Difference between revisions of "ATI All-In-Wonder X800 XL PCI Express"

From LinuxTVWiki
Jump to navigation Jump to search
Line 20: Line 20:
 
05:00.0 VGA compatible controller: ATI Technologies Inc R430 [Radeon X800 XL] (PCIe)
 
05:00.0 VGA compatible controller: ATI Technologies Inc R430 [Radeon X800 XL] (PCIe)
 
05:00.1 Display controller: ATI Technologies Inc R430 [Radeon X800 XL] (PCIe) (Secondary)
 
05:00.1 Display controller: ATI Technologies Inc R430 [Radeon X800 XL] (PCIe) (Secondary)
  +
  +
lspci
  +
  +
05:00.0 VGA compatible controller [0300]: ATI Technologies Inc R430 [Radeon X800 XL] (PCIe) [1002:554d] (prog-if 00 [VGA controller])
  +
Subsystem: ATI Technologies Inc Device [1002:0322]
  +
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
  +
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
  +
Latency: 0, Cache Line Size: 16 bytes
  +
Interrupt: pin A routed to IRQ 29
  +
Region 0: Memory at e0000000 (64-bit, prefetchable) [size=256M]
  +
Region 2: Memory at dffe0000 (64-bit, non-prefetchable) [size=64K]
  +
Region 4: I/O ports at e000 [size=256]
  +
Expansion ROM at dffc0000 [disabled] [size=128K]
  +
Capabilities: [50] Power Management version 2
  +
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
  +
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
  +
Capabilities: [58] Express (v1) Endpoint, MSI 00
  +
DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <256ns, L1 <4us
  +
ExtTag+ AttnBtn- AttnInd- PwrInd- RBE- FLReset-
  +
DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
  +
RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+
  +
MaxPayload 128 bytes, MaxReadReq 128 bytes
  +
DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend-
  +
LnkCap: Port #0, Speed 2.5GT/s, Width x16, ASPM L0s L1, Latency L0 <256ns, L1 <2us
  +
ClockPM- Surprise- LLActRep- BwNot-
  +
LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk+
  +
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
  +
LnkSta: Speed 2.5GT/s, Width x16, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
  +
Capabilities: [80] MSI: Enable+ Count=1/1 Maskable- 64bit+
  +
Address: 00000000fee0100c Data: 41b1
  +
Capabilities: [100 v1] Advanced Error Reporting
  +
UESta: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
  +
UEMsk: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
  +
UESvrt: DLP+ SDES- TLP- FCP+ CmpltTO- CmpltAbrt- UnxCmplt- RxOF+ MalfTLP+ ECRC- UnsupReq- ACSViol-
  +
CESta: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr-
  +
CEMsk: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr-
  +
AERCap: First Error Pointer: 00, GenCap- CGenEn- ChkCap- ChkEn-
  +
Kernel driver in use: radeon
  +
  +
05:00.1 Display controller [0380]: ATI Technologies Inc R430 [Radeon X800 XL] (PCIe) (Secondary) [1002:556d]
  +
Subsystem: ATI Technologies Inc Device [1002:0323]
  +
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
  +
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
  +
Latency: 0, Cache Line Size: 16 bytes
  +
Region 0: Memory at dfff0000 (64-bit, non-prefetchable) [size=64K]
  +
Capabilities: [50] Power Management version 2
  +
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
  +
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
  +
Capabilities: [58] Express (v1) Endpoint, MSI 00
  +
DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <256ns, L1 <4us
  +
ExtTag- AttnBtn- AttnInd- PwrInd- RBE- FLReset-
  +
DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
  +
RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
  +
MaxPayload 128 bytes, MaxReadReq 128 bytes
  +
DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend-
  +
LnkCap: Port #0, Speed 2.5GT/s, Width x16, ASPM L0s L1, Latency L0 <256ns, L1 <2us
  +
ClockPM- Surprise- LLActRep- BwNot-
  +
LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk+
  +
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
  +
LnkSta: Speed 2.5GT/s, Width x16, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
   
 
==Making it Work==
 
==Making it Work==

Revision as of 13:03, 22 September 2010

Overview/Features

  • NTSC TV Tuner
  • FM Radio
  • Interfaces 1.0 x VGA - 29 pin combined DVI ( With adapter ), 1.0 x S-video output - 4 pin mini-DIN ( On supplied cable ), 1.0 x VGA - 15 pin HD D-Sub (HD-15) ( On supplied cable ), 1.0 x DVI-I - 15 pin HD D-Sub (HD-15), 1.0 x Composite video output - RCA Compatible Slots 1.0 x PCI Express x16
  • Max Resolution (external) 2048 x 1536

Components Used

Other Images

See links for images.

