Digital Devices DuoFlex C&T: Difference between revisions

From LinuxTVWiki
Jump to navigation Jump to search
(Added Compile Howto)
Line 35: Line 35:
Sources:
Sources:


<nowiki>hg clone http://linuxtv.org/hg/~endriss/media_build_experimental</nowiki>
<pre>hg clone http://linuxtv.org/hg/~endriss/media_build_experimental</pre>




2. Download Drivers and Compile:
2. Download Drivers and Compile:


<nowiki>cd media_build_experimental
<pre>cd media_build_experimental
make download
make download
make untar</nowiki>
make untar</pre>


3. optional: deselect unused modules:
3. optional: deselect unused modules:


<nowiki>make menuconfig</nowiki>
<pre>make menuconfig</pre>


4. Build Drivers
4. Build Drivers


<nowiki>make</nowiki>
<pre>make</pre>


5. install modules
5. install modules


<nowiki>make install
<pre>make install
modprobe ddbridge
modprobe ddbridge
modprobe ngene</nowiki>
modprobe ngene</pre>



== Tuning to DVB-C and DVB-T ==
== Tuning to DVB-C and DVB-T ==

Revision as of 15:42, 13 August 2011

Overview/Features

* PCI-e x1 (Bridge)
* Recieve  Dual DVB-C/DVB-T in high definition simultaneously
* Independent descrambling of two transponders
* DVB-C HDTV H264 decoding
* DVB-T SD Mpeg2 decoding
* Mixed Mode feature (2x DVB-C / 2x DVB-T / DVB-C & DVB-T)

Identification

PCI id: Multimedia controller: Device dd01:0003

and an extra PCI Bridge: PCI bridge: Intel Corporation N10/ICH 7 Family PCI Express Port 3 (rev 02)

Making it work

copied from VDR Portal (See Link below)

This uses Sources from: http://linuxtv.org/hg/~endriss/ngene-octopus-test: - ngene: cineS2(v3/v4/v5), SatixS2, PCIe-Bridge, mini PCIe-Bridge - ddbridge: Octopus, Octopus LE, cineS2(v6) - DuoFlex-S2, DuoFlex-CT, CI

and from http://powarman.dyndns.org/hgwebdir.cgi/v4l-dvb-saa716x: - TT S2-6400

Compilable with Kernel 2.6.35 and higher (2.6.30 and below doesn't work for sure).

How to Compile:

1. Download modified media_build:

Sources:

hg clone http://linuxtv.org/hg/~endriss/media_build_experimental


2. Download Drivers and Compile:

cd media_build_experimental
make download
make untar

3. optional: deselect unused modules:

make menuconfig

4. Build Drivers

make

5. install modules

make install
modprobe ddbridge
modprobe ngene

Tuning to DVB-C and DVB-T

See also