Compro VideoMate Vista M1F: Difference between revisions

From LinuxTVWiki
Jump to navigation Jump to search
(Created, needs a lot of work)
 
(Completed lspci, firmware and dmesg sections.)
Line 26: Line 26:


# lspci -vvvnn
# lspci -vvvnn
04:03.0 Multimedia controller [0480]: Philips Semiconductors SAA7130 Video Broadcast Decoder [1131:7130] (rev 01)
01:07.0 Multimedia controller [0480]: Philips Semiconductors SAA7131/SAA7133/SAA7135 Video Broadcast Decoder [1131:7133] (rev d1)
Subsystem: Compro Technology, Inc. Videomate DVB-T200 [185b:c901]
Subsystem: Compro Technology, Inc. VideoMate T750 [185b:c900]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 84 (21000ns min, 8000ns max)
Latency: 64 (21000ns min, 8000ns max)
Interrupt: pin A routed to IRQ 20
Interrupt: pin A routed to IRQ 17
Region 0: Memory at fdcfe000 (32-bit, non-prefetchable) [size=1K]
Region 0: Memory at feaff800 (32-bit, non-prefetchable) [size=2K]
Capabilities: [40] Power Management version 1
Capabilities: [40] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=1 PME-
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=1 PME-
Kernel driver in use: saa7134


==Making it Work==
==Making it Work==
Line 41: Line 42:


===Firmware===
===Firmware===
No firmware is needed for this card.
''Is there any firmware specific information for this device? if so, list it here. If your device doesn't require a firmware, simply mention that this is the case.''


===Drivers===
===Drivers===
Line 47: Line 48:


