# Difference between revisions of "Fitipower"

(Pre vco selection) |
(should be fairlt complete now) |
||

(One intermediate revision by one user not shown) | |||

Line 4: | Line 4: | ||

=Specifications= | =Specifications= | ||

− | Don't trust this blindly. Division is always integer division. | + | Don't trust this blindly. Division is always integer division. Set means prepare a place holder with value. Write means actually transmit the value from the placeholder. |

==Tuner general info == | ==Tuner general info == | ||

Line 152: | Line 152: | ||

=== Fix for low frequency's === | === Fix for low frequency's === | ||

− | if frequency < 45000 | + | *if frequency < 45000 |

− | * set tuner registry 1 to 0x06 | + | ** set tuner registry 1 to 0x06 |

− | * set tuner registry 2 to 0x11 | + | ** set tuner registry 2 to 0x11 |

=== Fix clock out === | === Fix clock out === | ||

Line 163: | Line 163: | ||

+ | === VCO calibration === | ||

+ | vco_cali is a 8bit wide parameter, | ||

+ | vco_sel is a pre-calculated parameter | ||

+ | |||

+ | |||

+ | Restart VCO calibration | ||

+ | * write 0x80 to tuner register 14 | ||

+ | Run VCO calibration | ||

+ | * write 0x00 to tuner register 14 | ||

+ | |||

+ | Read VCO calibration value | ||

+ | * write 0x00 to tuner register 14 | ||

+ | wait 10 milliseconds | ||

+ | * read tuner register 14 into vco_cali | ||

+ | |||

+ | Select VCO | ||

+ | * set vco_cali equal to vco_cali bitwise anded with 0x3f | ||

+ | |||

+ | * if vco_sel is equal to 0 | ||

+ | ** if vco_cali < 0x08 | ||

+ | *** set tuner registry 6 equal to tuner registry 6 bitwise anded with the bitwise complement of 0x18 | ||

+ | *** set tuner registry 6 equal to tuner registry 6 bitwise ored with 0x10 | ||

+ | *** set tuner registry 6 equal to tuner registry 6 bitwise ored with 0x20 | ||

+ | *** write tuner registry 6 | ||

+ | *** write 0x80 to tuner register 14 | ||

+ | *** write 0x00 to tuner register 14 | ||

+ | ** if vco_cali >= 0x08 | ||

+ | *** set tuner registry 6 equal to tuner registry 6 bitwise anded with the bitwise complement of 0x18 | ||

+ | *** set tuner registry 6 equal to tuner registry 6 bitwise ored with 0x00 | ||

+ | *** set tuner registry 6 equal to tuner registry 6 bitwise ored with 0x20 | ||

+ | *** write tuner registry 6 | ||

+ | * if vco_sel is equal to 1 | ||

+ | ** if vco_cali < 0x05 | ||

+ | *** set tuner registry 6 equal to tuner registry 6 bitwise anded with the bitwise complement of 0x18 | ||

+ | *** set tuner registry 6 equal to tuner registry 6 bitwise ored with 0x08 | ||

+ | *** set tuner registry 6 equal to tuner registry 6 bitwise ored with 0x20 | ||

+ | *** write tuner registry 6 | ||

+ | *** write 0x80 to tuner register 14 | ||

+ | *** write 0x00 to tuner register 14 | ||

+ | ** if 0x05<= vco_cali <= 0x30 | ||

+ | *** set tuner registry 6 equal to tuner registry 6 bitwise anded with the bitwise complement of 0x18 | ||

+ | *** set tuner registry 6 equal to tuner registry 6 bitwise ored with 0x10 | ||

+ | *** set tuner registry 6 equal to tuner registry 6 bitwise ored with 0x20 | ||

+ | *** write tuner registry 6 | ||

+ | ** if vco_cali > 0x30 | ||

+ | *** set tuner registry 6 equal to tuner registry 6 bitwise anded with the bitwise complement of 0x18 | ||

+ | *** set tuner registry 6 equal to tuner registry 6 bitwise ored with 0x00 | ||

+ | *** set tuner registry 6 equal to tuner registry 6 bitwise ored with 0x20 | ||

+ | *** write tuner registry 6 | ||

+ | *** write 0x80 to tuner register 14 | ||

+ | *** write 0x00 to tuner register 14 | ||

+ | * if vco_sel is greater then 1 | ||

+ | ** if vco_cali > 0x35 | ||

+ | *** set tuner registry 6 equal to tuner registry 6 bitwise anded with the bitwise complement of 0x18 | ||

