Difference between revisions of "DVBSky T9580"

From LinuxTVWiki
Jump to: navigation, search
(Technical Details)
m (Making it Work)
 
(64 intermediate revisions by 8 users not shown)
Line 1: Line 1:
A combined [[DVB-T]]/[[DVB-T2]] or [[DVB-C]] or [[DVB-S]]/[[DVB-S2]] [[PCIe|PCIe card]] from [http://www.dvbsky.net/ DVBSky].
+
A combined [[DVB-T]]/[[DVB-T2]] or [[DVB-C]] or [[DVB-S]]/[[DVB-S2]] [[PCIe|PCIe card]] from [[DVBSky]].
 +
 
 +
The card is identical to '''Mystique SaTeCaBiX'''.
  
 
==Overview/Features==
 
==Overview/Features==
  
* PCI-e x1 low profile card
+
* PCI-e x1 low profile card (includes standard profile backplate)
* Single Tuner DVB-S/DVB-S2 card
+
* Single Tuner for DVB-S/DVB-S2  
* Single Tuner DVB-T/DVB-T2/DVB-C card
+
* Single Tuner for DVB-T/DVB-T2/DVB-C
 
* IR Receiver
 
* IR Receiver
 
* Remote Controller
 
* Remote Controller
 
===Identification===
 
 
  Device: 14f1:8852 (rev 04)
 
  Subystem: Device 4254:9580
 
  
 
===Technical Details===
 
===Technical Details===
  
 
* Name: T9850/5950 Ver. 1.0a 121106
 
* Name: T9850/5950 Ver. 1.0a 121106
* Chip : [[Conexant]] PCIe A/V Decoder CX23885-15Z PFAC6621B 1249CN
+
* Bridge : [[Conexant]] PCIe A/V Decoder [[Conexant_CX23885/7/8|CX23885-15Z]] PFAC6621B 1249CN
* Chip : [http://www.silabs.com/products/video/demodulator/pages/si2168.aspx Si2168] 30 1253A00081 (for DVB-C/DVB-T/DVB-T2)
+
* DVB-T2/C demodulator : [[Silicon_Labs_si2168|Si2168]]-A30
* Chip : M88DS3103 4K51188.1 FPC1221NQ (for DVB-S/DVB-S2)
+
* DVB-T2/C tuner : [[Silicon_Labs_Si2157|Si2158]]-A20
* '''The card is identical to Mystique SaTeCaBiX'''
+
* DVB-S2 demodulator : Montage M88DS3103
<br/><br/><br/>
+
* DVB-S2 tuner : Montage TS2022
 +
* PCI ID 4254:9580 (same for the Mystique card)
 +
<br/>
 +
* Name: T9850 Ver. 3 (there's no version 2)
 +
* Bridge : SMI PCIe
 +
* DVB-T2/C demodulator : [[Silicon_Labs_si2168|Si2168]]-B40
 +
* DVB-T2/C tuner : [[Silicon_Labs_Si2157|Si2157]]-A30
 +
* DVB-S2 demodulator : Montage M88DS3103
 +
* DVB-S2 tuner : Montage TS2022
 +
* PCI ID 4254:5580
 +
<br/><br/>
  
=== Drivers ===
+
==Driver and firmware==
  
There is no open source driver in mainline kernel for this card.
+
* Following firmware files are needed for version 1: dvb-demod-m88ds3103.fw, dvb-demod-si2168-a30-01.fw and dvb-tuner-si2158-a20-01.fw.  
But linux drivers can be downloaded from the DVBSky support website.
+
* And for version 3: dvb-demod-m88ds3103.fw, dvb-demod-si2168-b40-01.fw
 +
* All can be found from OpenELEC firmware tree [https://github.com/OpenELEC/dvb-firmware/tree/master/firmware].
 +
* As an alternative, you can get the firmware from the producer's site: http://www.dvbsky.net/Support_linux.html
 +
* Place the firmware files under /lib/firmware
  