===Sample Kernel Output===
===Sample Kernel Output===
''Provide the '''relevant''' portion of dmesg here. For example:''<br>
# dmesg
# dmesg
[ 4.213572] Linux video capture interface: v2.00
[ 45.569669] saa7130/34: v4l2 driver version 0.2.14 loaded
[ 45.569739] saa7130[0]: found at 0000:04:03.0, rev: 1, irq: 20, latency: 84, mmio: 0xfdcfe000
[ 4.291311] saa7130/34: v4l2 driver version 0.2.15 loaded
[ 4.291667] ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 17
[ 45.569745] saa7130[0]: subsystem: 185b:c901, board: Compro Videomate DVB-T200 [card=71,autodetected]
[ 4.291670] alloc irq_desc for 17 on node -1
[ 45.569753] saa7130[0]: board init: gpio is 843f00
[ 4.291672] alloc kstat_irqs on node -1
[ 45.569809] input: saa7134 IR (Compro Videomate DV as /devices/pci0000:00/0000:00:1e.0/0000:04:03.0/input/input7
[ 45.755429] saa7130[0]: i2c eeprom 00: 5b 18 01 c9 54 20 1c 00 43 43 a9 1c 55 d2 b2 92
[ 4.291680] saa7134 0000:01:07.0: PCI INT A -> Link[LNKB] -> GSI 17 (level, low) -> IRQ 17
[ 4.291684] saa7133[0]: found at 0000:01:07.0, rev: 209, irq: 17, latency: 64, mmio: 0xfeaff800
[ 45.755437] saa7130[0]: i2c eeprom 10: 00 ff 86 0f ff 20 ff ff ff ff ff ff ff ff ff ff
[ 4.291689] saa7133[0]: subsystem: 185b:c900, board: Compro VideoMate T750 [card=139,autodetected]
[ 45.755443] saa7130[0]: i2c eeprom 20: 01 40 01 03 03 ff 03 01 08 ff 00 88 ff ff ff ff
[ 4.291711] saa7133[0]: board init: gpio is 63f00
[ 45.755449] saa7130[0]: i2c eeprom 30: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[ 4.291720] IRQ 17/saa7133[0]: IRQF_DISABLED is not guaranteed on shared IRQs
[ 45.755454] saa7130[0]: i2c eeprom 40: ff d5 00 c4 86 1e ff ff ff ff ff ff ff ff ff ff
[ 45.755460] saa7130[0]: i2c eeprom 50: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff cb
[ 4.433016] saa7133[0]: i2c eeprom 00: 5b 18 00 c9 54 20 1c 00 43 43 a9 1c 55 d2 b2 92
[ 45.755466] saa7130[0]: i2c eeprom 60: 30 ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[ 4.433022] saa7133[0]: i2c eeprom 10: 00 ff 86 0f ff 20 ff ff ff ff ff ff ff ff ff ff
[ 45.755471] saa7130[0]: i2c eeprom 70: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[ 4.433027] saa7133[0]: i2c eeprom 20: 01 40 01 02 02 03 01 03 08 ff 00 89 ff ff ff ff
[ 4.433032] saa7133[0]: i2c eeprom 30: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[ 45.755478] saa7130[0]: Unexpected tuner type info: d5 in eeprom
[ 4.433036] saa7133[0]: i2c eeprom 40: ff da 00 c6 86 ff ff ff 03 ff ff ff c6 ff 04 11
[ 45.755532] saa7130[0]: registered device video0 [v4l2]
[ 4.433041] saa7133[0]: i2c eeprom 50: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff cb
[ 45.755550] saa7130[0]: registered device vbi0
[ 4.433045] saa7133[0]: i2c eeprom 60: 35 ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[ 45.873425] saa7134 ALSA driver for DMA sound loaded
[ 4.433049] saa7133[0]: i2c eeprom 70: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[ 45.873448] saa7130[0]/alsa: saa7130[0] at 0xfdcfe000 irq 20 registered as card -2
[ 4.433054] saa7133[0]: i2c eeprom 80: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[ 45.943354] saa7130[0]/dvb: frontend initialization failed
[ 4.433058] saa7133[0]: i2c eeprom 90: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[ 4.433062] saa7133[0]: i2c eeprom a0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[ 4.433067] saa7133[0]: i2c eeprom b0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[ 4.433071] saa7133[0]: i2c eeprom c0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[ 4.433075] saa7133[0]: i2c eeprom d0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[ 4.433080] saa7133[0]: i2c eeprom e0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[ 4.433084] saa7133[0]: i2c eeprom f0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[ 4.446016] saa7133[0]: i2c scan: found device @ 0xa0 [eeprom]
[ 4.450016] saa7133[0]: i2c scan: found device @ 0xc0 [tuner (analog)]
[ 4.452016] saa7133[0]: i2c scan: found device @ 0xc6 [???]
[ 4.574187] tuner 1-0060: chip found @ 0xc0 (saa7133[0])
[ 4.574232] tea5767 1-0060: type set to Philips TEA5767HN FM Radio
[ 4.580535] saa7133[0]: registered device video0 [v4l2]
[ 4.580551] saa7133[0]: registered device vbi0
[ 4.580566] saa7133[0]: registered device radio0
[ 4.583456] saa7134 ALSA driver for DMA sound loaded
[ 4.583462] IRQ 17/saa7133[0]: IRQF_DISABLED is not guaranteed on shared IRQs
[ 4.583476] saa7133[0]/alsa: saa7133[0] at 0xfeaff800 irq 17 registered as card -1


===Remote Control Support===
===Remote Control Support===

Revision as of 05:24, 15 June 2010

Example Image: Add a good overall image of what the device looks like here and perhaps a very brief description


This article is a stub or is incomplete.
This article requires expansion. Please help add informative information if you can.


An ATSC PCI card from Compro_Technology.

Overview/Features

  • PCI interface
  • Inputs: Antenna (Composite), Remote and S-Video In

Components Used

Other Images

Identification

# lspci -vvvnn
01:07.0 Multimedia controller [0480]: Philips Semiconductors SAA7131/SAA7133/SAA7135 Video Broadcast Decoder [1131:7133] (rev d1)
       Subsystem: Compro Technology, Inc. VideoMate T750 [185b:c900]
       Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
       Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
       Latency: 64 (21000ns min, 8000ns max)
       Interrupt: pin A routed to IRQ 17
       Region 0: Memory at feaff800 (32-bit, non-prefetchable) [size=2K]
       Capabilities: [40] Power Management version 2
               Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
               Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=1 PME-
       Kernel driver in use: saa7134

Making it Work

Is it supported under Linux? Are there experimental drivers? Does it partially work or identify as another card? (if yes, add this information below)

Firmware

No firmware is needed for this card.

