvbshop.net/product_info.php/info/p52_Technotrend-Budget-PCI-CI--for-Budget-Nova-series-.html]<br />
| Telenor Cable TV send unencrypted most of the channels. You must use Chinacrypt CAM-Modules for viewing encrypted channels + pay card. <br />
|}</div>Haraldovhttps://www.linuxtv.org/wiki/index.php?title=Conditional_Access_Module_usage_examples&diff=9218Conditional Access Module usage examples2007-04-11T08:48:30Z<p>Haraldov: </p>
<hr />
<div>This pages contains a list of ''working'' solutions for various encrypted operators across the world. Please do not list solutions that are still in development.<br />
<br />
The main purpose of this page is to be a good starting point for beginners so<br />
they can choose the right type of hardware for their needs. <br />
<br />
If you want to add content to this page, feel free to do so, but please respect this layout:<br />
<br />
* Section Country (In alphabetical order)<br />
* sub-section: Operator<br />
* A table for budget card that would contain: software, card, CAM type, CAM brand, comments<br />
* A likewise table for FF cards.<br />
<br />
== France ==<br />
<br />
=== TPS ===<br />
<br />
{| border=1 cellpadding=2 cellspacing=0 valign="top"<br />
|+'''Solutions with budget cards'''<br />
|- bgcolor=#efefef valign="top"<br />
|'''Software'''<br />
|'''Card'''<br />
|'''CAM type'''<br />
|'''CAM brand'''<br />
|'''Comments'''<br />
|- valign="top"<br />
| [http://linuxtv.org/vdrwiki/ VDR] 1.3.x<br />
| [[Hauppauge_WinTV_NOVA-CI_PCI|Hauppauge Nova-CI-S]]<br />
| Viaccess<br />
| Aston<br />
| Used with [http://linuxtv.org/vdrwiki/index.php/Xine-plugin xine plugin]<br />
|}<br />
<br />
== Norway ==<br />
<br />
=== Telenor Cable TV ===<br />
<br />
{| border=1 cellpadding=2 cellspacing=0 valign="top"<br />
|+'''Solutions with budget cards'''<br />
|- bgcolor=#efefef valign="top"<br />
|'''Software'''<br />
|'''Card'''<br />
|'''CAM type'''<br />
|'''CAM brand'''<br />
|'''Comments'''<br />
|- valign="top"<br />
| [http://www.mythtv.org/] Mythtv 0.20<br />
| [http://www.linuxtv.org/wiki/index.php/Technotrend]<br />
| No encryption<br />
| Technotrend CI [http://www.dvbshop.net/product_info.php/info/p52_Technotrend-Budget-PCI-CI--for-Budget-Nova-series-.html]<br />
| Used with<br />
|}</div>Haraldovhttps://www.linuxtv.org/wiki/index.php?title=Conditional_Access_Module_usage_examples&diff=9217Conditional Access Module usage examples2007-04-11T08:45:55Z<p>Haraldov: /* Telenor Cable TV */</p>
<hr />
<div>This pages contains a list of ''working'' solutions for various encrypted operators across the world. Please do not list solutions that are still in development.<br />
<br />
The main purpose of this page is to be a good starting point for beginners so<br />
they can choose the right type of hardware for their needs. <br />
<br />
If you want to add content to this page, feel free to do so, but please respect this layout:<br />
<br />
* Section Country (In alphabetical order)<br />
* sub-section: Operator<br />
* A table for budget card that would contain: software, card, CAM type, CAM brand, comments<br />
* A likewise table for FF cards.<br />
<br />
== France ==<br />
<br />
=== TPS ===<br />
<br />
{| border=1 cellpadding=2 cellspacing=0 valign="top"<br />
|+'''Solutions with budget cards'''<br />
|- bgcolor=#efefef valign="top"<br />
|'''Software'''<br />
|'''Card'''<br />
|'''CAM type'''<br />
|'''CAM brand'''<br />
|'''Comments'''<br />
|- valign="top"<br />
| [http://linuxtv.org/vdrwiki/ VDR] 1.3.x<br />
| [[Hauppauge_WinTV_NOVA-CI_PCI|Hauppauge Nova-CI-S]]<br />
| Viaccess<br />
| Aston<br />
| Used with [http://linuxtv.org/vdrwiki/index.php/Xine-plugin xine plugin]<br />
|}<br />
<br />
== Norway ==<br />
<br />
=== Telenor Cable TV ===<br />
<br />
{| border=1 cellpadding=2 cellspacing=0 valign="top"<br />
|+'''Solutions with budget cards'''<br />