Most of the driver is open source, except the driver for the Si2168 chipset. This is only a propritary closed source module called sit2.o and is shipping
+
==Making it Work ==
for 32 Bit and 64 Bit Linux Kernels with and without DVB-C support.
+
+
  
==Making it Work==
+
The driver is included in Linux kernels since 3.18 (ver 1) and 3.19 (ver 3). For older kernels you can use the [[media_build]].
As of October 2013 it is not working with Kubuntu 13.10 and the media_build_bst_130806 Drivers from DVBSky according DVB-C.
+
  
The driver is loading and detectiing the card, but more then a sucessful channel scan isn't possible.
+
dmesg output when version 1 board is detected:
  
No TV program can be watched.
+
<pre>
 +
[39628.129977] cx23885 driver version 0.0.3 loaded
 +
[39628.130057] CORE cx23885[0]: subsystem: 4254:9580, board: DVBSky T9580 [card=45,autodetected]
 +
[39628.358270] cx25840 2-0044: cx23885 A/V decoder found @ 0x88 (cx23885[0])
 +
[39628.991041] cx25840 2-0044: loaded v4l-cx23885-avcore-01.fw firmware (16382 bytes)
 +
[39629.006791] cx23885_dvb_register() allocating 1 frontend(s)
 +
[39629.006793] cx23885[0]: cx23885 based dvb card
 +
[39629.010119] i2c i2c-1: Added multiplexed i2c bus 12
 +
[39629.116211] m88ts2022 12-0060: m88ts2022: Montage M88TS2022 successfully identified
 +
[39629.116217] DVB: registering new adapter (cx23885[0])
 +
[39629.116220] cx23885 0000:02:00.0: DVB: registering adapter 0 frontend 0 (Montage M88DS3103)...
 +
[39629.144175] DVBSky T9580 port 1 MAC address: 00:17:42:54:09:82
 +
[39629.144177] cx23885_dvb_register() allocating 1 frontend(s)
 +
[39629.144178] cx23885[0]: cx23885 based dvb card
 +
[39629.145080] i2c i2c-0: Added multiplexed i2c bus 13
 +
[39629.145083] si2168 0-0064: si2168: Silicon Labs Si2168 successfully attached
 +
[39629.147038] si2157 13-0060: si2157: Silicon Labs Si2157/Si2158 successfully attached
 +
[39629.147043] DVB: registering new adapter (cx23885[0])
 +
[39629.147045] cx23885 0000:02:00.0: DVB: registering adapter 1 frontend 0 (Silicon Labs Si2168)...
 +
[39629.174892] DVBSky T9580 port 2 MAC address: 00:18:42:54:09:83
 +
[39629.174896] cx23885_dev_checkrevision() Hardware revision = 0xa5
 +
[39629.174901] cx23885[0]/0: found at 0000:02:00.0, rev: 4, irq: 16, latency: 0, mmio: 0xf7a00000
 +
[39646.479572] si2168 0-0064: si2168: found a 'Silicon Labs Si2168' in cold state
 +
[39646.479596] si2168 0-0064: si2168: downloading firmware from file 'dvb-demod-si2168-a30-01.fw'
 +
[39649.538399] si2168 0-0064: si2168: found a 'Silicon Labs Si2168' in warm state
 +
[39649.546988] si2157 13-0060: si2157: found a 'Silicon Labs Si2157/Si2158' in cold state
 +
[39649.547002] si2157 13-0060: si2157: downloading firmware from file 'dvb-tuner-si2158-a20-01.fw'
 +
[39655.010407] i2c i2c-1: m88ds3103: downloading firmware from file 'dvb-demod-m88ds3103.fw'
 +
[39655.925117] i2c i2c-1: m88ds3103: found a 'Montage M88DS3103' in warm state
 +
[39655.925120] i2c i2c-1: m88ds3103: firmware version 3.B
 +
</pre>
  
DVB-S/DVB-S2 and DVB-T/DVB-T2 wasn't testet by me.
+
==DVBSky T9580 v3==
 +
This version uses a different kernel module - smipcie. Here's the dmesg output from a 4.3 kernel:
  
