3Dfx VoodooTV 100 PCI

From LinuxTVWiki
Revision as of 15:32, 14 May 2008 by Mpapet (talk | contribs) (New page: == Gateway/3Dfx STB OEM card == This page needs more information than the meager bits below. At the time of writing this page (May/2008) there are still quite a few of these pci cards a...)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to navigation Jump to search

Gateway/3Dfx STB OEM card

This page needs more information than the meager bits below.

At the time of writing this page (May/2008) there are still quite a few of these pci cards around. This card is identified by a couple of different part numbers. This is one of those devices that should work. You may need to work and re-work the bttv and snd-bt87x module options and modprobe options aggressively to be successful.

The card is a software encoder with a number of OEM variations depending on the region the card was sold. You will need a computer with at least 1.5MHZ CPU to get it working well in Mythtv. The capture encoding will suck a whole lotta CPU cycles at NTSC 720x480.

FEATURES Video works, this is tuner dependent though. I got the NTSC tuner to work. Television audio might work. The alsa developer and user lists offered no support with audio. FM radio tuners are included in some versions.

Retrieved from "https://www.linuxtv.org/wiki/index.php?title=3Dfx_VoodooTV_100_PCI&oldid=19940"