|- bgcolor=#efefef valign="top"<br />
|'''Software'''<br />
|'''Card'''<br />
|'''CAM type'''<br />
|'''CAM brand'''<br />
|'''Comments'''<br />
|- valign="top"<br />
| [http://www.mythtv.org/] Mythtv 0.20<br />
| [http://www.linuxtv.org/wiki/index.php/Technotrend]<br />
| Viaccess<br />
| Aston<br />
| Used with [http://linuxtv.org/vdrwiki/index.php/Xine-plugin xine plugin]<br />
|}</div>Haraldovhttps://www.linuxtv.org/wiki/index.php?title=Conditional_Access_Module_usage_examples&diff=9216Conditional Access Module usage examples2007-04-11T08:41:54Z<p>Haraldov: /* Telenor Cable TV */</p>
<hr />
<div>This pages contains a list of ''working'' solutions for various encrypted operators across the world. Please do not list solutions that are still in development.<br />
<br />
The main purpose of this page is to be a good starting point for beginners so<br />
they can choose the right type of hardware for their needs. <br />
<br />
If you want to add content to this page, feel free to do so, but please respect this layout:<br />
<br />
* Section Country (In alphabetical order)<br />
* sub-section: Operator<br />
* A table for budget card that would contain: software, card, CAM type, CAM brand, comments<br />
* A likewise table for FF cards.<br />
<br />
== France ==<br />
<br />
=== TPS ===<br />
<br />
{| border=1 cellpadding=2 cellspacing=0 valign="top"<br />
|+'''Solutions with budget cards'''<br />
|- bgcolor=#efefef valign="top"<br />
|'''Software'''<br />
|'''Card'''<br />
|'''CAM type'''<br />
|'''CAM brand'''<br />
|'''Comments'''<br />
|- valign="top"<br />
| [http://linuxtv.org/vdrwiki/ VDR] 1.3.x<br />
| [[Hauppauge_WinTV_NOVA-CI_PCI|Hauppauge Nova-CI-S]]<br />
| Viaccess<br />
| Aston<br />
| Used with [http://linuxtv.org/vdrwiki/index.php/Xine-plugin xine plugin]<br />
|}<br />
<br />
== Norway ==<br />
<br />
=== Telenor Cable TV ===<br />
<br />
{| border=1 cellpadding=2 cellspacing=0 valign="top"<br />
|+'''Solutions with budget cards'''<br />
|- bgcolor=#efefef valign="top"<br />
|'''Software'''<br />
|'''Card'''<br />
|'''CAM type'''<br />
|'''CAM brand'''<br />
|'''Comments'''<br />
|- valign="top"<br />
| [http://www.mythtv.org/] Mythtv 0.20<br />
| [[Hauppauge_WinTV_NOVA-CI_PCI|Hauppauge Nova-CI-S]]<br />
| Viaccess<br />
| Aston<br />
| Used with [http://linuxtv.org/vdrwiki/index.php/Xine-plugin xine plugin]<br />
|}</div>Haraldovhttps://www.linuxtv.org/wiki/index.php?title=Conditional_Access_Module_usage_examples&diff=9215Conditional Access Module usage examples2007-04-11T08:40:32Z<p>Haraldov: /* Telenor */</p>
<hr />
<div>This pages contains a list of ''working'' solutions for various encrypted operators across the world. Please do not list solutions that are still in development.<br />
<br />
The main purpose of this page is to be a good starting point for beginners so<br />
they can choose the right type of hardware for their needs. <br />
<br />
If you want to add content to this page, feel free to do so, but please respect this layout:<br />
<br />
* Section Country (In alphabetical order)<br />
* sub-section: Operator<br />
* A table for budget card that would contain: software, card, CAM type, CAM brand, comments<br />
* A likewise table for FF cards.<br />
<br />
== France ==<br />
<br />
=== TPS ===<br />
<br />
{| border=1 cellpadding=2 cellspacing=0 valign="top"<br />
|+'''Solutions with budget cards'''<br />
|- bgcolor=#efefef valign="top"<br />
|'''Software'''<br />
|'''Card'''<br />
|'''CAM type'''<br />
|'''CAM brand'''<br />
|'''Comments'''<br />
|- valign="top"<br />
| [http://linuxtv.org/vdrwiki/ VDR] 1.3.x<br />
| [[Hauppauge_WinTV_NOVA-CI_PCI|Hauppauge Nova-CI-S]]<br />
| Viaccess<br />
| Aston<br />
| Used with [http://linuxtv.org/vdrwiki/index.php/Xine-plugin xine plugin]<br />
|}<br />
<br />
== Norway ==<br />
<br />
=== Telenor Cable TV ===<br />
<br />
{| border=1 cellpadding=2 cellspacing=0 valign="top"<br />
