FPGA fw for NetUP Dual Universal CI: Difference between revisions

From LinuxTVWiki
Jump to navigation Jump to search
(fpga usage and simulation added)
No edit summary
 
(3 intermediate revisions by the same user not shown)
Line 4: Line 4:
Number of Logic Elements/Cells: 21280
Number of Logic Elements/Cells: 21280
Total RAM Bits: 774144
Total RAM Bits: 774144
Number of 3.125-Gbps transceivers: 4
Package: 324-FBGA (19x19)
Package: 324-FBGA (19x19)


Line 66: Line 67:


= Upload firmware (netup_unidvb_top.bin) to NetUP Universal Dual DVB-CI card =
= Upload firmware (netup_unidvb_top.bin) to NetUP Universal Dual DVB-CI card =
* load m25p80 if not already loaded
* load m25p80 (if not already loaded)
<pre>
<pre>
$ modprobe m25p80
$ modprobe m25p80
Line 73: Line 74:
* reload netup_unidvb.ko with spi_enable=1
* reload netup_unidvb.ko with spi_enable=1
<pre>
<pre>
$ rmmod netup_unidvb.ko && modprobe netup_unidvb.ko spi_enable=1)
$ rmmod netup_unidvb && modprobe netup_unidvb spi_enable=1
</pre>
</pre>


Line 113: Line 114:
Total PLLs 3 / 4 ( 75 % )
Total PLLs 3 / 4 ( 75 % )
</pre>
</pre>


<gallery perrow=1>
Image:netup_universal_dual_dvb_ci_fpga_layout.png|FPGA physical layout
</gallery>


= FPGA Simulation =
= FPGA Simulation =
Line 133: Line 139:


* Do simulation with "Simulate -> Run"
* Do simulation with "Simulate -> Run"

<gallery perrow=1>
Image:modelsim-netup-dual-dvb-ci.png|Simulation waveform screen
</gallery>

Latest revision as of 04:24, 15 February 2015

NetUP Dual Universal CI (NetUP_Dual_Universal_CI) built on FPGA: EP4CGX22CF19C8

Series: Cyclone IV GX
Number of Logic Elements/Cells: 21280
Total RAM Bits: 774144
Number of 3.125-Gbps transceivers: 4
Package: 324-FBGA (19x19)

Obtain firmware source code

Source code of firmware distributed under GPLv3 license and available on github:

git clone https://github.com/aospan/NetUP_Dual_Universal_CI-fpga

Firmware compilation

  • Install Altera Quartus II Web Edition (free). Current version 14.1
  • Open project (File->Open Project) Dual_Universal_CI.qpf
  • Run "Processing -> Start Compilation". Compilation will take about 6 minutes on fast CPU
  • Resulting firmware placed into out/netup_unidvb_top.sof file

Firmware preparation to upload into NetUP Universal Dual DVB-CI card

netup_unidvb_top.sof file should be converted to netup_unidvb_top.bin. Below commands tested on Ubuntu Linux 14.10 with Altera Quartus II installed into /mnt/sdb/altera/14.1 and openjdk-8-jre package installed

  • setup environment
$ /mnt/sdb/altera/14.1/nios2eds/nios2_command_shell.sh
------------------------------------------------
Altera Nios2 Command Shell [GCC 4]

Version 14.1, Build 186
------------------------------------------------
  • conversion to srec
$ java -Xmx512m -jar /mnt/sdb/altera/14.1/nios2eds/bin/sof2flash.jar --input=netup_unidvb_top.sof --output=netup_unidvb_top.srec --compress --epcs --offset=0
Info: *******************************************************************
Info: Running Quartus II 64-Bit Convert_programming_file
Info: Command: quartus_cpf --no_banner --convert --device=EPCS128 --option=netup_unidvb_top.opt netup_unidvb_top.sof netup_unidvb_top.pof
Info (210033): Memory Map File netup_unidvb_top.map contains memory usage information for file netup_unidvb_top.pof
Info: Quartus II 64-Bit Convert_programming_file was successful. 0 errors, 0 warnings
    Info: Peak virtual memory: 441 megabytes
    Info: Processing ended: Fri Feb 13 13:24:09 2015
    Info: Elapsed time: 00:00:01
    Info: Total CPU time (on all processors): 00:00:02
Info: *******************************************************************
Info: Running Quartus II 64-Bit Convert_programming_file
Info: Command: quartus_cpf --no_banner --convert netup_unidvb_top.pof netup_unidvb_top.rpd
Info: Quartus II 64-Bit Convert_programming_file was successful. 0 errors, 0 warnings
    Info: Peak virtual memory: 434 megabytes
    Info: Processing ended: Fri Feb 13 13:24:13 2015
    Info: Elapsed time: 00:00:02
    Info: Total CPU time (on all processors): 00:00:02
  • conversion to bin
$ /mnt/sdb/altera/14.1/nios2eds/bin/gnu/H-x86_64-pc-linux-gnu/bin/nios2-elf-objcopy -I srec -O binary netup_unidvb_top.srec netup_unidvb_top.bin

Upload firmware (netup_unidvb_top.bin) to NetUP Universal Dual DVB-CI card

  • load m25p80 (if not already loaded)
$ modprobe m25p80
  • reload netup_unidvb.ko with spi_enable=1
$ rmmod netup_unidvb && modprobe netup_unidvb spi_enable=1
  • check mtd file for proper mtd device number
$ cat /proc/mtd
dev:    size   erasesize  name
mtd0: 01000000 00040000 "fpga_04:00.0"
  • write firmware to flash
$ flashcp -v netup_unidvb_top.bin /dev/mtd0
Erasing blocks: 2/2 (100%)
Writing data: 387k/0k (100%)
Verifying data: 387k/0k (100%)

DONE

Remember to POWER OFF card (reset not enough) to new firmware take effect !

FPGA resource usage

For firmware based on source code from 13 Feb 2015:

Total logic elements	12,892 / 21,280 ( 61 % )
Total combinational functions	11,717 / 21,280 ( 55 % )
Dedicated logic registers	7,126 / 21,280 ( 33 % )
Total registers	7265
Total pins	147 / 167 ( 88 % )
Total virtual pins	0
Total memory bits	447,200 / 774,144 ( 58 % )
Embedded Multiplier 9-bit elements	0 / 80 ( 0 % )
Total GXB Receiver Channel PCS	1 / 4 ( 25 % )
Total GXB Receiver Channel PMA	1 / 4 ( 25 % )
Total GXB Transmitter Channel PCS	1 / 4 ( 25 % )
Total GXB Transmitter Channel PMA	1 / 4 ( 25 % )
Total PLLs	3 / 4 ( 75 % )


FPGA Simulation

Simulation files available in folder testbench. Some parts of firmware can be simulated (without real hardware).

  • start modelsim
$ /mnt/sdb/altera/14.1/modelsim_ase/bin/vsim
  • Open (File->Open) dvb_unici.mpf
  • In "Library" remove "work" and create it again (workaround for problem in modelsim)
  • Run "Compile->Compile All"
  • Choose Project (for example, "ci_control_tb") and run "Execute"
  • Do simulation with "Simulate -> Run"