DVBSky S952: Difference between revisions

From LinuxTVWiki
Jump to navigation Jump to search
Line 28: Line 28:
== Warning ==
== Warning ==


The driver seems to have some issues:
The driver seems to have some configuration issues:
http://code.mythtv.org/trac/ticket/10830
http://code.mythtv.org/trac/ticket/10830


Line 34: Line 34:


The card needs a power supply other than the one provided by the PCIe, so there is a plug on the card. It can not work if not connected.
The card needs a power supply other than the one provided by the PCIe, so there is a plug on the card. It can not work if not connected.

If configured properly, card works really well under MythTV 0.25.2 & Unicable.


== Firmware ==
== Firmware ==

Revision as of 11:38, 13 August 2012

DVB-S/S2 PCIe card from DVBSKy

Features

  • Dual/Twin Tuner input
  • PCIe x1
  • Low power
  • External Power by PCI Express 6-Position Power Connector

Components Used

  • RF: Montage M88TS2020
  • Demodulator: 2nd generation Montage M88DS3103
  • PCIe Bridge: Conexant CX23885

Driver

Officially here, with firmware : http://www.dvbsky.net/Support.html

You have an howto in french here for debian : http://wiki.debian-facile.org/manuel:installation:dvb:dvbs2:dvbsky

and an active mailling list from a reseller here : http://www.dvbshop24.com/index.php/topic,9513.90.html

For users preferring minimally-intrusive kernel tree patching + recompile over installing separate V4L (as second approach is potentially risk if You have other tuners in system which are not covered by media build V4L instance) here are patches for 3.3.x & 3.5.x kernels [1]

Warning

The driver seems to have some configuration issues: http://code.mythtv.org/trac/ticket/10830

Also reported problem with openelec

The card needs a power supply other than the one provided by the PCIe, so there is a plug on the card. It can not work if not connected.

If configured properly, card works really well under MythTV 0.25.2 & Unicable.

Firmware

  • dvb-fe-ds3103.fw

Picture