Geniatech/MyGica X8507 PCI-Express Hybrid Card: Difference between revisions

From LinuxTVWiki
Jump to navigation Jump to search
mNo edit summary
Line 6: Line 6:


===Components Used===
===Components Used===
* [[Xceive_XC5000]] (tuner)
* [http://www.xceive.com/technology_XC5000.htm Xceive xc5000] (tuner)
* [http://www.fujitsu.com/downloads/MICRO/fme/documentation/M17_MB86A20S_OFDM_Demodulator.pdf Fugitsu MB86A20s] (demodulator)
* [http://www.fujitsu.com/downloads/MICRO/fme/documentation/M17_MB86A20S_OFDM_Demodulator.pdf Fugitsu MB86A20s] (demodulator)
* [http://www.conexant.com/products/entry.jsp?id=393 Conexant cx23885] (A/V decoder and PCI Interface)
* [http://www.conexant.com/products/entry.jsp?id=393 Conexant cx23885] (A/V decoder and PCI Interface)

Revision as of 03:11, 30 September 2009

PCI-Express receiver card, it allows you access free-to-air Brazilian standard digital terrestrial TV , analogue TV, FM radio and digital radio. It record and save TV programs directly in MPEG-II/H264 TS file.

Overview/Features

  • PCI-e interface
  • Inputs: Antenna, S-Video, Composite, YPbPr, IR and Stereo Audio

Components Used

Other Images

MyGica X8507 board cx23885 mb86a20s xc5000

Identification

# lspci -vvvnn
03:00.0 Multimedia video controller [0400]: Conexant Systems, Inc. CX23885 PCI Video and Audio Decoder [14f1:8852] (rev 02)
       Subsystem: Conexant Systems, Inc. Device [14f1:8502]
       Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
       Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
       Latency: 0, Cache Line Size: 32 bytes
       Interrupt: pin A routed to IRQ 18
       Region 0: Memory at fe800000 (64-bit, non-prefetchable) [size=2M]
       Capabilities: [40] Express (v1) Endpoint, MSI 00
               DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us
                       ExtTag- AttnBtn- AttnInd- PwrInd- RBE- FLReset-
               DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
                       RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+
                       MaxPayload 128 bytes, MaxReadReq 512 bytes
               DevSta: CorrErr- UncorrErr+ FatalErr- UnsuppReq+ AuxPwr- TransPend-
               LnkCap: Port #0, Speed 2.5GT/s, Width x1, ASPM L0s L1, Latency L0 <2us, L1 <4us
                       ClockPM- Suprise- LLActRep- BwNot-
               LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk-
                       ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
               LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
       Capabilities: [80] Power Management version 2
               Flags: PMEClk- DSI+ D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold-)
               Status: D0 PME-Enable- DSel=0 DScale=0 PME-
       Capabilities: [90] Vital Product Data <?>
       Capabilities: [a0] Message Signalled Interrupts: Mask- 64bit+ Count=1/1 Enable-
               Address: 0000000000000000  Data: 0000
       Capabilities: [100] Advanced Error Reporting
               UESta:  DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq+ ACSVoil-
               UEMsk:  DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSVoil-
               UESvrt: DLP+ SDES- TLP- FCP+ CmpltTO- CmpltAbrt- UnxCmplt- RxOF+ MalfTLP+ ECRC- UnsupReq- ACSVoil-
               CESta:  RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr-
               CESta:  RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr-
               AERCap: First Error Pointer: 14, GenCap- CGenEn- ChkCap- ChkEn-
       Capabilities: [200] Virtual Channel <?>
       Kernel driver in use: cx23885
       Kernel modules: cx23885

Making it Work

Firmware

Drivers

Sample Kernel Output

# dmesg
cx23885 driver version 0.0.2 loaded
vendor=8086 device=3a44
cx23885 0000:03:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
cx23885[0]: Your board isn't known (yet) to the driver.
cx23885[0]: Try to pick one of the existing card configs via
cx23885[0]: card=<n> insmod option.  Updating to the latest
cx23885[0]: version might help as well.
cx23885[0]: Here is a list of valid choices for the card=<n> insmod option:
cx23885[0]:    card=0 -> UNKNOWN/GENERIC
cx23885[0]:    card=1 -> Hauppauge WinTV-HVR1800lp
cx23885[0]:    card=2 -> Hauppauge WinTV-HVR1800
cx23885[0]:    card=3 -> Hauppauge WinTV-HVR1250
cx23885[0]:    card=4 -> DViCO FusionHDTV5 Express
cx23885[0]:    card=5 -> Hauppauge WinTV-HVR1500Q
cx23885[0]:    card=6 -> Hauppauge WinTV-HVR1500
cx23885[0]:    card=7 -> Hauppauge WinTV-HVR1200
cx23885[0]:    card=8 -> Hauppauge WinTV-HVR1700
cx23885[0]:    card=9 -> Hauppauge WinTV-HVR1400
cx23885[0]:    card=10 -> DViCO FusionHDTV7 Dual Express
cx23885[0]:    card=11 -> DViCO FusionHDTV DVB-T Dual Express
cx23885[0]:    card=12 -> Leadtek Winfast PxDVR3200 H
cx23885[0]:    card=13 -> Compro VideoMate E650F
cx23885[0]:    card=14 -> TurboSight TBS 6920
cx23885[0]:    card=15 -> TeVii S470
cx23885[0]:    card=16 -> DVBWorld DVB-S2 2005
cx23885[0]:    card=17 -> NetUP Dual DVB-S2 CI
cx23885[0]:    card=18 -> Hauppauge WinTV-HVR1270
cx23885[0]:    card=19 -> Hauppauge WinTV-HVR1275
cx23885[0]:    card=20 -> Hauppauge WinTV-HVR1255
cx23885[0]:    card=21 -> Hauppauge WinTV-HVR1210
cx23885[0]:    card=22 -> Mygica X8506 DMB-TH
cx23885[0]:    card=23 -> Magic-Pro ProHDTV Extreme 2
cx23885[0]:    card=24 -> Hauppauge WinTV-HVR1850
cx23885[0]:    card=25 -> Compro VideoMate E800
CORE cx23885[0]: subsystem: 14f1:8502, board: UNKNOWN/GENERIC [card=0,autodetected]
cx23885_dev_checkrevision() Hardware revision = 0xb0
cx23885[0]/0: found at 0000:03:00.0, rev: 2, irq: 18, latency: 0, mmio: 0xfe800000
cx23885 0000:03:00.0: setting latency timer to 64

Remote Control Support

External Links

Retrieved from "https://www.linuxtv.org/wiki/index.php?title=Geniatech/MyGica_X8507_PCI-Express_Hybrid_Card&oldid=25313"