Conexant Fusion 878A: Difference between revisions

From LinuxTVWiki
Jump to navigation Jump to search
mNo edit summary
m (minor rewording)
Line 1: Line 1:
An updated version of the [[Brooktree Bt878|Bt878]] (which under the Conexant banner was also sometimes known or referred to as the '''''Fusion Bt878'''''). With the Fusion 878A's release, the "Bt" (for Brooktree) was dropped from the product nomenclature.
An updated version of the former [[Brooktree Bt878|Bt878]] chipset (which, upon coming under the Conexant banner, was also sometimes known or referred to as the '''''Fusion Bt878'''''). With the newer Fusion 878A's release, the "Bt" (for Brooktree) was dropped from the product nomenclature.


One of the updates included the adding of support for the handling of MPEG2 TS used by DTV services.
One of the updates included the adding of support for the handling of MPEG2 TS used by DTV services.
Line 6: Line 6:




{{Note|lspci output is slightly misleading in that it identifies the 878A chipset by name of the [[Brooktree Bt878|Bt878]] chipset, however, that name should be reserved for the older chips which only supported analog applications and lacked facilities for digital TV applications. In otherwords, if you have a digitalTV device, you can be certain that the chip is actually the Fusion 878A, and not the older Bt878}}
{{Note|lspci output is slightly misleading in that it identifies the 878A chipset by name of the [[Brooktree Bt878|Bt878]] chipset, e.g.:
:0000:02:05.0 Multimedia video controller: Brooktree Corporation Bt878 Video Capture (rev 11)
However, the ''Bt878'' name should be reserved for the older chips which only supported analog applications and lacked facilities for digital TV applications. In otherwords, if you have a 878-based digitalTV device, you can be certain that the chip is actually the Fusion 878A, and not the older Bt878}}

Revision as of 15:59, 30 August 2007

An updated version of the former Bt878 chipset (which, upon coming under the Conexant banner, was also sometimes known or referred to as the Fusion Bt878). With the newer Fusion 878A's release, the "Bt" (for Brooktree) was dropped from the product nomenclature.

One of the updates included the adding of support for the handling of MPEG2 TS used by DTV services.

insert Bt87x vs 878A comparison table here


Note: lspci output is slightly misleading in that it identifies the 878A chipset by name of the Bt878 chipset, e.g.:
0000:02:05.0 Multimedia video controller: Brooktree Corporation Bt878 Video Capture (rev 11)
However, the Bt878 name should be reserved for the older chips which only supported analog applications and lacked facilities for digital TV applications. In otherwords, if you have a 878-based digitalTV device, you can be certain that the chip is actually the Fusion 878A, and not the older Bt878