+ | *** set tuner registry 6 equal to tuner registry 6 bitwise ored with 0x10 | ||

+ | *** set tuner registry 6 equal to tuner registry 6 bitwise ored with 0x20 | ||

+ | *** write tuner registry 6 | ||

+ | *** write 0x80 to tuner register 14 | ||

+ | *** write 0x00 to tuner register 14 | ||

+ | ** if vco_cali <= 0x35 | ||

+ | *** set tuner registry 6 equal to tuner registry 6 bitwise anded with the bitwise complement of 0x18 | ||

+ | *** set tuner registry 6 equal to tuner registry 6 bitwise ored with 0x08 | ||

+ | *** set tuner registry 6 equal to tuner registry 6 bitwise ored with 0x20 | ||

+ | *** write tuner registry 6 | ||

+ | |||

+ | * set tuner registry 16 equal to 0x0b | ||

+ | wait 10 milliseconds | ||

+ | * read tuner registry 13 | ||

+ | * set registry 13 equal to registry 13 ored with 0x10 | ||

+ | * write tuner registry 13 | ||

+ | * write tuner registry 16 | ||

[[Category:Tuners]] | [[Category:Tuners]] |

## Latest revision as of 20:54, 6 December 2009

Tuner used together with AF9035. http://www.fitipower.com.tw/main.htm?pid=9&ID=57

# Specifications

Don't trust this blindly. Division is always integer division. Set means prepare a place holder with value. Write means actually transmit the value from the placeholder.

## Tuner general info

I2C address is 0xC0. There are 18 8bit large tuner registers indexed from 0.

Index | Name |
---|---|

1 | FA |

2 | FP |

3,4 | XIN |

5 | VCO |

6 | VCO_SELECT |

14 | VCO_CALIBRATE |

## Init/Reset

Enable tuner:

- write 1 to GPIO 0xD8EB
- write 1 to GPIO 0xD8EC
- write 1 to GPIO 0xD8ED

Enable led:

- write 1 to GPIO 0xD8D1
- write 1 to GPIO 0xD8D0

## UnInit

Disable led:

- write 0 to GPIO 0xD8D1
- write 0 to GPIO 0xD8D0

## Tune

Tuning is based on 2 parameters:

- bandwidth in Hz, can be 6000,7000 or 8000
- frequency in Hz, can be the regular DVB-T frequency's

### Init tuning

- write 0x0F to tuner register 7
- write 0x3E to tuner register 8
- write 0xB8 to tuner register 10
- write 0x80 to tuner register 11
- write 0x04 to tuner register 13

### Generate the frequency of VCO and the VCO divider

fvco is a parameter

- if frequency < 54000
- set fvco to frequency * 64
- set tuner registry 5 to 0x82

- if 54000 =< frequency < 108000
- set fvco to frequency * 32
- set tuner registry 5 to 0x42

- if 108000=< frequency < 216000
- set fvco to frequency * 16
- set tuner registry 5 to 0x22

- if 216000=< frequency < 432000
- set fvco to frequency * 8
- set tuner registry 5 to 0x12

- if frequency > 432000
- set fvco to frequency * 4
- set tuner registry 5 to 0x0A

### Calculate XIN

fraction is a 16bit unsigned parameter, xin is a parameter, fvco is a pre-calculated parameter, xdiv is a parameter

- set xdiv equal to fvco / 18000
- set fraction equal to fvco minus xdiv multiplied by 18000
- set fraction equal to fraction left shifted 15 times and then divided by 18000
- if fraction is greater or equal to 16384
- set fractional equal to fractional plus 32768

- if fraction is equal to 0
- set xin equal to 0

- if 0 < fraction < 511
- set xin equal to 0x200

- if 511 < fraction <= 65025
- set xin equal to fraction

- if 65025 < fraction
- set xin equal to 0xfe00

- write xin right shifted 8 times to tuner register 3
- write xin only 8 low bits to tuner register 4

### Calculate FP and FA

fvco is a pre-calculated parameter, xdiv is a pre-calculated parameter, xdivr is a parameter, fp is a 8 bit wide parameter, fa is a parameter

- set xdivr equal to xdiv
- if fvco minus xdiv multiplied by 18000 is greater equal to 9000
- set xdivr equal to xdiv + 1

- set fp equal to xdivr / 8
- set fa equal to xdivr minus fp left shifted 3 times
- if fa is less then 2
- set fp equal fp minus 1
- set fa equal fa plus 8