<br/>
+
<pre>
<br/>
+
[220720.495204] SMI PCIe driver 0000:03:00.0: card detected: DVBSky T9580 V3
 
+
[220720.588098] DVB: registering new adapter (SMI_DVB)
lspci output for this card is:
+
[220720.590320] i2c i2c-4: Added multiplexed i2c bus 6
 
+
[220720.590325] si2168 4-0064: Silicon Labs Si2168 successfully attached
  05:00.0 Multimedia video controller [0400]: Conexant Systems, Inc. CX23885 PCI Video and Audio Decoder [14f1:8852] (rev 04)
+
[220720.594971] si2157 6-0060: Silicon Labs Si2147/2148/2157/2158 successfully attached
        Subsystem: Device [4254:9580]
+
[220720.594979] SMI PCIe driver 0000:03:00.0: DVB: registering adapter 0 frontend 0 (Silicon Labs Si2168)...
        Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
+
[220720.601255] SMI PCIe driver 0000:03:00.0: DVBSky SMI PCIe MAC= 00:18:33:34:85:51
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
+
[220720.601321] DVB: registering new adapter (SMI_DVB)
        Latency: 0, Cache Line Size: 64 bytes
+
[220720.610573] i2c i2c-5: Added multiplexed i2c bus 7
        Interrupt: pin A routed to IRQ 14
+
[220720.692837] ts2020 7-0060: Montage Technology TS2022 successfully identified
        Region 0: Memory at f7800000 (64-bit, non-prefetchable)
+
[220720.692857] SMI PCIe driver 0000:03:00.0: DVB: registering adapter 1 frontend 0 (Montage Technology M88DS3103)...
        Capabilities: [40] Express (v1) Endpoint, MSI 00
+
[220720.699209] SMI PCIe driver 0000:03:00.0: DVBSky SMI PCIe MAC= 00:18:33:54:85:52
                DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us
+
[220720.699217] Registered IR keymap rc-dvbsky
                        ExtTag- AttnBtn- AttnInd- PwrInd- RBE- FLReset-
+
[220720.699277] input: IR (DVBSky T9580 V3) as /devices/pci0000:00/0000:00:05.0/0000:03:00.0/rc/rc0/input19
                DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
+
[220720.699312] rc0: IR (DVBSky T9580 V3) as /devices/pci0000:00/0000:00:05.0/0000:03:00.0/rc/rc0
                        RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop+
+
[220742.932523] si2168 4-0064: found a 'Silicon Labs Si2168-B40'
                        MaxPayload 128 bytes, MaxReadReq 512 bytes
+
[220742.932569] si2168 4-0064: downloading firmware from file 'dvb-demod-si2168-b40-01.fw'
                DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend-
+
[220744.573071] si2168 4-0064: firmware version: 4.0.11
                LnkCap: Port #0, Speed 2.5GT/s, Width x1, ASPM L0s L1, Latency L0 <2us, L1 <4us
+
[220744.596881] si2157 6-0060: found a 'Silicon Labs Si2157-A30'
                        ClockPM- Surprise- LLActRep- BwNot-
+
[220744.631006] si2157 6-0060: firmware version: 3.0.5
                LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk+
+
</pre>
                        ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
+
                LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
+
        Capabilities: [80] Power Management version 2
+
                Flags: PMEClk- DSI+ D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold-)
+
                Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
+
        Capabilities: [90] Vital Product Data
+
                Product Name: "
+
                End
+
        Capabilities: [a0] MSI: Enable- Count=1/1 Maskable- 64bit+
+
                Address: 0000000000000000  Data: 0000
+
        Capabilities: [100 v1] Advanced Error Reporting
+
                UESta:  DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
+
                UEMsk: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
+
                UESvrt: DLP+ SDES- TLP- FCP+ CmpltTO- CmpltAbrt- UnxCmplt- RxOF+ MalfTLP+ ECRC- UnsupReq- ACSViol-
+
                CESta: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr-
+
                CEMsk: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr-
+
                AERCap: First Error Pointer: 00, GenCap- CGenEn- ChkCap- ChkEn-
+
        Capabilities: [200 v1] Virtual Channel
+
                Caps:   LPEVC=0 RefClk=100ns PATEntryBits=1
+
                Arb:   Fixed+ WRR32+ WRR64+ WRR128-
+
                Ctrl:   ArbSelect=WRR64
+
                Status: InProgress-
+
                Port Arbitration Table [240] <?>
+
                VC0:    Caps:  PATOffset=00 MaxTimeSlots=1 RejSnoopTrans-
+
                        Arb:   Fixed- WRR32- WRR64- WRR128- TWRR128- WRR256-
+
                        Ctrl:   Enable+ ID=0 ArbSelect=Fixed TC/VC=01
+
                        Status: NegoPending- InProgress-
+
        Kernel driver in use: cx23885
+
 
