Compro VideoMate E800F

From LinuxTVWiki
Revision as of 13:20, 26 August 2008 by Teg001 (talk | contribs)
Jump to navigation Jump to search
File:Compro Video Mate E800.jpg
Compro VideoMate E800F(Click for High Resolution Version)


This article is a stub or is incomplete.
This article requires expansion. Please help add informative information if you can.

A hybrid DVB-T PCIe card from Compro Technology.

It is not supported under Linux.

Overview/Features

Able to deliver one analogue channel and one digital channel.

Components Used

  • Conexant CX23885 PCIe bridge
  • Zarlink ZL10353 0619T S Demodulator
  • Xceive xc3008 Tuner
  • Conexant MPEG II A/V Encoder CX23417-11Z

Other images

Identification

lspci

Output of lspci -vv

04:00.0 Multimedia video controller: Conexant Unknown device 8852 (rev 02)
        Subsystem: Compro Technology, Inc. Unknown device e800
        Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
        Latency: 0, Cache Line Size: 32 bytes
        Interrupt: pin A routed to IRQ 16
        Region 0: Memory at fe800000 (64-bit, non-prefetchable) [size=2M]
        Capabilities: [40] Express Endpoint IRQ 0
                Device: Supported: MaxPayload 128 bytes, PhantFunc 0, ExtTag-
                Device: Latency L0s <64ns, L1 <1us
                Device: AtnBtn- AtnInd- PwrInd-
                Device: Errors: Correctable- Non-Fatal- Fatal- Unsupported-
                Device: RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+
                Device: MaxPayload 128 bytes, MaxReadReq 512 bytes
                Link: Supported Speed 2.5Gb/s, Width x1, ASPM L0s L1, Port 0
                Link: Latency L0s <2us, L1 <4us
                Link: ASPM Disabled RCB 64 bytes CommClk+ ExtSynch-
                Link: Speed 2.5Gb/s, Width x1
        Capabilities: [80] Power Management version 2
                Flags: PMEClk- DSI+ D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold-)
                Status: D0 PME-Enable- DSel=0 DScale=0 PME-
        Capabilities: [90] Vital Product Data
        Capabilities: [a0] Message Signalled Interrupts: Mask- 64bit+ Queue=0/0 Enable-
                Address: 0000000000000000  Data: 0000


Output of lspci -n

04:00.0 0400: 14f1:8852 (rev 02)

Regspy

This item is missing please provide output for:

  • Card idle
  • DVB-T tuned and working
  • Analog tuned and working
  • Other relevant states for this card.

i2cdetect

Output of i2cdetect -l :

i2c-0   i2c             cx23885[0]                              I2C adapter
i2c-1   i2c             cx23885[0]                              I2C adapter
i2c-2   i2c             cx23885[0]                              I2C adapter
i2c-3   i2c             Hauppauge Nova-T 500 Dual DVB-T         I2C adapter
i2c-4   i2c             DiBX000 tuner I2C bus                   I2C adapter
i2c-5   i2c             DiBX000 tuner I2C bus                   I2C adapter
i2c-6   i2c             NVIDIA i2c adapter                      I2C adapter
i2c-7   i2c             NVIDIA i2c adapter                      I2C adapter
i2c-8   i2c             NVIDIA i2c adapter                      I2C adapter


Output of i2cdetect for each cx23885 reference above:

i2cdetect 0
WARNING! This program can confuse your I2C bus, cause data loss and worse!
I will probe file /dev/i2c-0.
I will probe address range 0x03-0x77.
Continue? [Y/n] Y
     0  1  2  3  4  5  6  7  8  9  a  b  c  d  e  f
00:          -- -- -- -- -- -- -- -- -- -- -- -- 0f
10: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
20: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
30: 30 31 32 33 34 35 36 37 -- -- -- -- -- -- -- --
40: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
50: 50 51 52 53 54 55 56 57 58 59 5a 5b 5c 5d 5e 5f
60: -- -- -- -- -- -- -- -- 68 -- -- -- -- -- -- --
70: -- -- -- -- -- -- -- --
root@quark:~# i2cdetect 1
WARNING! This program can confuse your I2C bus, cause data loss and worse!
I will probe file /dev/i2c-1.
I will probe address range 0x03-0x77.
Continue? [Y/n] Y
     0  1  2  3  4  5  6  7  8  9  a  b  c  d  e  f
00:          -- -- -- -- -- -- -- -- -- -- -- -- --
10: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
20: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
30: 30 31 32 33 34 35 36 37 -- -- -- -- -- -- -- --
40: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
50: 50 51 52 53 54 55 56 57 58 59 5a 5b 5c 5d 5e 5f
60: -- 61 -- -- -- -- -- -- -- -- -- -- -- -- -- --
70: -- -- -- -- -- -- -- --
root@quark:~# i2cdetect 2
WARNING! This program can confuse your I2C bus, cause data loss and worse!
I will probe file /dev/i2c-2.
I will probe address range 0x03-0x77.
Continue? [Y/n] Y
     0  1  2  3  4  5  6  7  8  9  a  b  c  d  e  f
00:          -- -- -- -- -- -- -- -- -- -- -- -- --
10: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
20: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
30: 30 31 32 33 34 35 36 37 -- -- -- -- -- -- -- --
40: -- -- -- -- 44 -- -- -- -- -- -- -- 4c -- -- --
50: 50 51 52 53 54 55 56 57 58 59 5a 5b 5c 5d 5e 5f
60: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
70: -- -- -- -- -- -- -- --


External Links