Archived:Em2880/Todo

From LinuxTVWiki
Revision as of 21:44, 18 November 2006 by Openmedia (talk | contribs)
Jump to navigation Jump to search

Todo

I'll list the things are which are still outstanding before the current em2880 driver can be merged with the main v4l-dvb repository.

em2800 autodetection

please fill out the dmesg output for that modprobe command

Terratec Cinergy 200 USB

modprobe em28xx i2c_scan=1 card=6

relevant dmesg output:

em28xx #0: found i2c device @ 0x4a [saa7113h]
em28xx #0: found i2c device @ 0x60 [remote IR sensor]
em28xx #0: found i2c device @ 0x62 [???]
em28xx #0: found i2c device @ 0x64 [???]
em28xx #0: found i2c device @ 0x86 [tda9887]
em28xx #0: found i2c device @ 0xc0 [tuner (analog)]
em28xx #0: found i2c device @ 0xc2 [tuner (analog)]

Leadtek Winfast USB II

modprobe em28xx i2c_scan=1 card=7

Kworld USB2800

modprobe em28xx i2c_scan=1 card=8

V-Gear PocketTV

modprobe em28xx i2c_scan=1 card=37

Hauppauge HVR 900 65008/A1C0 New Zealand

USB id = 2040:6500

modprobe em28xx i2c_scan=1
em28xx #0: found i2c device @ 0xa0 [eeprom]
em28xx #0: found i2c device @ 0xb8 [tvp5150a]
em28xx #0: found i2c device @ 0xc2 [tuner (analog)]

Terratec Cinergy Hybrid XS France

  • Secam Support

USB Logs are needed (tune to an analogue TV channel):

http://www.linuxtv.org/v4lwiki/index.php/USBVideo

+ root access to a box where that driver can be tested.

Contact mrechberger@gmail.com if you're able to help!



PAL-BG/PAL-I/PAL-M em2880

this requires some known changes in the xc3028 module