+
<br/>
+
<br/>
+
Please feel free to correct this.
+
  
 
==External Links==
 
==External Links==

Latest revision as of 08:38, 4 March 2016

A combined DVB-T/DVB-T2 or DVB-C or DVB-S/DVB-S2 PCIe card from DVBSky.

The card is identical to Mystique SaTeCaBiX.

Overview/Features

  • PCI-e x1 low profile card (includes standard profile backplate)
  • Single Tuner for DVB-S/DVB-S2
  • Single Tuner for DVB-T/DVB-T2/DVB-C
  • IR Receiver
  • Remote Controller

Technical Details

  • Name: T9850/5950 Ver. 1.0a 121106
  • Bridge : Conexant PCIe A/V Decoder CX23885-15Z PFAC6621B 1249CN
  • DVB-T2/C demodulator : Si2168-A30
  • DVB-T2/C tuner : Si2158-A20
  • DVB-S2 demodulator : Montage M88DS3103
  • DVB-S2 tuner : Montage TS2022
  • PCI ID 4254:9580 (same for the Mystique card)


  • Name: T9850 Ver. 3 (there's no version 2)
  • Bridge : SMI PCIe
  • DVB-T2/C demodulator : Si2168-B40
  • DVB-T2/C tuner : Si2157-A30
  • DVB-S2 demodulator : Montage M88DS3103
  • DVB-S2 tuner : Montage TS2022
  • PCI ID 4254:5580



Driver and firmware

  • Following firmware files are needed for version 1: dvb-demod-m88ds3103.fw, dvb-demod-si2168-a30-01.fw and dvb-tuner-si2158-a20-01.fw.
  • And for version 3: dvb-demod-m88ds3103.fw, dvb-demod-si2168-b40-01.fw
  • All can be found from OpenELEC firmware tree [1].
  • As an alternative, you can get the firmware from the producer's site: http://www.dvbsky.net/Support_linux.html
  • Place the firmware files under /lib/firmware

Making it Work

The driver is included in Linux kernels since 3.18 (ver 1) and 3.19 (ver 3). For older kernels you can use the media_build.

dmesg output when version 1 board is detected:

