Difference between revisions of "Hauppauge DEC2000-T USB"

From LinuxTVWiki
Jump to: navigation, search
m (fixed link)
(Add to USB category.)
Line 50: Line 50:

Revision as of 23:28, 21 January 2008

A DVB-T USB 1.1 device from Hauppauge (actually manufactured by TechnoTrend) that can be used either as a PC peripheral or as a standalone STB.

Linux driver exists, Audio and Video work.


 Card can only deliver a partial/modified TS stream to userspace.
 Card has an onboard hardware video+audio decoder.
 card driver: ttusb-dec
 interface: USB1.1
 USB device id: 0b48:1008
 Notes: These cards have the frontend hidden behind a USB interface  

Based on the AV711x MPEG-2 Decoder and the TDA10045 Demodulator.

It will not work with VDR as a primary device because it does not have a hardware MPEG-2 decoder. It can be used with soft-device, streaming or xine or as secondary device.

I have not been able to find a CAM for Top-up TV in the UK despite Hauppauge providing them for other models. There is space for a CAM in the version of the hardware supplied with the 1.26 firmware.

The DEC is a set-top boxes equipped with a USB port and can be used without a PC. The TV-Out can't be used for PC output.

The following drivers are needed for this device:

 - ttusbdecfe.ko
 - ttusb_dec.ko
Device / Model Type Hardware Firmware URL / Pictures
Comments & quirks
Hauppauge DEC2000-T USB (DVB-T) USB1.1 DEC-specific dvb-ttusb-dec-2000t.fw [1]

Under Debian

  • Follow the instructions in /usr/src/kernel-source-2.6.8/Documentation/dvb/.
  • Use v1.26 of the firmware. Look on archive.org and use zip -F after download if necessary. The most recent version (1.28a?) did not work for me.
  • Install dvb-utils
  • Playback and channel changing (via the playlist) is possible with gxine.
    • Set up the channels with
scan -o zap /usr/share/doc/dvb-utils/examples/scan/<country>-<region> > ~/.xine/channels.conf
    • I've had problems with the picture not displaying, but that could be a driver problem.
  • You can record programs with
tzap "Channel id" -r & cat /dev/dvb/adapter0/dvr0 > "Programme.mpeg" &