Hauppauge WinTV-CI: Difference between revisions

From LinuxTVWiki
Jump to navigation Jump to search
m (→‎Overview/features: Specific version number.)
Line 28: Line 28:


===Driver===
===Driver===
There is no Linux driver for this device yet
There is a working driver which was successfully tested with VDR and the ddci2-plugin.
Sources and instruction can be found here:
[https://github.com/siricco/usb2ci]

See also the discussion in the german vdr-portalforum:
[https://www.vdr-portal.de/forum/index.php?thread/130720-wintv-ci-cinergy-usb-ci-und-ddci2/]

This is the log with the driver initialisation and communication with vdr/ddci2:
[[File:/root/down/wintv-usb2ci.txt]]


===External links===
===External links===

Revision as of 22:12, 11 March 2018

A Hauppauge WinTV-CI

The Hauppauge WinTV-CI is a standalone CI-interface from Hauppauge.

Overview/features

The WinTV-CI is a bus-powered USB 2.0 device that provides a CI interface for PayTV.

According to Hauppauge, the Windows driver supports following CAMs:

  • AlphaCrypt
  • Conax
  • Irdeto
  • Mediaguard
  • AstonCrypt
  • CryptoWorks
  • Viacess

Components used

The box contains a single PCB with two active components : an FX2 from Cypress (CY7C68013A) and a FPGA (Actel Proasic-plus, APA075-F)

Identification

dmesg output:

  usb 1-7: new high speed USB device using ehci_hcd and address 2
  usb 1-7: new device found, idVendor=2040, idProduct=1100
  usb 1-7: new device strings: Mfr=0, Product=0, SerialNumber=0
  usb 1-7: configuration #1 chosen from 1 choice

Making it work

Driver

There is a working driver which was successfully tested with VDR and the ddci2-plugin. Sources and instruction can be found here: [1]

See also the discussion in the german vdr-portalforum: [2]

This is the log with the driver initialisation and communication with vdr/ddci2: File:/root/down/wintv-usb2ci.txt

External links