Drivers

Provide the details of where the drivers and patches and necessary tools are available.

Sample Kernel Output

# dmesg
[    4.213572] Linux video capture interface: v2.00
[    4.291311] saa7130/34: v4l2 driver version 0.2.15 loaded
[    4.291667] ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 17
[    4.291670]   alloc irq_desc for 17 on node -1
[    4.291672]   alloc kstat_irqs on node -1
[    4.291680] saa7134 0000:01:07.0: PCI INT A -> Link[LNKB] -> GSI 17 (level, low) -> IRQ 17
[    4.291684] saa7133[0]: found at 0000:01:07.0, rev: 209, irq: 17, latency: 64, mmio: 0xfeaff800
[    4.291689] saa7133[0]: subsystem: 185b:c900, board: Compro VideoMate T750 [card=139,autodetected]
[    4.291711] saa7133[0]: board init: gpio is 63f00
[    4.291720] IRQ 17/saa7133[0]: IRQF_DISABLED is not guaranteed on shared IRQs
[    4.433016] saa7133[0]: i2c eeprom 00: 5b 18 00 c9 54 20 1c 00 43 43 a9 1c 55 d2 b2 92
[    4.433022] saa7133[0]: i2c eeprom 10: 00 ff 86 0f ff 20 ff ff ff ff ff ff ff ff ff ff
[    4.433027] saa7133[0]: i2c eeprom 20: 01 40 01 02 02 03 01 03 08 ff 00 89 ff ff ff ff
[    4.433032] saa7133[0]: i2c eeprom 30: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[    4.433036] saa7133[0]: i2c eeprom 40: ff da 00 c6 86 ff ff ff 03 ff ff ff c6 ff 04 11
[    4.433041] saa7133[0]: i2c eeprom 50: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff cb
[    4.433045] saa7133[0]: i2c eeprom 60: 35 ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[    4.433049] saa7133[0]: i2c eeprom 70: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[    4.433054] saa7133[0]: i2c eeprom 80: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[    4.433058] saa7133[0]: i2c eeprom 90: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[    4.433062] saa7133[0]: i2c eeprom a0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[    4.433067] saa7133[0]: i2c eeprom b0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[    4.433071] saa7133[0]: i2c eeprom c0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[    4.433075] saa7133[0]: i2c eeprom d0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[    4.433080] saa7133[0]: i2c eeprom e0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[    4.433084] saa7133[0]: i2c eeprom f0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[    4.446016] saa7133[0]: i2c scan: found device @ 0xa0  [eeprom]
[    4.450016] saa7133[0]: i2c scan: found device @ 0xc0  [tuner (analog)]
[    4.452016] saa7133[0]: i2c scan: found device @ 0xc6  [???]
[    4.574187] tuner 1-0060: chip found @ 0xc0 (saa7133[0])
[    4.574232] tea5767 1-0060: type set to Philips TEA5767HN FM Radio
[    4.580535] saa7133[0]: registered device video0 [v4l2]
[    4.580551] saa7133[0]: registered device vbi0
[    4.580566] saa7133[0]: registered device radio0
[    4.583456] saa7134 ALSA driver for DMA sound loaded
[    4.583462] IRQ 17/saa7133[0]: IRQF_DISABLED is not guaranteed on shared IRQs
[    4.583476] saa7133[0]/alsa: saa7133[0] at 0xfeaff800 irq 17 registered as card -1

Remote Control Support

The remote control included is a Windows Media Center-compatible RC-6 is the same as the one of the K100 kit sold by Compro but with a receiver integrated into the card instead of an USB one.

External Links