|+'''Solutions with budget cards'''<br />
|- bgcolor=#efefef valign="top"<br />
|'''Software'''<br />
|'''Card'''<br />
|'''CAM type'''<br />
|'''CAM brand'''<br />
|'''Comments'''<br />
|- valign="top"<br />
| [http://linuxtv.org/vdrwiki/ VDR] 1.3.x<br />
| [[Hauppauge_WinTV_NOVA-CI_PCI|Hauppauge Nova-CI-S]]<br />
| Viaccess<br />
| Aston<br />
| Used with [http://linuxtv.org/vdrwiki/index.php/Xine-plugin xine plugin]<br />
|}</div>Haraldovhttps://www.linuxtv.org/wiki/index.php?title=Conditional_Access_Module_usage_examples&diff=9214Conditional Access Module usage examples2007-04-11T08:39:55Z<p>Haraldov: /* Norway */</p>
<hr />
<div>This pages contains a list of ''working'' solutions for various encrypted operators across the world. Please do not list solutions that are still in development.<br />
<br />
The main purpose of this page is to be a good starting point for beginners so<br />
they can choose the right type of hardware for their needs. <br />
<br />
If you want to add content to this page, feel free to do so, but please respect this layout:<br />
<br />
* Section Country (In alphabetical order)<br />
* sub-section: Operator<br />
* A table for budget card that would contain: software, card, CAM type, CAM brand, comments<br />
* A likewise table for FF cards.<br />
<br />
== France ==<br />
<br />
=== TPS ===<br />
<br />
{| border=1 cellpadding=2 cellspacing=0 valign="top"<br />
|+'''Solutions with budget cards'''<br />
|- bgcolor=#efefef valign="top"<br />
|'''Software'''<br />
|'''Card'''<br />
|'''CAM type'''<br />
|'''CAM brand'''<br />
|'''Comments'''<br />
|- valign="top"<br />
| [http://linuxtv.org/vdrwiki/ VDR] 1.3.x<br />
| [[Hauppauge_WinTV_NOVA-CI_PCI|Hauppauge Nova-CI-S]]<br />
| Viaccess<br />
| Aston<br />
| Used with [http://linuxtv.org/vdrwiki/index.php/Xine-plugin xine plugin]<br />
|}<br />
<br />
== Norway ==<br />
<br />
=== Telenor ===<br />
<br />
{| border=1 cellpadding=2 cellspacing=0 valign="top"<br />
|+'''Solutions with budget cards'''<br />
|- bgcolor=#efefef valign="top"<br />
|'''Software'''<br />
|'''Card'''<br />
|'''CAM type'''<br />
|'''CAM brand'''<br />
|'''Comments'''<br />
|- valign="top"<br />
| [http://linuxtv.org/vdrwiki/ VDR] 1.3.x<br />
| [[Hauppauge_WinTV_NOVA-CI_PCI|Hauppauge Nova-CI-S]]<br />
| Viaccess<br />
| Aston<br />
| Used with [http://linuxtv.org/vdrwiki/index.php/Xine-plugin xine plugin]<br />
|}</div>Haraldovhttps://www.linuxtv.org/wiki/index.php?title=Conditional_Access_Module_usage_examples&diff=9213Conditional Access Module usage examples2007-04-11T08:36:41Z<p>Haraldov: /* France */</p>
<hr />
<div>This pages contains a list of ''working'' solutions for various encrypted operators across the world. Please do not list solutions that are still in development.<br />
<br />
The main purpose of this page is to be a good starting point for beginners so<br />
they can choose the right type of hardware for their needs. <br />
<br />
If you want to add content to this page, feel free to do so, but please respect this layout:<br />
<br />
* Section Country (In alphabetical order)<br />
* sub-section: Operator<br />
* A table for budget card that would contain: software, card, CAM type, CAM brand, comments<br />
* A likewise table for FF cards.<br />
<br />
== France ==<br />
<br />
=== TPS ===<br />
<br />
{| border=1 cellpadding=2 cellspacing=0 valign="top"<br />
|+'''Solutions with budget cards'''<br />
|- bgcolor=#efefef valign="top"<br />
|'''Software'''<br />
|'''Card'''<br />
|'''CAM type'''<br />
|'''CAM brand'''<br />
|'''Comments'''<br />
|- valign="top"<br />
| [http://linuxtv.org/vdrwiki/ VDR] 1.3.x<br />
| [[Hauppauge_WinTV_NOVA-CI_PCI|Hauppauge Nova-CI-S]]<br />
| Viaccess<br />
| Aston<br />
| Used with [http://linuxtv.org/vdrwiki/index.php/Xine-plugin xine plugin]<br />
|}<br />
<br />
== Norway ==</div>Haraldov