Difference between revisions of "DVBv5 Tools"

From LinuxTVWiki
Jump to: navigation, search
(dvbv5-scan)
Line 31: Line 31:
 
The dvbv5-scan tool is smart enough to retrieve the information at the MPEG-TS Network Information Table (NIT) about other channels available on the stream.
 
The dvbv5-scan tool is smart enough to retrieve the information at the MPEG-TS Network Information Table (NIT) about other channels available on the stream.
  
Example:
+
Example:
  
 
  $ dvbv5-scan ~/dvbc-test
 
  $ dvbv5-scan ~/dvbc-test
Line 45: Line 45:
 
  ...
 
  ...
 
  New transponder/channel found: #39: 507000000
 
  New transponder/channel found: #39: 507000000
 +
 +
The scan process will then scan the other 38 discovered new transponders, and generate a dvb_channel.com with several entries with will have not only the physical channel/transponder info, but also the Service ID, and the corresponding audio/video/other program IDs (PID), like:
 +
 +
[Globo]
 +
SERVICE_ID = 5
 +
VIDEO_PID = 288
 +
AUDIO_PID = 289
 +
FREQUENCY = 573000000
 +
MODULATION = QAM/256
 +
INVERSION = OFF
 +
SYMBOL_RATE = 5247500
 +
INNER_FEC = NONE
 +
DELIVERY_SYSTEM = DVBC/ANNEX_A
 +
  
 
There are several options that could be used on dvbv5-scan:
 
There are several options that could be used on dvbv5-scan:

Revision as of 18:20, 12 September 2014

DVBv5 Tools (not to be confused with the similarly named, but much older, DVB tools legacy project) is a small set of command line utilities that was developed to be compliant with the newer features provided by version 5 of the DVB API.[1] The tools should also be backward compatible with the older v3 DVB API.

This DVB toolset suite resides in the v4l-utils git repository, and uses libdvbv5.

It is composed of 4 tools::

  • dvbv5-scan - Scans the channel transponders and gets the services available there;
  • dvbv5-zap - Locks into a channel (zap), allowing other applications to get the stream at the dvr devices or to monitor the stream;
  • dvb-fe-tool - Lists frontend properties and allow to manually set the DVB frontend
  • dvb-format-convert - Converts from/to other formats used by DVBv3 apps into the dvbv5 format.

The DVBv5 file format is formed by a channel name, followed by a series of key/value properties.

For example, this is a channel file with one DVB-C channel on it:

[CHANNEL]
	DELIVERY_SYSTEM = DVBC/ANNEX_A
	FREQUENCY = 573000000
	SYMBOL_RATE = 5217000
	INNER_FEC = NONE
	MODULATION = QAM/256
	INVERSION = AUTO

dvbv5-scan

A single physical channel (also called as transponder) may have several virtual channels inside it, encapsulated via a MPEG Transport stream.

Those virtual channels are called as "service" at the MPEG-TS terminology, and may have one or more audio, video and other types of elements inside it.

The dvbv5-scan goal is to scan for a list of physical channels/transponders and identify there the MPEG-TS services available.

The dvbv5-scan tool is smart enough to retrieve the information at the MPEG-TS Network Information Table (NIT) about other channels available on the stream.

Example:

$ dvbv5-scan ~/dvbc-test
Scanning frequency #1 573000000
Lock   (0x1f) Quality= Good Signal= 100.00% C/N= -13.80dB UCB= 0 postBER= 3.14x10^-3 PER= 0
Service SBT, provider (null): digital television
Service Globo, provider Globo: digital television
Service Record, provider (null): digital television
Service Band, provider (null): digital television
...
Service Trilhas Sonoras, provider (null): digital radio
New transponder/channel found: #2: 579000000
...
New transponder/channel found: #39: 507000000

The scan process will then scan the other 38 discovered new transponders, and generate a dvb_channel.com with several entries with will have not only the physical channel/transponder info, but also the Service ID, and the corresponding audio/video/other program IDs (PID), like:

[Globo]
	SERVICE_ID = 5
	VIDEO_PID = 288
	AUDIO_PID = 289
	FREQUENCY = 573000000
	MODULATION = QAM/256
	INVERSION = OFF
	SYMBOL_RATE = 5247500
	INNER_FEC = NONE
	DELIVERY_SYSTEM = DVBC/ANNEX_A


There are several options that could be used on dvbv5-scan:

dvbv5-scan parameters
parameter meaning
-3, --dvbv3 Use DVBv3 only
-a, --adapter=adapter# use given adapter (default 0)
-d, --demux=demux# use given demux (default 0)
-f, --frontend=frontend# use given frontend (default 0)
-F, --file-freqs-only don't use the other frequencies discovered during scan
-G, --get_frontend use data from get_frontend on the output file
-I, --input-format=format Input format: CHANNEL, DVBV5 (default: DVBV5). The input format is case insensitive
-l, --lnbf=LNBf_type type of LNBf to use. 'help' lists the available ones
-N, --nit use data from NIT table on the output file
-o, --output=file output filename (default: dvb_channel.conf)
-O, --output-format=format Output format: CHANNEL, ZAP, DVBV5 (default: DVBV5). The output format is case insensitive
-p, --parse-other-nit Parse the other NIT/SDT tables
-S, --sat_number=satellite_number satellite number. If not specified, disable DISEqC
-T, --timeout-multiply=factor Multiply scan timeouts by this factor
-U, --freq_bpf=frequency SCR/Unicable band-pass filter frequency to use, in kHz
-v, --verbose be (very) verbose
-w, --lna=LNA (0, 1, -1) enable/disable/auto LNA power
-W, --wait=time adds additional wait time for DISEqC command completion
-?, --help help
--usage Give a short usage message
-V, --version Print program version