DVBSky T9580: Difference between revisions
Jump to navigation
Jump to search
No edit summary |
|||
| Line 1: | Line 1: | ||
A combined [[DVB-T]]/[[DVB-T2]] or [[DVB-C]] or [[DVB-S]]/[[DVB-S2]] [[PCIe|PCIe card]] from [ |
A combined [[DVB-T]]/[[DVB-T2]] or [[DVB-C]] or [[DVB-S]]/[[DVB-S2]] [[PCIe|PCIe card]] from [[DVBSky]]. |
||
The card is identical to '''Mystique SaTeCaBiX'''. |
The card is identical to '''Mystique SaTeCaBiX'''. |
||
| Line 38: | Line 38: | ||
<br/><br/><br/> |
<br/><br/><br/> |
||
== |
==Driver and firmware== |
||
*See [[DVBSky]] wiki page. Execute build_{x86|x64}_dvbc.sh for DVB-C driver! |
|||
*Firmware: dvb-fe-ds3103.fw |
|||
There is no open source driver in mainline kernel for this card. |
|||
But Linux drivers can be downloaded from the DVBSky support website. |
|||
Most of the driver is open source, except the driver for the Si2168 chipset. This is only a proprietary closed source module called sit2.o and is shipping |
|||
for 32 Bit and 64 Bit Linux Kernels with and without DVB-C support. |
|||
==Making it Work== |
==Making it Work== |
||
Revision as of 13:48, 4 December 2013
A combined DVB-T/DVB-T2 or DVB-C or DVB-S/DVB-S2 PCIe card from DVBSky.
The card is identical to Mystique SaTeCaBiX.
Overview/Features
- PCI-e x1 low profile card
- Single Tuner DVB-S/DVB-S2 card
- Single Tuner DVB-T/DVB-T2/DVB-C card
- IR Receiver
- Remote Controller
Identification
$ dmesg | grep -i dvb [ 14.236542] CORE cx23885[0]: subsystem: 4254:9580, board: DVBSKY T9580 [card=45,autodetected] [ 15.166644] cx23885_dvb_register() allocating 1 frontend(s) [ 15.166649] cx23885[0]: cx23885 based dvb card [ 15.278935] m88ds3103_load_firmware: Waiting for firmware upload (dvb-fe-ds3103.fw)... [ 16.207179] DVB: registering new adapter (cx23885[0]) [ 16.207183] cx23885 0000:02:00.0: DVB: registering adapter 0 frontend 0 (Montage DS3103/TS2022)... [ 16.234648] DVBSKY PCIe MAC= 00:17:42:54:09:82 [ 16.234650] cx23885_dvb_register() allocating 1 frontend(s) [ 16.234652] cx23885[0]: cx23885 based dvb card [ 16.235747] DVB: registering new adapter (cx23885[0]) [ 16.235752] cx23885 0000:02:00.0: DVB: registering adapter 1 frontend 0 (Sit2 DVB-T2/C)... [ 16.263166] DVBSKY PCIe MAC= 00:18:42:54:09:83 [ 16.287996] Registered IR keymap rc-dvbsky [ 16.288073] input: cx23885 IR (DVBSKY T9580) as /devices/pci0000:00/0000:00:04.0/0000:02:00.0/rc/rc0/input15 [ 16.291630] rc0: cx23885 IR (DVBSKY T9580) as /devices/pci0000:00/0000:00:04.0/0000:02:00.0/rc/rc0
Technical Details
- Name: T9850/5950 Ver. 1.0a 121106
- Chip : Conexant PCIe A/V Decoder CX23885-15Z PFAC6621B 1249CN
- Chip : Si2168 30 1253A00081 (for DVB-C/DVB-T/DVB-T2)
- Chip : M88DS3103 4K51188.1 FPC1221NQ (for DVB-S/DVB-S2)
- The card is identical to Mystique SaTeCaBiX
Driver and firmware
- See DVBSky wiki page. Execute build_{x86|x64}_dvbc.sh for DVB-C driver!
- Firmware: dvb-fe-ds3103.fw
Making it Work
As of October 2013 it is not working with Kubuntu 13.10 and the media_build_bst_130806 Drivers from DVBSky according DVB-C.
The driver is loading and detecting the card, but more then a successful channel scan isn't possible.
No TV program can be watched. DVB-S/DVB-S2 and DVB-T/DVB-T2 wasn't tested by me.
Cable Working for Ubuntu 12.04 an 13.04
November 2013, made the patch working
Sat driver loaded but not tested
Cable driver loaded and tested, works fine with tvheadend and XBMC
For a manual look at http://members.quicknet.nl/pe63/DVBSky-T9580.html
lspci output for this card is:
05:00.0 Multimedia video controller [0400]: Conexant Systems, Inc. CX23885 PCI Video and Audio Decoder [14f1:8852] (rev 04)
Subsystem: Device [4254:9580]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 14
Region 0: Memory at f7800000 (64-bit, non-prefetchable)
Capabilities: [40] Express (v1) Endpoint, MSI 00
DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us
ExtTag- AttnBtn- AttnInd- PwrInd- RBE- FLReset-
DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop+
MaxPayload 128 bytes, MaxReadReq 512 bytes
DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend-
LnkCap: Port #0, Speed 2.5GT/s, Width x1, ASPM L0s L1, Latency L0 <2us, L1 <4us
ClockPM- Surprise- LLActRep- BwNot-
LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk+
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
Capabilities: [80] Power Management version 2
Flags: PMEClk- DSI+ D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold-)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [90] Vital Product Data
Product Name: "
End
Capabilities: [a0] MSI: Enable- Count=1/1 Maskable- 64bit+
Address: 0000000000000000 Data: 0000
Capabilities: [100 v1] Advanced Error Reporting
UESta: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
UEMsk: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
UESvrt: DLP+ SDES- TLP- FCP+ CmpltTO- CmpltAbrt- UnxCmplt- RxOF+ MalfTLP+ ECRC- UnsupReq- ACSViol-
CESta: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr-
CEMsk: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr-
AERCap: First Error Pointer: 00, GenCap- CGenEn- ChkCap- ChkEn-
Capabilities: [200 v1] Virtual Channel
Caps: LPEVC=0 RefClk=100ns PATEntryBits=1
Arb: Fixed+ WRR32+ WRR64+ WRR128-
Ctrl: ArbSelect=WRR64
Status: InProgress-
Port Arbitration Table [240] <?>
VC0: Caps: PATOffset=00 MaxTimeSlots=1 RejSnoopTrans-
Arb: Fixed- WRR32- WRR64- WRR128- TWRR128- WRR256-
Ctrl: Enable+ ID=0 ArbSelect=Fixed TC/VC=01
Status: NegoPending- InProgress-
Kernel driver in use: cx23885
Please feel free to correct this.
Update:
Works
Today I test this card with both DVB-S/S2 and DVB-T in Timisoara - Romania (DVB-T signal from Hungary - Szentes). I try to receive DVB-T2 signal from Serbia (Avala or Crveni Cot) but I don't receive any signal, maybe card doesn't work with DVB-T2 or my antenna doesn't receive any signal. I use VDR 2.1.2 with streamdev as back-end and VLC to watch channels and work very well, both adapter. I try w_scan and work.
I use latest driver from dvbsky website.