[39628.129977] cx23885 driver version 0.0.3 loaded
[39628.130057] CORE cx23885[0]: subsystem: 4254:9580, board: DVBSky T9580 [card=45,autodetected]
[39628.358270] cx25840 2-0044: cx23885 A/V decoder found @ 0x88 (cx23885[0])
[39628.991041] cx25840 2-0044: loaded v4l-cx23885-avcore-01.fw firmware (16382 bytes)
[39629.006791] cx23885_dvb_register() allocating 1 frontend(s)
[39629.006793] cx23885[0]: cx23885 based dvb card
[39629.010119] i2c i2c-1: Added multiplexed i2c bus 12
[39629.116211] m88ts2022 12-0060: m88ts2022: Montage M88TS2022 successfully identified
[39629.116217] DVB: registering new adapter (cx23885[0])
[39629.116220] cx23885 0000:02:00.0: DVB: registering adapter 0 frontend 0 (Montage M88DS3103)...
[39629.144175] DVBSky T9580 port 1 MAC address: 00:17:42:54:09:82
[39629.144177] cx23885_dvb_register() allocating 1 frontend(s)
[39629.144178] cx23885[0]: cx23885 based dvb card
[39629.145080] i2c i2c-0: Added multiplexed i2c bus 13
[39629.145083] si2168 0-0064: si2168: Silicon Labs Si2168 successfully attached
[39629.147038] si2157 13-0060: si2157: Silicon Labs Si2157/Si2158 successfully attached
[39629.147043] DVB: registering new adapter (cx23885[0])
[39629.147045] cx23885 0000:02:00.0: DVB: registering adapter 1 frontend 0 (Silicon Labs Si2168)...
[39629.174892] DVBSky T9580 port 2 MAC address: 00:18:42:54:09:83
[39629.174896] cx23885_dev_checkrevision() Hardware revision = 0xa5
[39629.174901] cx23885[0]/0: found at 0000:02:00.0, rev: 4, irq: 16, latency: 0, mmio: 0xf7a00000
[39646.479572] si2168 0-0064: si2168: found a 'Silicon Labs Si2168' in cold state
[39646.479596] si2168 0-0064: si2168: downloading firmware from file 'dvb-demod-si2168-a30-01.fw'
[39649.538399] si2168 0-0064: si2168: found a 'Silicon Labs Si2168' in warm state
[39649.546988] si2157 13-0060: si2157: found a 'Silicon Labs Si2157/Si2158' in cold state
[39649.547002] si2157 13-0060: si2157: downloading firmware from file 'dvb-tuner-si2158-a20-01.fw'
[39655.010407] i2c i2c-1: m88ds3103: downloading firmware from file 'dvb-demod-m88ds3103.fw'
[39655.925117] i2c i2c-1: m88ds3103: found a 'Montage M88DS3103' in warm state
[39655.925120] i2c i2c-1: m88ds3103: firmware version 3.B

DVBSky T9580 v3

This version uses a different kernel module - smipcie. Here's the dmesg output from a 4.3 kernel:

[220720.495204] SMI PCIe driver 0000:03:00.0: card detected: DVBSky T9580 V3
[220720.588098] DVB: registering new adapter (SMI_DVB)
[220720.590320] i2c i2c-4: Added multiplexed i2c bus 6
[220720.590325] si2168 4-0064: Silicon Labs Si2168 successfully attached
[220720.594971] si2157 6-0060: Silicon Labs Si2147/2148/2157/2158 successfully attached
[220720.594979] SMI PCIe driver 0000:03:00.0: DVB: registering adapter 0 frontend 0 (Silicon Labs Si2168)...
[220720.601255] SMI PCIe driver 0000:03:00.0: DVBSky SMI PCIe MAC= 00:18:33:34:85:51
[220720.601321] DVB: registering new adapter (SMI_DVB)
[220720.610573] i2c i2c-5: Added multiplexed i2c bus 7
[220720.692837] ts2020 7-0060: Montage Technology TS2022 successfully identified
[220720.692857] SMI PCIe driver 0000:03:00.0: DVB: registering adapter 1 frontend 0 (Montage Technology M88DS3103)...
[220720.699209] SMI PCIe driver 0000:03:00.0: DVBSky SMI PCIe MAC= 00:18:33:54:85:52
[220720.699217] Registered IR keymap rc-dvbsky
[220720.699277] input: IR (DVBSky T9580 V3) as /devices/pci0000:00/0000:00:05.0/0000:03:00.0/rc/rc0/input19
[220720.699312] rc0: IR (DVBSky T9580 V3) as /devices/pci0000:00/0000:00:05.0/0000:03:00.0/rc/rc0
[220742.932523] si2168 4-0064: found a 'Silicon Labs Si2168-B40'
[220742.932569] si2168 4-0064: downloading firmware from file 'dvb-demod-si2168-b40-01.fw'
[220744.573071] si2168 4-0064: firmware version: 4.0.11
[220744.596881] si2157 6-0060: found a 'Silicon Labs Si2157-A30'
[220744.631006] si2157 6-0060: firmware version: 3.0.5

External Links