FPGA fw for NetUP Dual Universal CI

From LinuxTVWiki
Revision as of 23:25, 13 February 2015 by Aospan (Talk | contribs)

(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to: navigation, search

NetUP Dual Universal CI (NetUP_Dual_Universal_CI) built on FPGA: EP4CGX22CF19C8

Series: Cyclone IV GX
Number of Logic Elements/Cells: 21280
Total RAM Bits: 774144
Package: 324-FBGA (19x19)

Firmware compilation

  • Install Altera Quartus II Web Edition (free). Current version 14.1
  • Open project (File->Open Project) Dual_Universal_CI.qpf
  • Run "Processing -> Start Compilation". Compilation will take about 6 minutes on fast CPU
  • Resulting firmware placed into out/netup_unidvb_top.sof file

Firmware preparation to upload into NetUP Universal Dual DVB-CI card

netup_unidvb_top.sof file should be converted to netup_unidvb_top.bin. Below commands tested on Ubuntu Linux 14.10 with Altera Quartus II installed into /mnt/sdb/altera/14.1 and openjdk-8-jre package installed

  • setup environment
$ /mnt/sdb/altera/14.1/nios2eds/nios2_command_shell.sh
------------------------------------------------
Altera Nios2 Command Shell [GCC 4]

Version 14.1, Build 186
------------------------------------------------
  • conversion to srec
$ java -Xmx512m -jar /mnt/sdb/altera/14.1/nios2eds/bin/sof2flash.jar --input=netup_unidvb_top.sof --output=netup_unidvb_top.srec --compress --epcs --offset=0
Info: *******************************************************************
Info: Running Quartus II 64-Bit Convert_programming_file
Info: Command: quartus_cpf --no_banner --convert --device=EPCS128 --option=netup_unidvb_top.opt netup_unidvb_top.sof netup_unidvb_top.pof
Info (210033): Memory Map File netup_unidvb_top.map contains memory usage information for file netup_unidvb_top.pof
Info: Quartus II 64-Bit Convert_programming_file was successful. 0 errors, 0 warnings
    Info: Peak virtual memory: 441 megabytes
    Info: Processing ended: Fri Feb 13 13:24:09 2015
    Info: Elapsed time: 00:00:01
    Info: Total CPU time (on all processors): 00:00:02
Info: *******************************************************************
Info: Running Quartus II 64-Bit Convert_programming_file
Info: Command: quartus_cpf --no_banner --convert netup_unidvb_top.pof netup_unidvb_top.rpd
Info: Quartus II 64-Bit Convert_programming_file was successful. 0 errors, 0 warnings
    Info: Peak virtual memory: 434 megabytes
    Info: Processing ended: Fri Feb 13 13:24:13 2015
    Info: Elapsed time: 00:00:02
    Info: Total CPU time (on all processors): 00:00:02
  • conversion to bin
$ /mnt/sdb/altera/14.1/nios2eds/bin/gnu/H-x86_64-pc-linux-gnu/bin/nios2-elf-objcopy -I srec -O binary netup_unidvb_top.srec netup_unidvb_top.bin

Upload firmware (netup_unidvb_top.bin) to NetUP Universal Dual DVB-CI card

  • load m25p80 if not already loaded
$ modprobe m25p80
  • reload netup_unidvb.ko with spi_enable=1
$ rmmod netup_unidvb.ko && modprobe netup_unidvb.ko spi_enable=1)
  • check mtd file for proper mtd device number
$ cat /proc/mtd
dev:    size   erasesize  name
mtd0: 01000000 00040000 "fpga_04:00.0"
  • write firmware to flash
$ flashcp -v netup_unidvb_top.bin /dev/mtd0
Erasing blocks: 2/2 (100%)
Writing data: 387k/0k (100%)
Verifying data: 387k/0k (100%)

DONE

Remember to POWER OFF card (reset not enough) to new firmware take effect !