- write fa to tuner register 1
- write fp to tuner register 2

### Select bandwidth

- if bandwidth = 8000
- set tuner registry 6 to 0x0

- if bandwidth = 7000
- set tuner registry 6 to 0x40

- if bandwidth = 6000
- set tuner registry 6 to 0x80

### Pre VCO selection

fvco is a pre-calculated parameter, vco_sel is a parameter

- if fvco < 2320000
- set vco_sel equal to 0
- set tuner registry 6 equal to tuner registry 6 bitwise anded with the bitwise complement of 0x18

- if 2320000 <= fvco < 3080000
- set vco_sel equal to 1
- set tuner registry 6 equal to tuner registry 6 bitwise or'ed with 0x10

- if 3080000 <= fvco
- set vco_sel equal to 1
- set tuner registry 6 equal to tuner registry 6 bitwise or'ed with 0x08

### Fix for low frequency's

- if frequency < 45000
- set tuner registry 1 to 0x06
- set tuner registry 2 to 0x11

### Fix clock out

- set tuner registry 6 to the result of a bitwise OR between tuner registry 6 and 0x20

### Write frequency parameters

- write tuner registry 0-6

### VCO calibration

vco_cali is a 8bit wide parameter, vco_sel is a pre-calculated parameter

Restart VCO calibration

- write 0x80 to tuner register 14

Run VCO calibration

- write 0x00 to tuner register 14

Read VCO calibration value

- write 0x00 to tuner register 14

wait 10 milliseconds

- read tuner register 14 into vco_cali

Select VCO

- set vco_cali equal to vco_cali bitwise anded with 0x3f

- if vco_sel is equal to 0
- if vco_cali < 0x08
- set tuner registry 6 equal to tuner registry 6 bitwise anded with the bitwise complement of 0x18
- set tuner registry 6 equal to tuner registry 6 bitwise ored with 0x10
- set tuner registry 6 equal to tuner registry 6 bitwise ored with 0x20
- write tuner registry 6
- write 0x80 to tuner register 14
- write 0x00 to tuner register 14

- if vco_cali >= 0x08
- set tuner registry 6 equal to tuner registry 6 bitwise anded with the bitwise complement of 0x18
- set tuner registry 6 equal to tuner registry 6 bitwise ored with 0x00
- set tuner registry 6 equal to tuner registry 6 bitwise ored with 0x20
- write tuner registry 6

- if vco_cali < 0x08
- if vco_sel is equal to 1
- if vco_cali < 0x05
- set tuner registry 6 equal to tuner registry 6 bitwise anded with the bitwise complement of 0x18
- set tuner registry 6 equal to tuner registry 6 bitwise ored with 0x08
- set tuner registry 6 equal to tuner registry 6 bitwise ored with 0x20
- write tuner registry 6
- write 0x80 to tuner register 14
- write 0x00 to tuner register 14

- if 0x05<= vco_cali <= 0x30
- set tuner registry 6 equal to tuner registry 6 bitwise anded with the bitwise complement of 0x18
- set tuner registry 6 equal to tuner registry 6 bitwise ored with 0x10
- set tuner registry 6 equal to tuner registry 6 bitwise ored with 0x20
- write tuner registry 6

- if vco_cali > 0x30
- set tuner registry 6 equal to tuner registry 6 bitwise anded with the bitwise complement of 0x18
- set tuner registry 6 equal to tuner registry 6 bitwise ored with 0x00
- set tuner registry 6 equal to tuner registry 6 bitwise ored with 0x20
- write tuner registry 6
- write 0x80 to tuner register 14
- write 0x00 to tuner register 14

- if vco_cali < 0x05
- if vco_sel is greater then 1
- if vco_cali > 0x35
- set tuner registry 6 equal to tuner registry 6 bitwise anded with the bitwise complement of 0x18
- set tuner registry 6 equal to tuner registry 6 bitwise ored with 0x10
- set tuner registry 6 equal to tuner registry 6 bitwise ored with 0x20
- write tuner registry 6
- write 0x80 to tuner register 14
- write 0x00 to tuner register 14

- if vco_cali <= 0x35
- set tuner registry 6 equal to tuner registry 6 bitwise anded with the bitwise complement of 0x18
- set tuner registry 6 equal to tuner registry 6 bitwise ored with 0x08
- set tuner registry 6 equal to tuner registry 6 bitwise ored with 0x20
- write tuner registry 6

- if vco_cali > 0x35

- set tuner registry 16 equal to 0x0b

wait 10 milliseconds

- read tuner registry 13
- set registry 13 equal to registry 13 ored with 0x10
- write tuner registry 13
- write tuner registry 16