Identification

lspci -vvvnn

 05:00.0 VGA compatible controller: ATI Technologies Inc R430 [Radeon X800 XL] (PCIe)
 05:00.1 Display controller: ATI Technologies Inc R430 [Radeon X800 XL] (PCIe) (Secondary)

lspci

05:00.0 VGA compatible controller [0300]: ATI Technologies Inc R430 [Radeon X800 XL] (PCIe) [1002:554d] (prog-if 00 [VGA controller])

Subsystem: ATI Technologies Inc Device [1002:0322] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 16 bytes Interrupt: pin A routed to IRQ 29 Region 0: Memory at e0000000 (64-bit, prefetchable) [size=256M] Region 2: Memory at dffe0000 (64-bit, non-prefetchable) [size=64K] Region 4: I/O ports at e000 [size=256] Expansion ROM at dffc0000 [disabled] [size=128K] Capabilities: [50] Power Management version 2 Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME- Capabilities: [58] Express (v1) Endpoint, MSI 00 DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <256ns, L1 <4us ExtTag+ AttnBtn- AttnInd- PwrInd- RBE- FLReset- DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported- RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+ MaxPayload 128 bytes, MaxReadReq 128 bytes DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend- LnkCap: Port #0, Speed 2.5GT/s, Width x16, ASPM L0s L1, Latency L0 <256ns, L1 <2us ClockPM- Surprise- LLActRep- BwNot- LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk+ ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt- LnkSta: Speed 2.5GT/s, Width x16, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt- Capabilities: [80] MSI: Enable+ Count=1/1 Maskable- 64bit+ Address: 00000000fee0100c Data: 41b1 Capabilities: [100 v1] Advanced Error Reporting UESta: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol- UEMsk: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol- UESvrt: DLP+ SDES- TLP- FCP+ CmpltTO- CmpltAbrt- UnxCmplt- RxOF+ MalfTLP+ ECRC- UnsupReq- ACSViol- CESta: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr- CEMsk: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr- AERCap: First Error Pointer: 00, GenCap- CGenEn- ChkCap- ChkEn- Kernel driver in use: radeon

05:00.1 Display controller [0380]: ATI Technologies Inc R430 [Radeon X800 XL] (PCIe) (Secondary) [1002:556d]

Subsystem: ATI Technologies Inc Device [1002:0323] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 16 bytes Region 0: Memory at dfff0000 (64-bit, non-prefetchable) [size=64K] Capabilities: [50] Power Management version 2 Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME- Capabilities: [58] Express (v1) Endpoint, MSI 00 DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <256ns, L1 <4us ExtTag- AttnBtn- AttnInd- PwrInd- RBE- FLReset- DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported- RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop- MaxPayload 128 bytes, MaxReadReq 128 bytes DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend- LnkCap: Port #0, Speed 2.5GT/s, Width x16, ASPM L0s L1, Latency L0 <256ns, L1 <2us ClockPM- Surprise- LLActRep- BwNot- LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk+ ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt- LnkSta: Speed 2.5GT/s, Width x16, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-

Making it Work

Video card works with Xorg. See links below. Still attempting to get TV display working under Linux. Gatos project software doesn't seem to be able to locate the card. Checking other options.

Some sites, such as this one on ATI TV-out indicate Gatos project doesn't support ATI X800 series cards. Although Gatos site list of supported cards indicates support for All in Wonder (Radeon) and support for Theater 200 chips merged into Xorg as of release 7.

Firmware

Drivers

Two types of drivers are available, proprietary and Open Source.

Xorg related information (xf86-video-ati):


AMD/ATI Linux driver (fglrx):

According to the unofficial AMD Linux driver wiki the card is supported with the legacy ATI 9-3 Catalyst release. Currently there is NO support for 2.6.29 or newer kernels.

Sample Kernel Output

Coming soon:

  1. dmesg

Remote Control Support

Comes with Remote Wonder Plus.

External Links

The following sites have reviews and specifications for the card as well as photos of it:


Kernel and Xorg related information (xf86-video-ati):


Catalyst driver information (fglrx):


Some attempts to get TV working with this card: http://forums.debian.net/viewtopic.php?f=7&t=55253
Some attempts to get TV working with other ATI cards: