AVerMedia AVerTV DVB-T 777 (A16AR)

From LinuxTVWiki
Revision as of 16:48, 16 May 2006 by Klez (talk | contribs)
Jump to navigation Jump to search
The printable version is no longer supported and may have rendering errors. Please update your browser bookmarks and please use the default browser print function instead.

PREFACE

The Avermedia 777 is a budget pci DVB-T Card. You can get one for about 65 euros.
You must know that Avermedia777 features a Philips saa7134 and Zarlink MT352 demodulator.

For make this card work, you need at last a vanilla kernel 2.6.17rc3. First we will see how to configure our kernel for the avermedia 777:

KERNEL CONFIGURATION

DEVICE DRIVERS -> I2C ->

select:

 [*] I2C Support
 [*] I2C Device Interface

DEVICE DRIVERS -> I2C -> I2C Algorithms

 [*] I2C bit-banging interfaces

DEVICE DRIVERS -> MULTIMEDIA DEVICES ->

select:

 [*] Video For Linux

and then go into video for linux, see the screenshot

DEVICE DRIVERS -> MULTIMEDIA DEVICES -> VIDEO FOR LINUX ->

--- Video Adapters
[ ] Enable advanced debug functionality
< > BT848 Video For Linux
< > CPiA Video For Linux
< > CPia2 Video For Linux
< > SAA5246A, SAA5281 Teletext processor
< > SAA5249 Teletext processor
< > SAB3036 tuner
< > Zoran ZR36057/36067 Video For Linux
<*> Philips SAA7134 support
<*> Philips SAA7134 DMA audio support
<*> DVB/ATSC Support for saa7134 based TV cards
[ } Build all supported frontends for saa7134 based TV cards
[*] Zarlink MT352 DVB-T Support
[ ] Philips TDA10045H/TDA10046H DVB-T Support
[ ] NXT2002/NXT2004 ATSC Support
< > Siemens-Nixdorf "Multimedia eXtension Board"
< > Philips Semiconductors "dpc7146 demonstration board"
< > Hexium HV-PCI6 and Orion frame grabber
< > Hexium Gemini frame grabber
< > Conexant 2388x (bt878 successor) support
< > OmniVision Camera Chip support


You must select these components in the kernel configuration if you want your avermedia777 to work. You can compile-in kernel (marked as asterisk) or as Modules (typing M). Some people may think that if they compile in-kernel these components, in particular the saa7134, they won't be able to specify parameters. That's wrong