Hauppauge WinTV-HVR-1700

The Hauppauge WinTV-HVR-1700 is a hybrid analogue and DVB-T PCIe card with a hardware MPEG2 encoder. http://www.hauppauge.com.sg/web-content/images/hvr1700banner.jpg

Components Used

• Conexant CX23885 PCIe A/V Decoder
• Conexant CX23417 MPEGII A/V Encoder

Identification

14f1:8852

 02:00.0 Multimedia video controller [0400]: Conexant Unknown device [14f1:8852] (rev 02)
         Subsystem: Hauppauge computer works Inc. Unknown device [0070:8101]
         Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
         Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
         Latency: 0, Cache Line Size: 64 bytes
         Interrupt: pin A routed to IRQ 18
         Region 0: Memory at fe800000 (64-bit, non-prefetchable) [size=2M]
         Capabilities: [40] Express Endpoint IRQ 0
               Device: Supported: MaxPayload 128 bytes, PhantFunc 0, ExtTag-
               Device: Latency L0s <64ns, L1 <1us
               Device: AtnBtn- AtnInd- PwrInd-
               Device: Errors: Correctable- Non-Fatal- Fatal- Unsupported-
               Device: RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop+
               Device: MaxPayload 128 bytes, MaxReadReq 512 bytes
               Link: Supported Speed 2.5Gb/s, Width x1, ASPM L0s L1, Port 0
               Link: Latency L0s <2us, L1 <4us
               Link: ASPM Disabled RCB 64 bytes CommClk+ ExtSynch-
               Link: Speed 2.5Gb/s, Width x1
         Capabilities: [80] Power Management version 2
               Flags: PMEClk- DSI+ D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold-)
               Status: D0 PME-Enable- DSel=0 DScale=0 PME-
         Capabilities: [90] Vital Product Data
         Capabilities: [a0] Message Signalled Interrupts: Mask- 64bit+ Queue=0/0 Enable-
               Address: 0000000000000000  Data: 0000

8852

 01:00.0 Multimedia video controller: Conexant Unknown device 8852 (rev 02)
       Subsystem: Hauppauge computer works Inc. Unknown device 8101
       Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
       Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
       Latency: 0, Cache Line Size: 32 bytes
       Interrupt: pin A routed to IRQ 16
       Region 0: Memory at e0200000 (64-bit, non-prefetchable) [size=2M]
       Capabilities: [40] Express Endpoint IRQ 0
               Device: Supported: MaxPayload 128 bytes, PhantFunc 0, ExtTag-
               Device: Latency L0s <64ns, L1 <1us
               Device: AtnBtn- AtnInd- PwrInd-
               Device: Errors: Correctable- Non-Fatal- Fatal- Unsupported-
               Device: RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+
               Device: MaxPayload 128 bytes, MaxReadReq 512 bytes
               Link: Supported Speed 2.5Gb/s, Width x1, ASPM L0s L1, Port 0
               Link: Latency L0s <2us, L1 <4us
               Link: ASPM Disabled RCB 64 bytes CommClk- ExtSynch-
               Link: Speed 2.5Gb/s, Width x1
       Capabilities: [80] Power Management version 2
               Flags: PMEClk- DSI+ D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold-)
               Status: D0 PME-Enable- DSel=0 DScale=0 PME-
       Capabilities: [90] Vital Product Data
       Capabilities: [a0] Message Signalled Interrupts: Mask- 64bit+ Queue=0/0 Enable-
               Address: 0000000000000000  Data: 0000

External Links

• WinTV-HVR-1700 product page
• high resolution picture